Search by VIN / Frame, vehicle make, model, type, unit name, or by the part number of any oil:
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1151313-001
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Recomendations | Alpina |
Alpina
|
||
| Suitable for | Polaris |
Polaris
|
||
| Density at 20 °C | g/cm³ | 842.3 | EN ISO 12185 |
842.3
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.88 | DIN 51562-1 |
17.88
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 109.2 | DIN 51562-1 |
109.2
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 182 | DIN ISO 2909 |
182
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 3640 | ASTM D5293 |
3640
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 7.83 | ASTM D2896 |
7.83
mgKOH/g
ASTM D2896
|
| Approvals | Alpina |
Alpina
|
||
| Phosphorus content | mg/kg | 6,6 | ASTM D5800 |
6,6
mg/kg
ASTM D5800
|
| Recommendations | Alpina, Polaris |
Alpina, Polaris
|
For engine
RAVENOL VMP SAE 5W-30 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00
Compliance with the requirements:
Audi Motorsport V31 748 026, Chrysler MS-11106, Fiat 9.55535-S1, MB 229.31, Stellantis FPW9.55535/03, VW G 052 195
- Available packaging
- Product parameters
Volume:
1000 L
Vendor code:
1111122-700
Volume:
208 L, print
Vendor code:
1111122-D28-01-888
Code:
4014835723306
Volume:
1 L
Vendor code:
1111122-001
1111122-001-01-999
Code:
4014835723313
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
RAVENOL VMP SAE 5W-30 is based on additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL VMP SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in the cold running phase.
Due to a significant fuel economy RAVENOL VMP SAE 5W-30 contributes by reduction of emissions to conservation the environment. Minimal wear extends the lifespan of the engine.
RAVENOL VMP SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application instructions
RAVENOL VMP SAE 5W-30 is a universal fuel economy, especially collected engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter. Due to the specific composition is RAVENOL VMP SAE 5W-30 excellent suitable for use for several of the latest OEM requirements.
Characteristics
- Fuel economy in part and full power operation
- MID SAPS = reduced Sulphated ash, Phosphor and Sulfur
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the longlife of the engine
- Excellent cold starting characteristics also at low temperatures
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00 |
BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00
|
||
| Recomendations | Audi Motorsport V31 748 026, Chrysler MS-11106, Fiat 9.55535-S1, MB 229.31, Stellantis FPW9.55535/03, VW G 052 195 |
Audi Motorsport V31 748 026, Chrysler MS-11106, Fiat 9.55535-S1, MB 229.31, Stellantis FPW9.55535/03, VW G 052 195
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.9 | DIN 51562-1 |
11.9
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 66.3 | DIN 51562-1 |
66.3
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 179 | DIN ISO 2909 |
179
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4740 | ASTM D5293 |
4740
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 12.000 | ASTM D4684 |
12.000
mPa*s
ASTM D4684
|
| Noack Volatility | % | 6.4 | ASTM D5800 |
6.4
%
ASTM D5800
|
| tbn | mgKOH/g | 8.8 | ASTM D2896 |
8.8
mgKOH/g
ASTM D2896
|
| Approvals | Audi Motorsport V31 748 026, BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-S1, MB 229.31, MB 229.51, Porsche C30, Stellantis FPW9.55535/03, VW 504.00, VW 507.00, VW G 052 195 |
Audi Motorsport V31 748 026, BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-S1, MB 229.31, MB 229.51, Porsche C30, Stellantis FPW9.55535/03, VW 504.00, VW 507.00, VW G 052 195
|
||
| Recommendations | Audi Motorsport V31 748 026, BMW 83210398507, BMW/Mini 83 21 0 398 508, Chrysler MS-11106, Fiat 9.55535-S1, MB (A 000 989 89 01 10), MB 229.31, Stellantis FPW9.55535/03, VW/Audi G 052 195 M2, VW/Audi G 052 195 M4, VW/Audi G 052 195 M6 |
Audi Motorsport V31 748 026, BMW 83210398507, BMW/Mini 83 21 0 398 508, Chrysler MS-11106, Fiat 9.55535-S1, MB (A 000 989 89 01 10), MB 229.31, Stellantis FPW9.55535/03, VW/Audi G 052 195 M2, VW/Audi G 052 195 M4, VW/Audi G 052 195 M6
|
||
| Application area | Audi Motorsport V31 748 026 |
Audi Motorsport V31 748 026
|
Engine oil
RAVENOL SSO SAE 0W-30 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-98, MB-Approval 229.5, Renault RN 0710, VW 502.00, VW 505.00, Volvo VCC 95200356 - Service Fill
Compliance with the requirements:
BMW Longlife-01, GM GM-LL-A-025, GM GM-LL-B-025, Renault RN 0700, VW 503.01
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1111100-010
1111100-010-01-999
Code:
4014835718340
Volume:
60 L
Vendor code:
1111100-060
Volume:
208 L
Vendor code:
1111100-208
1111100-208-01-999
Code:
4014835718388
Volume:
1000 L
Vendor code:
1111100-700
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
With its new formulation, RAVENOL SSO SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL SSO SAE 0W-30 helps to protect the environment by reducing emissions.
RAVENOL SSO SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL SSO SAE 0W-30 is universal, fuel-efficient engine oil. It is a premium product for gasoline and diesel engine passenger cars. Suitable for all petrol and diesel passenger cars with and without turbo charger, especially recommended for full synthetic all-season motor oils.
Characteristics
- Universal application in all modern petrol and diesel engines.
- Quick lubrication of the engine even at temperatures below -30 °C.
- Low evaporation tendency, therefore a lower oil consumption.
- Safety against accumulation of sludge, coking and corrosion even under unfavourable operating conditions.
- Guarantee of the function of the hydro tappets at all temperatures.
- No oil limited deposits in combustion chambers, at the piston ring and valves.
- Unchanged viscosity during the whole oil change interval, high viscosity index.
- Neutral against sealing materials.
