Search by VIN / Frame, vehicle make, model, type, unit name, or by the part number of any oil:
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1151311-020
Volume:
60 L
Vendor code:
1151311-060
Volume:
208 L
Vendor code:
1151311-208
Volume:
1000 L
Vendor code:
1151311-700
Due to its special additives and a special formulation RAVENOL SNOWMOBILES 4-Takt Fullsynth. achieves an extremely high viscosity stability. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By significantly reducing fuel consumption, RAVENOL SNOWMOBILES 4-Takt Fullsynth. helps to protect the environment by reducing emissions.
Application instructions
RAVENOL SNOWMOBILES 4-Takt Fullsynth. is a fuel-efficient engine oil specifically developed for use in 4 -Stroke Snowmobile engines.
Characteristics
- Quick lubrication of the engine even at temperatures below -30 °C
- Low evaporation tendency, therefore a lower oil consumption
- Safety against accumulation of sludge, coking and corrosion even under unfavourable operating conditions.
- No oil limited deposits in combustion chambers, at the piston ring and valves
- Unchanged viscosity during the whole oil change interval, high viscosity index
- Neutral against sealing materials
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| Recomendations | Arctic |
Arctic
|
||
| Suitable for | Bombardier, Kawasaki, Polaris, Ski-Doo, Suzuki, Yamaha |
Bombardier, Kawasaki, Polaris, Ski-Doo, Suzuki, Yamaha
|
||
| Density at 20 °C | g/cm³ | 843 | EN ISO 12185 |
843
g/cm³
EN ISO 12185
|
| Color | Green | visual |
Green
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 60.9 | DIN 51562-1 |
60.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 198 | DIN ISO 2909 |
198
DIN ISO 2909
|
|
| CCS Viscosity at -35 °C | mPa*s | 5610 | ASTM D5293 |
5610
mPa*s
ASTM D5293
|
| Noack Volatility | % | 9.2 | ASTM D5800 |
9.2
%
ASTM D5800
|
| tbn | mgKOH/g | 12.5 | ASTM D2896 |
12.5
mgKOH/g
ASTM D2896
|
| Approvals | Arctic |
Arctic
|
||
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 16.300 | ASTM D4684 |
16.300
mPa*s
ASTM D4684
|
| Recommendations | Arctic Cat, Bombardier, Kawasaki, Polaris, Ski-Doo, Suzuki, Yamaha |
Arctic Cat, Bombardier, Kawasaki, Polaris, Ski-Doo, Suzuki, Yamaha
|
||
| Engine cycle | 4T |
4T
|
RAVENOL Motobike 4-T Mineral SAE 15W-40
For motorcycles
RAVENOL Motobike 4-T Mineral 15W-40 is an engine oil on mineral oil base with excellent additives which was especially produced for 4 stroke motorbikes. With RAVENOL Motobike 4-T Mineral 15W-40 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1173121-001
1173121-001-01-999
Code:
4014835731318
Volume:
4 L
Vendor code:
1173121-004
1173121-004-01-999
Code:
4014835731394
Volume:
20 L
Vendor code:
1173121-020
Volume:
20 L, ecobox
Vendor code:
1173121-B20
1173121-B20-01-888
Code:
4014835783928
Volume:
60 L
Vendor code:
1173121-060
RAVENOL Motobike 4-T Mineral 15W-40 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance.
Application instructions
RAVENOL Motobike 4-T Mineral 15W-40 is suitable as an engine oil for all motorbikes in case the specification SAE 15W-40 is requested.
Characteristics
- a very good shear stability
- very good cold start characteristics
- a high oxidation stability
- prevention of black sludge accumulation
- an excellent viscosity temperature behaviour
- suitable for catalysts
- convincing detergent and dispersant characteristics
- high safety reserves even under boundary lubrication conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-40 |
15W-40
|
||
| Type | Mineral |
Mineral
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 863.6 | EN ISO 12185 |
863.6
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.28 | DIN 51562-1 |
14.28
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 107.5 | DIN 51562-1 |
107.5
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 135 | DIN ISO 2909 |
135
DIN ISO 2909
|
|
| CCS Viscosity at -20 °C | mPa*s | 6124 | ASTM D5293 |
6124
mPa*s
ASTM D5293
|
| Noack Volatility | % | 6.8 | ASTM D5800 |
6.8
%
ASTM D5800
|
| tbn | mgKOH/g | 8 | ASTM D2896 |
8
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
For motorcycles
RAVENOL Motobike 4-T Ester SAE 10W-40 is a future-oriented engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. Because of its synthetic components and a balanced innovative additivation it is suitable for superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1172112-010
1172112-010-01-999
Code:
4014835888579
Volume:
20 L
Vendor code:
1172112-020
Volume:
60 L
Vendor code:
1172112-060
Volume:
208 L
Vendor code:
1172112-208
Volume:
208 L, print
Vendor code:
1172112-D28
Volume:
1000 L
Vendor code:
1172112-700
With RAVENOL Motobike 4-T Ester SAE 10W-40 a solid and high loadable engine oil was developed. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.
RAVENOL Motobike 4-T Ester SAE 10W-40 fulfils the high tech demands of the latest powerful engine generation.
Application instructions
RAVENOL Motobike 4-T Ester SAE 10W-40 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 10W-40 JASO MA/MA2 is requested.
Characteristics
- a quick lubrication of the engine
- a low evaporation tendency, therefore a lower oil consumption
- safety against sludge accumulation, cokings and corrosion even under unfavourable operating conditions
- guarantee of the function of the hydro tappets at all temperatures
- no oil limited deposits in combustion chambers, at the piston ring and valves
- unchanged viscosity during the whole oil change interval, a high viscosity index
- neutral against sealing materials
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| JASO T904 DFI | 1.98 | JASO T904 |
1.98
JASO T904
|
|
| JASO T904 SFI | 1.69 | JASO T904 |
1.69
JASO T904
|
|
| JASO T904 STI | 1.94 | JASO T904 |
1.94
JASO T904
|
|
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 850 | EN ISO 12185 |
850
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.16 | DIN 51562-1 |
14.16
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 94.73 | DIN 51562-1 |
94.73
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 154 | DIN ISO 2909 |
154
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5900 | ASTM D5293 |
5900
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -30 °C | mPa*s | 21.300 | ASTM D4684 |
21.300
mPa*s
ASTM D4684
|
| Noack Volatility | % | 3.6 | ASTM D5800 |
3.6
%
ASTM D5800
|
| tbn | mgKOH/g | 7.8 | ASTM D2896 |
7.8
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
RAVENOL Agrar Synto Premium SAE 5W-30
RAVENOL Agrar Synto Premium SAE 5W-30 is a synthetic, fuel-saving “Low SAPS” agricultural diesel engine oil based on the latest additive technology with selected base oils. It has been specially developed for diesel engines under the most severe operating conditions in all seasons. Excellent suitability for use in EURO 4, EURO 5 and EURO 6 engines in combination with low-sulfur low-sulfur diesel fuel.
Manufacturer Approved:
Deutz DQC IV-18 LA
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 15C110, DTFR 15C120, Ford WSS-M2C 213-A, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3691, MAN M 3775, MB 228.51, MB 228.52, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-5
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1310200-010
Volume:
20 L, ecobox
Vendor code:
1310200-B20
Volume:
60 L
Vendor code:
1310200-060
Volume:
208 L
Vendor code:
1310200-208
Volume:
1000 L
Vendor code:
1310200-700
Volume:
20 L
Vendor code:
1310200-020
1310200-020-01-999
Code:
4014835906389
RAVENOL Agrar Synto Premium SAE 5W-30 is suitable for use in engines with and without particle filters and catalytic converters and is designed for low SAPS technology (Low sulfur, phosphorus, and ash content). The SAE 5W-30 viscosity range ensures reliable cold starts at low outside temperatures and full lubricity at high operating temperatures. Minimizes friction and wear.
RAVENOL Agrar Synto Premium SAE 5W-30 is characterized by increased oxidation and shear stability as well as improved air release properties in order to meet and exceed the latest API CK-4 requirements.
Application instructions
RAVENOL Agrar Synto Premium SAE 5W-30 is a high-performance engine oil that can be used all year round and is designed for the new exhaust emission guidelines as well as for agricultural vehicles with exhaust gas recirculation systems.