- Miscibility with all commercially available engine oils. Flushing is not required.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | BMW Longlife-98, MB-Approval 229.5, Renault RN 0710, VW 502.00, VW 505.00, Volvo VCC 95200356 - Service Fill |
BMW Longlife-98, MB-Approval 229.5, Renault RN 0710, VW 502.00, VW 505.00, Volvo VCC 95200356 - Service Fill
|
||
| Recomendations | BMW Longlife-01, GM GM-LL-A-025, GM GM-LL-B-025, Renault RN 0700, VW 503.01 |
BMW Longlife-01, GM GM-LL-A-025, GM GM-LL-B-025, Renault RN 0700, VW 503.01
|
||
| Density at 20 °C | g/cm³ | 843 | EN ISO 12185 |
843
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 60.9 | DIN 51562-1 |
60.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 198 | DIN ISO 2909 |
198
DIN ISO 2909
|
|
| CCS Viscosity at -35 °C | mPa*s | 5580 | ASTM D5293 |
5580
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 16.300 | ASTM D4684 |
16.300
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9.2 | ASTM D5800 |
9.2
%
ASTM D5800
|
| tbn | mgKOH/g | 12.5 | ASTM D2896 |
12.5
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-01, BMW Longlife-98, GM GM-LL-A-025, GM GM-LL-B-025, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 503.01, VW 505.00, Volvo VCC 95200356 - Service Fill |
BMW Longlife-01, BMW Longlife-98, GM GM-LL-A-025, GM GM-LL-B-025, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 503.01, VW 505.00, Volvo VCC 95200356 - Service Fill
|
||
| Recommendations | BMW Longlife-01, GM-LL-A-025, GM-LL-B-025, Renault RN0700, VW 503 01 |
BMW Longlife-01, GM-LL-A-025, GM-LL-B-025, Renault RN0700, VW 503 01
|
For racing engines
RAVENOL REP Racing Extra Performance SAE 5W-30 was developed together with Ralf Schumacher for motorsport and is ideally suited for car racing, even when subject to the highest levels of strain. This is confirmed by his signature on the label. Although it was designed specifically as a racing oil, RAVENOL REP Racing Extra Performance SAE 5W-30 has passed all necessary tests and thus received official approvals of the car manufacturers for everyday use. RAVENOL REP Racing Extra Performance SAE 5W-30 offers significantly better protection for petrol engines than ordinary engine oils.
Manufacturer Approved:
BMW Longlife-04, GM dexos2®, MB-Approval 226.5, MB-Approval 229.51, MB-Approval 229.52, Opel OV 040 1547 - D30, Renault RN 0710
Compliance with the requirements:
Renault RN 0700
- Available packaging
- Product parameters
Volume:
60 L, print
Vendor code:
1141088-D60
Volume:
208 L
Vendor code:
1141088-208
Volume:
208 L, print
Vendor code:
1141088-D28
Volume:
1000 L
Vendor code:
1141088-700
Volume:
60 L
Vendor code:
1141088-060
1141088-060-01-999
RAVENOL REP Racing Extra Performance SAE 5W-30 is a modern, PAO (poly-alpha-olefin) based full synthetic multigrade engine oil with USVO® Technology.
RAVENOL REP Racing Extra Performance SAE 5W-30 is ideally suited for gasoline engines for car racing, even when subject to the highest levels of strain.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
Due to its high viscosity index, extreme shear stability and a highly effective special novel additivation RAVENOL REP Racing Extra Performance SAE 5W-30 is also suitable for an extremely sporty driving style.
RAVENOL REP Racing Extra Performance SAE 5W-30 achieves a secure lubrication layer thanks to its unique formulation even at very high operating temperatures, protection from corrosion (oxidation) and foaming.
Application instructions
RAVENOL REP Racing Extra Performance SAE 5W-30 can be used as special oil for car race even under most difficult conditions.
Characteristics
- Ultra-modern full synthetic engine oil for car race
- Safe lubricating layer at very high operating temperatures
- Very stable and excellent viscosity behaviour
- Very low evaporation tendency
- Very good cold start characteristics
- Very good detergent and dispersant characteristics
- Good protection against corrosion and foam formation
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, GM dexos2®, MB-Approval 226.5, MB-Approval 229.51, MB-Approval 229.52, Opel OV 040 1547 - D30, Renault RN 0710 |
BMW Longlife-04, GM dexos2®, MB-Approval 226.5, MB-Approval 229.51, MB-Approval 229.52, Opel OV 040 1547 - D30, Renault RN 0710
|
||
| Recomendations | Renault RN 0700 |
Renault RN 0700
|
||
| Rennstrecken-Partnerschaft | Nürburgring |
Nürburgring
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 73.4 | DIN 51562-1 |
73.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 165 | DIN ISO 2909 |
165
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4301 | ASTM D5293 |
4301
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 13.400 | ASTM D4684 |
13.400
mPa*s
ASTM D4684
|
| Noack Volatility | % | 6.2 | ASTM D5800 |
6.2
%
ASTM D5800
|
| tbn | mgKOH/g | 8.1 | ASTM D2896 |
8.1
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-04, GM dexos2®, MB 226.5, MB 229.51, MB 229.52, Opel OV 040 1547 - D30, Renault RN0700, Renault RN0710 |
BMW Longlife-04, GM dexos2®, MB 226.5, MB 229.51, MB 229.52, Opel OV 040 1547 - D30, Renault RN0700, Renault RN0710
|
||
| Recommendations | Renault RN0700 |
Renault RN0700
|
Synthetic racing motor oil
RAVENOL RSP Racing Super Performance SAE 5W-30 was developed together with Ralf Schumacher for motorsport and is ideally suited for car racing, even when subject to the highest levels of strain. This is confirmed by his signature on the label. Although it was designed specifically as a racing oil, RAVENOL RSP Racing Super Performance SAE 5W-30 has passed all necessary tests and thus received official approvals of the car manufacturers for everyday use. RAVENOL RSP Racing Super Performance SAE 5W-30 offers significantly better protection for petrol and diesel engines than ordinary engine oils.
Manufacturer Approved:
BMW Longlife-01, MB-Approval 229.5, Renault RN 0700, Renault RN 0710
- Available packaging
- Product parameters
Volume:
60 L
Vendor code:
1141089-060
Volume:
60 L, print
Vendor code:
1141089-D60
Volume:
208 L
Vendor code:
1141089-208
Volume:
208 L, print
Vendor code:
1141089-D28
RAVENOL RSP Racing Super Performance SAE 5W-30 is a modern, PAO (poly-alpha-olefin) based full synthetic multigrade engine oil with USVO® Technology for petrol and diesel engines.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
Due to its high viscosity index, good shear stability and a highly effective special novel additivation, RAVENOL RSP Racing Super Performance SAE 5W-30 is also suitable for extremely sporty driving styles.
RAVENOL RSP Racing Super Performance SAE 5W-30 provides a safe layer of lubrication, even at very high operating temperatures. Extensive protection against corrosion (oxidation) and foaming.
Application instructions
RAVENOL RSP Racing Super Performance SAE 5W-30 is ideally suited for car racing, even when subject to the highest levels of strain.
Characteristics
- Ultra-modern full synthetic engine oil for car race with special additivation
- Safe lubricating layer at very high operating temperatures
- High HTHS value, very good shear stability
- Very stable and excellent viscosity behaviour
- Very low evaporation tendency
- Very good cold start characteristics
- Very good detergent and dispersant characteristics
- Good protection against corrosion and foam formation
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | BMW Longlife-01, MB-Approval 229.5, Renault RN 0700, Renault RN 0710 |
BMW Longlife-01, MB-Approval 229.5, Renault RN 0700, Renault RN 0710
|
||
| Recomendations | VW 502.00, VW 505.00 |
VW 502.00, VW 505.00
|
||
| Rennstrecken-Partnerschaft | Nürburgring |
Nürburgring
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 71.9 | DIN 51562-1 |
71.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 168 | DIN ISO 2909 |
168
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4250 | ASTM D5293 |
4250
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 12.200 | ASTM D4684 |
12.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 5.5 | ASTM D5800 |
5.5
%
ASTM D5800
|
| tbn | mgKOH/g | 10.3 | ASTM D2896 |
10.3
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-01, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00 |
BMW Longlife-01, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00
|
||
| Recommendations | VW 502 00, VW 505 00 |
VW 502 00, VW 505 00
|
For engine
RAVENOL VMO SAE 5W-40 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-04, GM dexos2®, MB-Approval 229.31, MB-Approval 229.51, VW 505.00, VW 505.01
Compliance with the requirements:
Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C 917-A, Porsche C40, VW 502.00
- Available packaging
- Product parameters
RAVENOL VMO SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
RAVENOL VMO SAE 5W-40 extends long life of DPF and TWC. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL VMO SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Because of a considerable fuel saving RAVENOL VMO SAE 5W-40 contributes to protect the environment by reducing the emissions.
Suitable for extended oil change intervals where recommended by manufacturer.
Application instructions
RAVENOL VMO SAE 5W-40 is an universal, synthetic low friction motor oil especially developed for Pumpe-Düse-diesel engines. Moreover, this lubricant is excellent suitable for gasoline and diesel engines in passenger cars and vans with and without turbo charger. Due to the specific composition is RAVENOL VMO SAE 5W-40 excellent suitable for use for several OEM requirements.
Characteristics
- Fuel economy in part and full power operation.
- MID SAPS = reduced Sulphated Ash, Phosphorous and Sulphur.
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine.
- Excellent cold starting characteristics also at low temperatures below -30°C.
- The function of the hydro tappet is ensure at all temperatures.
- A safe lubricant film at high operating temperatures.
- Low evaporative tendency, so lower oil consumption.
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned.
- Neutrality towards sealing materials.
- Extended oil change intervals to protect natural resources.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, GM dexos2®, MB-Approval 229.31, MB-Approval 229.51, VW 505.00, VW 505.01 |
BMW Longlife-04, GM dexos2®, MB-Approval 229.31, MB-Approval 229.51, VW 505.00, VW 505.01
|
||
| Recomendations | Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C 917-A, Porsche C40, VW 502.00 |
Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C 917-A, Porsche C40, VW 502.00
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 13.3 | DIN 51562-1 |
13.3
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 80 | DIN 51562-1 |
80
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 170 | DIN ISO 2909 |
170
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5900 | ASTM D5293 |
5900
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 24.100 | ASTM D4684 |
24.100
mPa*s
ASTM D4684
|
| Noack Volatility | % | 8.8 | ASTM D5800 |
8.8
%
ASTM D5800
|
| tbn | mgKOH/g | 9.8 | ASTM D2896 |
9.8
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C 917-A, GM dexos2®, MB 229.31, MB 229.51, Porsche C40, VW 502.00, VW 505.00, VW 505.01 |
BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C 917-A, GM dexos2®, MB 229.31, MB 229.51, Porsche C40, VW 502.00, VW 505.00, VW 505.01
|
||
| Recommendations | Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C917-A, Porsche C40, VW 502 00 |
Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C917-A, Porsche C40, VW 502 00
|
For engine
RAVENOL FEL SAE 5W-30 is a synthetic, Mid SAPS low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
Compliance with the requirements:
Fiat 9.55535-S1, IVECO 18-1811 CLASS SC1, PSA B71 2290
- Available packaging
- Product parameters
Volume:
5 L
Vendor code:
1111123-005
1111123-005-01-999
Code:
4014835723450
Volume:
208 L
Vendor code:
1111123-208
1111123-208-01-999
Code:
4014835723481
Volume:
1000 L
Vendor code:
1111123-700
Volume:
60 L
Vendor code:
1111123-060
1111123-060-01-999
RAVENOL FEL SAE 5W-30 is based on additives with low ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS >2,9 mPa*s. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL FEL SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in the cold running phase.
Because of a considerable fuel saving RAVENOL FEL SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL FEL SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application instructions
RAVENOL FEL SAE 5W-30 is an universal fuel economy, especially collected engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter. Due to the specific composition is RAVENOL FEL SAE 5W-30 excellent suitable for use for indicated OEM requirements.
Characteristics
- Fuel economy in part and full power operation
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
- Excellent cold starting characteristics also at low temperatures below -25°C
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | C2 |
C2
|
||
| JASO | DL-1 |
DL-1
|
||
| Recomendations | Fiat 9.55535-S1, IVECO 18-1811 CLASS SC1, PSA B71 2290 |
Fiat 9.55535-S1, IVECO 18-1811 CLASS SC1, PSA B71 2290
|
||
| Suitable for | Honda i-CTDi, Honda i-DTEC, Mazda CiTD, Mazda MZ-CD, Mazda MZR-CD, Subaru Boxer Diesel, Suzuki |
Honda i-CTDi, Honda i-DTEC, Mazda CiTD, Mazda MZ-CD, Mazda MZR-CD, Subaru Boxer Diesel, Suzuki
|
||
| Density at 20 °C | g/cm³ | 850 | EN ISO 12185 |
850
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 10.7 | DIN 51562-1 |
10.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 61.4 | DIN 51562-1 |
61.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 166 | DIN ISO 2909 |
166
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4765 | ASTM D5293 |
4765
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 16.100 | ASTM D4684 |
16.100
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9 | ASTM D5800 |
9
%
ASTM D5800
|
| tbn | mgKOH/g | 7.7 | ASTM D2896 |
7.7
mgKOH/g
ASTM D2896
|
| Approvals | Fiat 9.55535-S1, IVECO 18-1811 CLASS SC1, PSA B71 2290 |
Fiat 9.55535-S1, IVECO 18-1811 CLASS SC1, PSA B71 2290
|
||
| Recommendations | Fiat 9.55535-S1, Honda i-CTDi, Honda i-DTEC, IVECO 18-1811 CLASSE SC1, Mazda MZ-CD, Mazda 183418, Mazda 183419, Mazda CiTD, Mazda MZR-CD, PSA B71 2290, Subaru Boxer Diesel, Suzuki, Toyota 08880-83388, Toyota 08880-83389 |
Fiat 9.55535-S1, Honda i-CTDi, Honda i-DTEC, IVECO 18-1811 CLASSE SC1, Mazda MZ-CD, Mazda 183418, Mazda 183419, Mazda CiTD, Mazda MZR-CD, PSA B71 2290, Subaru Boxer Diesel, Suzuki, Toyota 08880-83388, Toyota 08880-83389
|
For engine
RAVENOL HCL SAE 5W-30 is a synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-01, MB-Approval 229.5, VW 502.00, VW 505.00
Compliance with the requirements:
BMW Longlife-01 FE, VW 501.01
- Available packaging
- Product parameters
RAVENOL HCL SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL HCL SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL HCL SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application instructions
RAVENOL HCL SAE 5W-30 is an universal fuel-efficient engine oil, a top-quality product for petrol and passenger car diesel engines with or without turbochargers in passenger cars and vans.
Characteristics
- Fuel economy in part and full power operation.
- Very stable and excellent viscosity behaviour.