RAVENOL Agrar Synto Premium SAE 5W-30 is universally compatible with all diesel engines with and without turbocharging, following the manufacturer's guidelines. Suitable for EURO 4, EURO 5, and EURO 6 engines.
Characteristics
- Very stable and excellent viscosity behavior and high shear stability
- Very good cold start properties
- Low SAPS = low sulfate ash, phosphorus, and sulfur
- Excellent high-temperature stability
- Excellent detergent and dispersant properties
- Cost-effectiveness due to low fuel consumption
- Maintains the effectiveness of exhaust gas purification systems over a very long service life
- Excellent cold start behavior, rapid engine oil circulation even at low temperatures
- Prevents power loss due to clogged diesel particulate filters
- Fuel savings under all operating conditions
- Can also be used in many commercial vehicles without diesel particulate filters
- Improves engine efficiency
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CK-4, SN |
CK-4, SN
|
||
| ACEA | E11, E6, E7, E8, E9 |
E11, E6, E7, E8, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | Deutz DQC IV-18 LA |
Deutz DQC IV-18 LA
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 15C110, DTFR 15C120, Ford WSS-M2C 213-A, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3691, MAN M 3775, MB 228.51, MB 228.52, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-5 |
Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 15C110, DTFR 15C120, Ford WSS-M2C 213-A, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3691, MAN M 3775, MB 228.51, MB 228.52, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-5
|
||
| Density at 20 °C | g/cm³ | 852.6 | EN ISO 12185 |
852.6
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 73.6 | DIN 51562-1 |
73.6
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 164 | DIN ISO 2909 |
164
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5994 | ASTM D5293 |
5994
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 23.200 | ASTM D4684 |
23.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9.2 | ASTM D5800 |
9.2
%
ASTM D5800
|
| tbn | mgKOH/g | 9.6 | ASTM D2896 |
9.6
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Ford WSS-M2C 213-A, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3691, MAN M 3775, MB 228.51, MB 228.52, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-5 |
Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Ford WSS-M2C 213-A, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3691, MAN M 3775, MB 228.51, MB 228.52, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-5
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DTFR 15C110, DTFR 15C120, Detroit Diesel DDC 93K222, Ford WSS-M2C213-A, JASO DH-2, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3775, MB 228.51, MB 228.52, MTU Typ 3.1, Mack EOS-4.5, Renault VI RLD-3, Scania LDF-4, VOLVO VDS-5 |
Caterpillar ECF-3, Cummins CES 20086, DAF PSQL 2.1E LD, DTFR 15C110, DTFR 15C120, Detroit Diesel DDC 93K222, Ford WSS-M2C213-A, JASO DH-2, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3677, MAN M 3775, MB 228.51, MB 228.52, MTU Typ 3.1, Mack EOS-4.5, Renault VI RLD-3, Scania LDF-4, VOLVO VDS-5
|
RAVENOL MARINE Performance SAE 15W-40
RAVENOL MARINE Performance SAE 15W-40 is an all-year SHPD engine oil for marine diesel engines with or without turbo charging.
Manufacturer Approved:
Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
Compliance with the requirements:
Cummins QSB 5.9, DDC Detroit Diesel, Scania LDF, VETUS DEUTZ
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1163101-001
Volume:
4 L
Vendor code:
1163101-004
Volume:
5 L
Vendor code:
1163101-005
Volume:
20 L, ecobox
Vendor code:
1163101-B20
Volume:
60 L
Vendor code:
1163101-060
Volume:
208 L
Vendor code:
1163101-208
Volume:
20 L
Vendor code:
1163101-020
1163101-020-01-999
RAVENOL MARINE Performance SAE 15W-40 is marine diesel engines motor oil with high wear protection.
RAVENOL MARINE Performance SAE 15W-40 is specially designed for extended oil change intervals (under consideration of the manufacturer instruction).