- Excellent shear stability.
- Excellent cold start characteristics.
- A safe lubricant film at high operating temperatures.
- Excellent detergency and dispersing properties.
- High wear and corrosion protection, high oxidation stability.
- Protection against foaming.
- Excellent detergent- and dispersant characteristics.
- Longlife characteristics through high oxidation stability.
- Catalyst suitability.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | BMW Longlife-01, MB-Approval 229.5, VW 502.00, VW 505.00 |
BMW Longlife-01, MB-Approval 229.5, VW 502.00, VW 505.00
|
||
| Recomendations | BMW Longlife-01 FE, VW 501.01 |
BMW Longlife-01 FE, VW 501.01
|
||
| Density at 20 °C | g/cm³ | 847 | EN ISO 12185 |
847
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 72.3 | DIN 51562-1 |
72.3
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 168 | DIN ISO 2909 |
168
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5591 | ASTM D5293 |
5591
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 24.100 | ASTM D4684 |
24.100
mPa*s
ASTM D4684
|
| Noack Volatility | % | 8.6 | ASTM D5800 |
8.6
%
ASTM D5800
|
| tbn | mgKOH/g | 12.7 | ASTM D2896 |
12.7
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-01, BMW Longlife-01 FE, MB 229.5, VW 501.01, VW 502.00, VW 505.00 |
BMW Longlife-01, BMW Longlife-01 FE, MB 229.5, VW 501.01, VW 502.00, VW 505.00
|
||
| Recommendations | BMW Longlife-01 FE, VW 501 01 |
BMW Longlife-01 FE, VW 501 01
|
Engine oil
RAVENOL HCS SAE 5W-40 is synthetic high performance motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Formulated to minimise friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.
Manufacturer Approved:
MB-Approval 229.3, Renault RN 0700, Renault RN 0710, VW 502.00, VW 505.00
Compliance with the requirements:
BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, GM GM-LL-B-025, MB 226.5, PSA B71 2296, Porsche A40
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1112105-020
1112105-020-01-999
Code:
4014835723924
Volume:
1000 L
Vendor code:
1112105-700
1112105-700-01-999
Application instructions
RAVENOL HCS SAE 5W-40 is suitable for an energy saving all year use for all modern passenger car gasoline and diesel engines, including turbo versions and for direct injection motors and also recommended for all operation conditions.
Characteristics
- High protection against wear
- Fuel economy by low friction property
- Excellent detergent- and dispersant property
- Prevention of black sludge formation
- Improved cleaner engine
- Extended lifetime because of oxidation stability
- Excellent cold starting characteristics
- Excellent viscosity-temperature- characteristics
- Low evaporation tendency
- Catalyst cleaning
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | MB-Approval 229.3, Renault RN 0700, Renault RN 0710, VW 502.00, VW 505.00 |
MB-Approval 229.3, Renault RN 0700, Renault RN 0710, VW 502.00, VW 505.00
|
||
| Recomendations | BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, GM GM-LL-B-025, MB 226.5, PSA B71 2296, Porsche A40 |
BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, GM GM-LL-B-025, MB 226.5, PSA B71 2296, Porsche A40
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.4 | DIN 51562-1 |
14.4
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 87.5 | DIN 51562-1 |
87.5
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 171 | DIN ISO 2909 |
171
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5370 | ASTM D5293 |
5370
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 28.500 | ASTM D4684 |
28.500
mPa*s
ASTM D4684
|
| Noack Volatility | % | 8.4 | ASTM D5800 |
8.4
%
ASTM D5800
|
| tbn | mgKOH/g | 10.4 | ASTM D2896 |
10.4
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, GM GM-LL-B-025, MB 226.5, MB 229.3, PSA B71 2296, Porsche A40, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00 |
BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, GM GM-LL-B-025, MB 226.5, MB 229.3, PSA B71 2296, Porsche A40, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00
|
||
| Recommendations | BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, MB 226.5, Opel/GM-LL-B-025, PSA B71 2296, Porsche A40 |
BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, MB 226.5, Opel/GM-LL-B-025, PSA B71 2296, Porsche A40
|
For diesels
RAVENOL VSW SAE 0W-30 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-04, MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
Compliance with the requirements:
Chrysler MS-11106, Porsche C30, VW 504.00, VW 507.00
- Available packaging
- Product parameters
Volume:
60 L
Vendor code:
1111106-060
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
RAVENOL VSW SAE 0W-30 lengthens the service life of the diesel particulate filter by reducing the concentration of ash-forming particles in the exhaust gas. It reduces the emissions of gases which are harmful to the environment. It delivers a higher degree of security by providing lasting protection for engines.
With its new formulation, RAVENOL VSW SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL VSW SAE 0W-30 helps to protect the environment by reducing emissions.
RAVENOL VSW SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
RAVENOL VSW SAE 0W-30 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.
Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL VSW SAE 0W-30 can be used in all vehicles with or without LongLife Service and is therefore suitable for extended oil change intervals and vehicles with and without DPF filters. The operating instructions of the vehicle and engine manufcturers must be observed.
Characteristics
- Particularly low-friction characteristics and an outstanding range of benefits thanks to special additives.
- Outstanding engine protection even after a cold start and in tougher conditions.
- Guarantees rapid engine lubrication even at low temperatures of under -30°C and a sufficiently thick film of lubrication even at oil temperatures of >150°C during high-speed journeys.
- Guarantees the best possible protection against wear and tear and the highest level of engine cleanliness while also consuming less fuel (fuel economy characteristic).
- The hydraulic tappets are guaranteed to function at all temperatures due to adequate oil pressure.
- Does not have an impact on sealants.
- Safeguards the engine against sludge formation, coking, lacquering and corrosion even in unfavourable operating conditions.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52 |
BMW Longlife-04, MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
|
||
| Recomendations | Chrysler MS-11106, Porsche C30, VW 504.00, VW 507.00 |
Chrysler MS-11106, Porsche C30, VW 504.00, VW 507.00
|
||
| Density at 20 °C | g/cm³ | 846 | EN ISO 12185 |
846
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 60.8 | DIN 51562-1 |
60.8
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 197 | DIN ISO 2909 |
197
DIN ISO 2909
|
|
| CCS Viscosity at -35 °C | mPa*s | 5565 | ASTM D5293 |
5565
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 14.800 | ASTM D4684 |
14.800
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9 | ASTM D5800 |
9
%
ASTM D5800
|
| tbn | mgKOH/g | 7.6 | ASTM D2896 |
7.6
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-04, Chrysler MS-11106, MB 229.31, MB 229.51, MB 229.52, Porsche C30, VW 504.00, VW 507.00 |
BMW Longlife-04, Chrysler MS-11106, MB 229.31, MB 229.51, MB 229.52, Porsche C30, VW 504.00, VW 507.00
|
||
| Recommendations | Chrysler MS-11106, Porsche C30, VW 504 00, VW 507 00 |
Chrysler MS-11106, Porsche C30, VW 504 00, VW 507 00
|
RAVENOL SHL SAE 0W-40
For engine
RAVENOL SHL SAE 0W-40 is a HC (Hydrocrack) and PAO (Polyalphaolefin) based, synthetic motoroil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
MB-Approval 229.5, Porsche A40, Renault RN 0710, VW 502.00, VW 505.00
Compliance with the requirements:
BMW Longlife-01, Ford WSS-M2C 937-A, Renault RN 0700
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1111127-001
1111127-001-01-999
Code:
4014835868809
Volume:
4 L
Vendor code:
1111127-004
1111127-004-01-999
Code:
4014835868830
Volume:
5 L
Vendor code:
1111127-005
1111127-005-01-999
Code:
4014835868861
Volume:
10 L
Vendor code:
1111127-010
1111127-010-01-999
Code:
4014835868892
Volume:
20 L
Vendor code:
1111127-020
1111127-020-01-999
Code:
4014835868915
Volume:
20 L, ecobox
Vendor code:
1111127-B20
1111127-B20-01-888
Code:
4014835868977
Volume:
60 L
Vendor code:
1111127-060
Volume:
60 L, print
Vendor code:
1111127-D60
1111127-D60-01-888
Code:
4014835868991
Volume:
208 L
Vendor code:
1111127-208
Volume:
208 L, print
Vendor code:
1111127-D28
1111127-D28-01-888
Code:
4014835869011
RAVENOL SHL SAE 0W-40 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL SHL SAE 0W-40 helps to protect the environment by reducing emissions.
RAVENOL SHL SAE 0W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL SHL SAE 0W-40 guarantees operational safety in all driving conditions such as extreme stop-and-go traffic and high-speed highway driving.
RAVENOL SHL SAE 0W-40 is universal fuel-efficient synthetic engine oil suitable for petrol and diesel engines, with or without turbocharger, in cars and vans with the specified quality classifications.
Characteristics
- Excellent cold starting behavior
- Fuel savings for part and full load
- A very stable and excellent viscosity behavior
- Good shear stability
- A safe lubricant film at very high operating temperatures
- Excellent detergent and dispersant properties
- A broad protection against wear, corrosion and foaming
- Excellent aging stability
- Low evaporation loss
- Excellent engine cleanliness
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-40 |
0W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | MB-Approval 229.5, Porsche A40, Renault RN 0710, VW 502.00, VW 505.00 |
MB-Approval 229.5, Porsche A40, Renault RN 0710, VW 502.00, VW 505.00
|
||
| Recomendations | BMW Longlife-01, Ford WSS-M2C 937-A, Renault RN 0700 |
BMW Longlife-01, Ford WSS-M2C 937-A, Renault RN 0700
|
||
| Density at 20 °C | g/cm³ | 842 | EN ISO 12185 |
842
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 13.46 | DIN 51562-1 |
13.46
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 75 | DIN 51562-1 |
75
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 185 | DIN ISO 2909 |
185
DIN ISO 2909
|
|
| CCS Viscosity at -35 °C | mPa*s | 5950 | ASTM D5293 |
5950
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 28.600 | ASTM D4684 |
28.600
mPa*s
ASTM D4684
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 28.600 | ASTM D4684 |
28.600
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9.4 | ASTM D5800 |
9.4
%
ASTM D5800
|
| tbn | mgKOH/g | 10.46 | ASTM D2896 |
10.46
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-01, Ford WSS-M2C 937-A, MB 229.5, Porsche A40, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00 |
BMW Longlife-01, Ford WSS-M2C 937-A, MB 229.5, Porsche A40, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00
|
||
| Recommendations | BMW Longlife-01, Ford WSS-M2C937-A, Renault RN0700 |
BMW Longlife-01, Ford WSS-M2C937-A, Renault RN0700
|
For motorcycles
RAVENOL Motobike 4-T Mineral 20W-50 is an engine oil on mineral oil base with excellent additives which was especially produced for 4 stroke motorbikes. With RAVENOL Motobike 4-T Mineral 20W-50 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1173122-010
1173122-010-01-999
Code:
4014835888630
Volume:
20 L
Vendor code:
1173122-020
Volume:
60 L
Vendor code:
1173122-060
Volume:
208 L
Vendor code:
1173122-208
Volume:
1000 L
Vendor code:
1173122-700
RAVENOL Motobike 4-T Mineral 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.
Application instructions
RAVENOL Motobike 4-T Mineral 20W-50 is suitable as an engine oil for all motorbikes in case the specification SAE 20W-50 JASO MA/MA2 is requested.
Characteristics
- a very good shear stability
- very good cold start characteristics
- a high oxidation stability
- prevention of black sludge accumulation
- an excellent viscosity temperature behaviour
- suitable for catalysts
- convincing detergent and dispersant characteristics
- high safety reserves even under boundary lubrication conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 20W-50 |
20W-50
|
||
| Type | Mineral |
Mineral
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| JASO T904 DFI | 1.89 | JASO T904 |
1.89
JASO T904
|
|
| JASO T904 SFI | 1.65 | JASO T904 |
1.65
JASO T904
|
|
| JASO T904 STI | 1.86 | JASO T904 |
1.86
JASO T904
|
|
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 873.2 | EN ISO 12185 |
873.2
g/cm³
EN ISO 12185
|
| Color | Light brown | visual |
Light brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 18 | DIN 51562-1 |
18
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 161.8 | DIN 51562-1 |
161.8
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 123 | DIN ISO 2909 |
123
DIN ISO 2909
|
|
| CCS Viscosity at -15 °C | mPa*s | 8300 | ASTM D5293 |
8300
mPa*s
ASTM D5293
|
| Noack Volatility | % | 2.8 | ASTM D5800 |
2.8
%
ASTM D5800
|
| tbn | mgKOH/g | 7.6 | ASTM D2896 |
7.6
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
For engine
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is a synthetic Fuel Economy Longlife multigrade engine oil with an HTHS viscosity of between 2.9 cP and 3.2 cP which has been specially developed for the latest generation of turbodiesel commercial vehicle engines.
Manufacturer Approved:
DTFR 15C130, Mack EOS-5, Renault RLD-5, Volvo VDS-5
Compliance with the requirements:
Cummins CES 20087, DDC 93K223, MB 228.61
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1121105-B20
Volume:
60 L
Vendor code:
1121105-060
Volume:
60 L, print
Vendor code:
1121105-D60
Volume:
208 L, print
Vendor code:
1121105-D28
Volume:
1000 L
Vendor code:
1121105-700
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API specification FA-4 fulfils the requirements of the On-Highway Greenhouse Gas (GHG) standards for the reduction of greenhouse gas emissions from model year 2017 onwards.
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is suitable for diesel fuel with a sulphur content of up to 15ppm and can be used in the latest exhaust gas- optimized engines with exhaust gas treatment such as DPF diesel particulate filters and other systems.
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 contains shear-stable ingredients and improves engine performance, reliability and cleanliness. It delivers significant improvements to oxidation resistance, air supply, shear stability, wear and tear, deposits and a reduction in fuel consumption.