Characteristics
- high pressure absorption capacity, high oxidation stability
- outstanding temperature stability
- very good detergent and dispersing properties
- excellent aging resistance, high wear protection
- excellent viscosity-temperature behavior
- neutrality to seals
- high safety reserves even with boundary lubrication conditions
- best suitability for difficult operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-40 |
15W-40
|
||
| Type | Mineral |
Mineral
|
||
| API | CJ-4, CK-4, SN |
CJ-4, CK-4, SN
|
||
| ACEA | E11, E7, E9 |
E11, E7, E9
|
||
| Manufacturer Approved | Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recomendations | Cummins QSB 5.9, DDC Detroit Diesel, Scania LDF, VETUS DEUTZ |
Cummins QSB 5.9, DDC Detroit Diesel, Scania LDF, VETUS DEUTZ
|
||
| Suitable for | Caterpillar, IVECO, MAN, MTU, Mercruiser, NANNI Diesel, PERKINS, SKL, STEYR, SULZER, Yanmar |
Caterpillar, IVECO, MAN, MTU, Mercruiser, NANNI Diesel, PERKINS, SKL, STEYR, SULZER, Yanmar
|
||
| Density at 20 °C | g/cm³ | 866 | EN ISO 12185 |
866
g/cm³
EN ISO 12185
|
| Color | Blue | visual |
Blue
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.6 | DIN 51562-1 |
15.6
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 116.1 | DIN 51562-1 |
116.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 142 | DIN ISO 2909 |
142
DIN ISO 2909
|
|
| tbn | mgKOH/g | 11 | ASTM D2896 |
11
mgKOH/g
ASTM D2896
|
| Approvals | Cummins QSB 5.9, DDC Detroit Diesel, Mack EOS-4.5, Renault RLD-3, Scania LDF, VETUS DEUTZ, Volvo VDS-4.5 |
Cummins QSB 5.9, DDC Detroit Diesel, Mack EOS-4.5, Renault RLD-3, Scania LDF, VETUS DEUTZ, Volvo VDS-4.5
|
||
| Recommendations | Caterpillar, Cummins QSB 5.9, Detroit Diesel, IVECO, MAN, MTU, Mercruiser, NANNI Diesel, PERKINS, SKL, STEYR, SULZER, Scania LDF, VETUS DEUTZ, Yanmar |
Caterpillar, Cummins QSB 5.9, Detroit Diesel, IVECO, MAN, MTU, Mercruiser, NANNI Diesel, PERKINS, SKL, STEYR, SULZER, Scania LDF, VETUS DEUTZ, Yanmar
|
RAVENOL ATV-UTV 4T SAE 5W-40
RAVENOL ATV-UTV 4T SAE 5W-40 is especially developed for demanding use in quads and ATVs (off-road vehicles). It is used for maximum performance and optimum protection in 4-stroke quad engines. Special additives reliably protect the transmission against wear and ease the cranking process with the gear engaged as well as the shifting process itself.
API: SN
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1152161-010
Volume:
20 L
Vendor code:
1152161-020
Volume:
20 L, ecobox
Vendor code:
1152161-B20
Volume:
60 L
Vendor code:
1152161-060
Volume:
208 L
Vendor code:
1152161-208
Volume:
1 L
Vendor code:
1152161-001
1152161-001-01-999
Code:
4014835892880
Volume:
4 L
Vendor code:
1152161-004
1152161-004-01-999
Code:
4014835892910
RAVENOL ATV-UTV 4T SAE 5W-40 enables a low-wear cold start even at very low outside temperatures thanks to its high viscosity. Wear is also minimized in lower gears and with high engine loads.
RAVENOL ATV-UTV 4T SAE 5W-40 is blended with special additives which reliably protect the gearbox against wear even under high loads and counteract any combustion chamber deposits in the engine.
Application instructions
RAVENOL ATV-UTV 4T SAE 5W-40 is used in 4-stroke quad engines from leading manufacturers. It can also be used in vehicles with wet clutches and catalytic converters. It is suitable as an all-year-round oil for quads, but also for other ATV and Enduro vehicles.
RAVENOL ATV-UTV 4T SAE 5W-40 is designed for all air- and water-cooled 4-stroke engines in the ATV and Enduro range, in accordance to the vehicle manufacturer's operating instructions.
Besides many other vehicles suitable for:
Can-Am (BRP): Maverick (incl. R), Commander, Defender, DS, Renegade, Traxter, Outlander, etc.