Application instructions
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is used by engine manufacturers as a year-round multigrade engine oil for engines with exhaust treatment systems with viscosity grade SAE 5W-30 in diesel commercial vehicle engines which are subject to heavy strain.
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with category FA-4 is neither interchangeable nor backward-compatible with API CK-4, CJ-4, CI-4 with CI-4 PLUS, CI-4 or CH-4 oils.
Note the manufacturer recommendations in order to establish whether RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API FA-4 is suitable for use.
RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API FA-4 is not recommended for use with fuels with more than 15 ppm of sulphur.
Characteristics
- A very stable and excellent viscosity behavior and high shear stability
- Fuel savings under all operating conditions
- Maintains the effectiveness of emission control systems over a very long period of time
- Loss of performance due to blocked diesel particle filters is prevented and a higher level of effici
- Low evaporation tendency, therefore low oil consumption
- Extended oil change intervals protect natural resources
- Very good cold start properties
- Low SAPS = Low Sulfated Ash, Phosphorus and Sulfur
- Can also be used in many commercial vehicles without diesel particle filters
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | FA-4, SN |
FA-4, SN
|
||
| ACEA | F01 |
F01
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | DTFR 15C130, Mack EOS-5, Renault RLD-5, Volvo VDS-5 |
DTFR 15C130, Mack EOS-5, Renault RLD-5, Volvo VDS-5
|
||
| Recomendations | Cummins CES 20087, DDC 93K223, MB 228.61 |
Cummins CES 20087, DDC 93K223, MB 228.61
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 9.9 | DIN 51562-1 |
9.9
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 60 | DIN 51562-1 |
60
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 151 | DIN ISO 2909 |
151
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5320 | ASTM D5293 |
5320
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 17.000 | ASTM D4684 |
17.000
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10.8 | ASTM D5800 |
10.8
%
ASTM D5800
|
| tbn | mgKOH/g | 10.4 | ASTM D2896 |
10.4
mgKOH/g
ASTM D2896
|
| Approvals | Cummins CES 20087, DDC 93K223, DTFR 15C130, MB 228.61, Mack EOS-5, Renault RLD-5, Volvo VDS-5 |
Cummins CES 20087, DDC 93K223, DTFR 15C130, MB 228.61, Mack EOS-5, Renault RLD-5, Volvo VDS-5
|
||
| Recommendations | Cummins CES 20087, Detroit Diesel DDC 93K223, MB 228.61 |
Cummins CES 20087, Detroit Diesel DDC 93K223, MB 228.61
|
For engine
RAVENOL High Fuel Economy HFE SAE 5W-16 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.
Compliance with the requirements:
Mitsubishi Dia Queen ECO Plus, Nissan Extra Save X Eco Hybrid Engine
- Available packaging
- Product parameters
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
RAVENOL High Fuel Economy HFE SAE 5W-16 was formulated with tri-nuclear molybdenum and OFM (Organic Friction Modifiers), in order to achieve minimal friction, wear and fuel consumption with excellent cold start characteristics.
With its new formulation, RAVENOL High Fuel Economy HFE SAE 5W-16 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL High Fuel Economy HFE SAE 5W-16 helps to protect the environment by reducing emissions.
Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL High Fuel Economy HFE SAE 5W-16 is suitable as a high performance, smooth-running engine oil for sophisticated engines. It is recommended for modern passenger car petrol engines, if the engine manufacturer recommends using a low viscosity oil with the viscosity category SAE 5W-16. It is also suitable for use in hybrid vehicles from various manufacturers.
Characteristics
- Fuel saving in partial and full load operation.
- Excellent wear protection and a high viscosity index ensure the long service life of the engine even under high speed driving conditions.
- Excellent cold start properties even at low temperatures of below -30°C.
- A reliable lubrication film even at high operating temperatures.
- Low volatility, resulting in low oil consumption.
- No oil-related deposits in combustion chambers, in the piston ring zone and on valves.
- Compatible with sealing materials.
- Extended oil change intervals protect natural resources.
- Ideal for hybrid vehicles.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-16 |
5W-16
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| Recomendations | Mitsubishi Dia Queen ECO Plus, Nissan Extra Save X Eco Hybrid Engine |
Mitsubishi Dia Queen ECO Plus, Nissan Extra Save X Eco Hybrid Engine
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 7.5 | DIN 51562-1 |
7.5
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 41.6 | DIN 51562-1 |
41.6
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 148 | DIN ISO 2909 |
148
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4461 | ASTM D5293 |
4461
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 8.200 | ASTM D4684 |
8.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 5.7 | ASTM D5800 |
5.7
%
ASTM D5800
|
| tbn | mgKOH/g | 8.2 | ASTM D2896 |
8.2
mgKOH/g
ASTM D2896
|
| Approvals | Mitsubishi Dia Queen ECO Plus, Nissan Extra Save X Eco Hybrid Engine |
Mitsubishi Dia Queen ECO Plus, Nissan Extra Save X Eco Hybrid Engine
|
||
| Recommendations | Honda 08215-99974, Honda 08216-99974, Honda 08232-P99S1LHE, Honda Ultra Green, Honda Ultra Next, Mitsubishi Dia Queen ECO Plus, Mitsubishi MZ102661, Mitsubishi MZ102662, Nissan KLANM-01A04 Extra Save X Eco Hybrid Engine, Toyota 08880-11005 |
Honda 08215-99974, Honda 08216-99974, Honda 08232-P99S1LHE, Honda Ultra Green, Honda Ultra Next, Mitsubishi Dia Queen ECO Plus, Mitsubishi MZ102661, Mitsubishi MZ102662, Nissan KLANM-01A04 Extra Save X Eco Hybrid Engine, Toyota 08880-11005
|
For engine
RAVENOL Motobike 4-T Ester SAE 5W-40 is a future-oriented engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. In order to guarantee the low viscosity of the SAE class 5W as well as a low evaporation loss a solid and high loadable engine oil was formulated for superior engines of motorbikes with wet couplings and oil lubricated couplings with RAVENOL Motobike 4-T Ester SAE 5W-40.
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1171102-020
Volume:
20 L, ecobox
Vendor code:
1171102-B20
Volume:
60 L
Vendor code:
1171102-060
Volume:
208 L
Vendor code:
1171102-208
The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.
RAVENOL Motobike 4-T Ester SAE 5W-40 fulfils the high tech demands of the latest powerful engine generation.
Application instructions
RAVENOL Motobike 4-T Ester SAE 5W-40 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 5W-40 is requested.
Characteristics
- a high corrosion protection
- fuel saving because of smooth running characteristics
- excellent detergent and dispersant characteristics
- prevention of black sludge formulation
- long endurance because of a high oxidation stability
- an excellent cold start behaviour
- a very good viscosity temperature behaviour
- a low evaporation tendency
- suitable for catalysts
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | Light brown | visual |
Light brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 13.7 | DIN 51562-1 |
13.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 83 | DIN 51562-1 |
83
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5937 | ASTM D5293 |
5937
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 28.300 | ASTM D4684 |
28.300
mPa*s
ASTM D4684
|
| Noack Volatility | % | 5.8 | ASTM D5800 |
5.8
%
ASTM D5800
|
| tbn | mgKOH/g | 7.6 | ASTM D2896 |
7.6
mgKOH/g
ASTM D2896
|
| Engine cycle | 4T |
4T
|
||
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
For motorcycles
RAVENOL Motobike 4-T Ester SAE 10W-50 is synthetic engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines.
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1171103-010
1171103-010-01-999
Code:
4014835888593
Volume:
20 L
Vendor code:
1171103-020
Volume:
20 L, ecobox
Vendor code:
1171103-B20
Volume:
208 L
Vendor code:
1171103-208
Volume:
1000 L
Vendor code:
1171103-700
With RAVENOL Motobike 4-T Ester SAE 10W-50 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.
RAVENOL Motobike 4-T Ester SAE 10W-50 fulfils the high tech demands of the latest powerful engine generation.
Application instructions
RAVENOL Motobike 4-T Ester SAE 10W-50 is suitable as a high performance low friction engine oil for all motorbikes in case the SAE 10W-50 is requested.
Characteristics
- a quick lubrication of the engine
- a low evaporation tendency, therefore a lower oil consumption
- safety against sludge accumulation, cokings and corrosion even under unfavourable operating conditions
- guarantee of the function of the hydro tappets at all temperatures
- no oil limited deposits in combustion chambers, at the piston ring and valves
- unchanged viscosity during the whole oil change interval, a high viscosity index
- neutral against sealing materials
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-50 |
10W-50
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 855 | EN ISO 12185 |
855
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.6 | DIN 51562-1 |
17.6
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 120.4 | DIN 51562-1 |
120.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 162 | DIN ISO 2909 |
162
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5914 | ASTM D5293 |
5914
mPa*s
ASTM D5293
|
| Noack Volatility | % | 5.2 | ASTM D5800 |
5.2
%
ASTM D5800
|
| tbn | mgKOH/g | 7.5 | ASTM D2896 |
7.5
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
RAVENOL Agrar Synto Premium SAE 15W-40
RAVENOL Agrar Synto Premium SAE 15W-40 is an all-season diesel engine oil suitable for engines with and without turbocharging in tractors, agricultural vehicles, machinery, and other vehicles in the fleet.
Manufacturer Approved:
DTFR 15C100, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DDC 93K218, DDC 93K222, Deutz DQC III-10 LA, MAN M 3275, MAN M 3575, MB 228.31, MTU Type 2.1
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1310202-010
Volume:
20 L
Vendor code:
1310202-020
Volume:
20 L, ecobox
Vendor code:
1310202-B20
Volume:
60 L
Vendor code:
1310202-060
Volume:
208 L
Vendor code:
1310202-208
Volume:
1000 L
Vendor code:
1310202-700
RAVENOL Agrar Synto Premium SAE 15W-40 is a diesel engine oil with high wear protection that is also suitable for vehicles with exhaust gas recirculation systems.
RAVENOL Agrar Synto Premium SAE 15W-40 is specially designed for extended oil change intervals (in accordance with the manufacturer's specifications).
Application instructions
RAVENOL Agrar Synto Premium SAE 15W-40 can be used all year round. Depending on the manufacturer's specifications, it can be used for the entire vehicle fleet of the agricultural business, which can simplify storage.
RAVENOL Agrar Synto Premium SAE 15W-40 offers superior performance in the areas of wear control, piston deposits, and oil thickening. It was designed for new exhaust emission guidelines and for vehicles with exhaust gas recirculation systems.
Characteristics
- High pressure absorption capacity and excellent wear protection
- Outstanding cold start performance, even at low temperatures
- Excellent temperature stability in continuous use
- Very good detergent and dispersant properties
- Excellent aging resistance
- Suitable for all types of agricultural vehicles
- Excellent viscosity-temperature behavior
- Good compatibility with seals
- High safety reserves, even under extreme lubrication conditions
- Ideal for difficult operating conditions in year-round use
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-40 |
15W-40
|
||
| Type | Mineral |
Mineral
|
||
| API | CK-4, SN |
CK-4, SN
|
||
| ACEA | E11, E7, E9 |
E11, E7, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | DTFR 15C100, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
DTFR 15C100, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DDC 93K218, DDC 93K222, Deutz DQC III-10 LA, MAN M 3275, MAN M 3575, MB 228.31, MTU Type 2.1 |
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DDC 93K218, DDC 93K222, Deutz DQC III-10 LA, MAN M 3275, MAN M 3575, MB 228.31, MTU Type 2.1
|
||
| Suitable for | IVECO |
IVECO
|
||
| Density at 20 °C | g/cm³ | 866 | EN ISO 12185 |
866
g/cm³
EN ISO 12185
|
| Color | reddish brown | visual |
reddish brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.6 | DIN 51562-1 |
15.6
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 116.1 | DIN 51562-1 |
116.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 142 | DIN ISO 2909 |
142
DIN ISO 2909
|
|
| CCS Viscosity at -20 °C | mPa*s | 5.370 | ASTM D5293 |
5.370
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 18.400 | ASTM D4684 |
18.400
mPa*s
ASTM D4684
|
| Noack Volatility | % | 7.8 | ASTM D5800 |
7.8
%
ASTM D5800
|
| tbn | mgKOH/g | 11 | ASTM D2896 |
11
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DDC 93K218, DDC 93K222, DTFR 15C100, Deutz DQC III-10 LA, MAN M 3275, MAN M 3575, MB 228.31, MTU Type 2.1, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DDC 93K218, DDC 93K222, DTFR 15C100, Deutz DQC III-10 LA, MAN M 3275, MAN M 3575, MB 228.31, MTU Type 2.1, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, Detroit Diesel DDC 93K218, Detroit Diesel DDC 93K222, Deutz DQC III-10 LA, IVECO, JASO DH-2, MAN M 3275, MAN M 3575, MB 228.31, MTU Typ 2.1 |
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, Detroit Diesel DDC 93K218, Detroit Diesel DDC 93K222, Deutz DQC III-10 LA, IVECO, JASO DH-2, MAN M 3275, MAN M 3575, MB 228.31, MTU Typ 2.1
|
RAVENOL HVE High Viscosity Ester Oil SAE 10W-50
For engine
RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 is particularly recommended for high mileage vehicles from approx. 100,000 km. It is equally suitable for both petrol and diesel engines with or without a turbocharger and direct fuel injection RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 is a newly developed synthetic motor oil with a unique formula, specially designed for high mileage vehicles.
Compliance with the requirements:
MB 229.1
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1115101-001
1115101-001-01-999
Code:
4014835802940
Volume:
5 L
Vendor code:
1115101-005
1115101-005-01-999
Code:
4014835802964
Volume:
10 L
Vendor code:
1115101-010
1115101-010-01-999
Code:
4014835888210
Volume:
20 L
Vendor code:
1115101-020
1115101-020-01-999
Code:
4014835843356
Volume:
20 L, ecobox
Vendor code:
1115101-B20
1115101-B20-01-888
Code:
4014835851931
Volume:
60 L
Vendor code:
1115101-060
Volume:
208 L
Vendor code:
1115101-208
Thanks to the additives in our RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 which offer exceptional cleaning and maintenance for your engine, critical engine components are restored and seals are given extra protection. This means that the service life of vehicles can be extended, particularly in older, higher mileage vehicles.
RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 has excellent lubricating film adhesion and high shear stability. Its engine-maintaining additives help to reduce oil consumption, offering protection against both sludge formation and wear and tear.
Application instructions
RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 is ideal for year-round use in high mileage petrol and diesel engines which have covered 100,000 km or more and offers the additional benefit of keeping oil consumption low.
RAVENOL HVE High Viscosity Ester Oil SAE 10W-50 extends the service life of the engines of older vehicles by protecting against sludge formation and wear and tear, meaning lower oil consumption. Your engine is guaranteed to be exceptionally clean!
Characteristics
- High protection against wear and tear which is important forhigh mileage vehicles and extended oil change intervals
- Fuel saving because of easy running characteristics
- Outstanding detergent and dispersant properties prevent sludge
- High oxidation stability for a long life
- Brilliant cold cranking behaviour
- Excellent viscosity-temperature behaviour
- Low vaporisation characteristics, therefore reduced oil consumption
- Suitable for catalytic converters
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-50 |
10W-50
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Recomendations | MB 229.1 |
MB 229.1
|
||
| Density at 20 °C | g/cm³ | 852 | EN ISO 12185 |
852
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.15 | DIN 51562-1 |
17.15
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 115 | DIN 51562-1 |
115
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 163 | DIN ISO 2909 |
163
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5050 | ASTM D5293 |
5050
mPa*s
ASTM D5293
|
| Approvals | MB 229.1 |
MB 229.1
|
||
| Recommendations | MB 229.1 |
MB 229.1
|
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1152211-010
Volume:
20 L
Vendor code:
1152211-020
Volume:
20 L, ecobox
Vendor code:
1152211-B20
Volume:
60 L
Vendor code:
1152211-060
Volume:
208 L
Vendor code:
1152211-208
Volume:
4 L
Vendor code:
1152211-004
1152211-004-01-999
Code:
4014835893610
Volume:
1 L
Vendor code:
1152211-001
1152211-001-01-999
Code:
4014835893580
RAVENOL WATERCRAFT 4T SAE 10W-40 is suitable for high-performance engines with and without turbocharging / supercharging. It provides comprehensive engine protection even under the highest loads in water sports / marine applications. The oil is specifically formulated with selected additives for optimum lubricity, performance and corrosion protection.
Application instructions
RAVENOL WATERCRAFT 4T SAE 10W-40 is suitable for jet skis such as: WaveRunner FX Cruiser HO 2015+, WaveRunner FZR SVHO 2015+, WaveRunner VX 110 Sport 2005-2007 and other water sports equipment (PWC) with similar engine systems.
RAVENOL WATERCRAFT 4T SAE 10W-40 is specially designed for the lubrication of four-stroke gasoline engines under high speeds and dynamic loads in the marine sector.
Characteristics
- developed for the special technical requirements of jet ski engines
- also suitable for PWC and water sports equipment with similar engine systems
- formulated for high loads
- optimum lubrication of all engine components
- great wear and corrosion protection
- colored in marine-blue
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Suitable for | Yamaha |
Yamaha
|
||
| Density at 20 °C | g/cm³ | 861 | EN ISO 12185 |
861
g/cm³
EN ISO 12185
|
| Color | Blue | visual |
Blue
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.1 | DIN 51562-1 |
15.1
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 103.7 | DIN 51562-1 |
103.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 153 | DIN ISO 2909 |
153
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6327 | ASTM D5293 |
6327
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 11.4 | ASTM D2896 |
11.4
mgKOH/g
ASTM D2896
|
| Recommendations | Yamaha |
Yamaha
|
||
| Phosphorus content | mg/kg | 8 | ASTM D5800 |
8
mg/kg
ASTM D5800
|
RAVENOL WATERCRAFT 4T SAE 5W-40
RAVENOL WATERCRAFT 4T SAE 5W-40 is a synthetic blue-colored engine oil for the demanding and intensive use in 4-stroke engines of jet skis and other water sports equipment (PWC-Personal Watercraft).
Compliance with the requirements:
Sea-Doo
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1152212-010
Volume:
20 L
Vendor code:
1152212-020
Volume:
20 L, ecobox
Vendor code:
1152212-B20
Volume:
60 L
Vendor code:
1152212-060
Volume:
208 L
Vendor code:
1152212-208
Volume:
1 L
Vendor code:
1152212-001
1152212-001-01-999
Code:
4014835893160
Volume:
4 L
Vendor code:
1152212-004
1152212-004-01-999
Code:
4014835893191
RAVENOL WATERCRAFT 4T SAE 5W-40 is suitable for high-performance engines with and without turbocharging / supercharging. Performance is ensured at all times, even at high engine speeds and under dynamic loads in the marine sector. The oil is specifically formulated with selected additives for optimum lubricity, performance and corrosion protection.
Application instructions
RAVENOL WATERCRAFT 4T SAE 10W-40 is suitable for jet skis and other water sports equipment (PWC). The formulation of the oil was specially designed for the lubrication of four-stroke gasoline engines under high speeds and dynamic loads in the marine sector.
RAVENOL WATERCRAFT 4T SAE 10W-40 is suitable for the following watercraft, as well as many others with similar engine systems:
Yamaha: GP models, Jetblaster models, FX Cruiser models, VX Cruiser models
Sea Doo BRP: GTI, GTR, GTX, FISH PRO, RXT, Explorer, Switch, Spark, Wake Pro
Kawasaki: JetSki STX series , ULTRA series, LX series, SX-R series
Honda: AquaTrax F series, R series
The manufacturer's instructions must always be followed.
Characteristics
- developed for the special technical requirements of jet ski engines
- also suitable for PWC and water sports equipment with similar engine systems
- formulated for high loads
- optimum lubrication of all engine components
- great wear and corrosion protection
- colored in marine-blue
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Recomendations | Sea-Doo |
Sea-Doo
|
||
| Suitable for | Honda, Kawasaki, Yamaha |
Honda, Kawasaki, Yamaha
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | Blue | visual |
Blue
visual
|
|
| Viscosity at 100 °C | mm²/s | 16.68 | DIN 51562-1 |
16.68
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 82.98 | DIN 51562-1 |
82.98
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5937 | ASTM D5293 |
5937
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 7.6 | ASTM D2896 |
7.6
mgKOH/g
ASTM D2896
|
| Approvals | Sea-Doo |
Sea-Doo
|
||
| Recommendations | Honda, Kawasaki, Sea-Doo, Yamaha |
Honda, Kawasaki, Sea-Doo, Yamaha
|
||
| Phosphorus content | mg/kg | 5,8 | ASTM D5800 |
5,8
mg/kg
ASTM D5800
|