Yamaha: Wolverine, Kodiak, Grizzly, Viking, etc.
Honda: FourTrax, Talon, Pioneer, etc.
Kawasaki: Brute Force, Mule, Teryx, KFX, etc.
Polaris: Ranger (gasoline), RZR, Sportsman, Pro XD, Predator, Crew, General, etc.
Suzuki: KingQuad, Quadsport, LTZ, etc.
CFMoto: CFORCE, UFORCE, ZFORCE, etc.
The manufacturer's instructions must be followed!
Characteristics
- low-wear cold start even at extremely low outside temperatures
- stable lubrication and good shear stability
- compatible with wet clutches and catalytic converters
- can be used all year round
- high corrosion- and wear protection
- low evaporation tendency, therefore low oil consumption
- tested and proven additives
- high safety reserves during peak loads
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Synthetic |
Synthetic
|
||
| Recomendations | CAN-AM, CFMOTO |
CAN-AM, CFMOTO
|
||
| Suitable for | Bombardier, Honda, Kawasaki, Polaris, Suzuki, Yamaha |
Bombardier, Honda, Kawasaki, Polaris, Suzuki, Yamaha
|
||
| Density at 20 °C | g/cm³ | 847 | EN ISO 12185 |
847
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 13.68 | DIN 51562-1 |
13.68
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 82.97 | DIN 51562-1 |
82.97
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| tbn | mgKOH/g | 7.2 | ASTM D2896 |
7.2
mgKOH/g
ASTM D2896
|
| Approvals | CAN-AM, CFMOTO |
CAN-AM, CFMOTO
|
||
| Phosphorus content | mg/kg | 5,8 | ASTM D5800 |
5,8
mg/kg
ASTM D5800
|
| API | SN |
SN
|
||
| CCS Viscosity at -30 °C | mPa*s | 5937 | ASTM D5293 |
5937
mPa*s
ASTM D5293
|
| JASO | MA2 |
MA2
|
||
| Recommendations | Bombardier, CAN-AM, CFMOTO, Honda, Kawasaki, Polaris, Suzuki, Yamaha |
Bombardier, CAN-AM, CFMOTO, Honda, Kawasaki, Polaris, Suzuki, Yamaha
|
RAVENOL ATV-UTV 4T SAE 10W-50
RAVENOL ATV-UTV 4T SAE 10W-50 is especially developed for demanding use in quads and ATVs (off-road vehicles). It is used for maximum performance and optimum protection in 4-stroke quad engines. Special additives reliably protect the transmission against wear and ease the cranking process with the gear engaged as well as the shifting process itself.
API: SN
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1152162-010
Volume:
20 L
Vendor code:
1152162-020
Volume:
20 L, ecobox
Vendor code:
1152162-B20
Volume:
60 L
Vendor code:
1152162-060
Volume:
208 L
Vendor code:
1152162-208
Volume:
1 L
Vendor code:
1152162-001
1152162-001-01-999
Code:
4014835892675
Volume:
4 L
Vendor code:
1152162-004
1152162-004-01-999
Code:
4014835892705
RAVENOL ATV-UTV 4T SAE 10W-50 enables a low-wear cold start even at very low outside temperatures thanks to its high viscosity. Wear is also minimized in lower gears and with high engine loads.
RAVENOL ATV-UTV 4T SAE 10W-50 is blended with special additives which reliably protect the gearbox against wear even under high loads and counteract any combustion chamber deposits in the engine.
Application instructions
RAVENOL ATV-UTV 4T SAE 10W-50 is used in 4-stroke quad engines from leading manufacturers. It can also be used in vehicles with wet clutches and catalytic converters. It is suitable as an all-year-round oil for quads, but also for other ATV and Enduro vehicles.
RAVENOL ATV-UTV 4T SAE 10W-50 is designed for all air- and water-cooled 4-stroke engines in the ATV and Enduro range, in accordance to the vehicle manufacturer's operating instructions.
Besides many other vehicles suitable for:
Can-Am (BRP): Maverick (incl. R), Commander, Defender, DS, Renegade, Traxter, Outlander, etc.
Yamaha: Wolverine, Kodiak, Grizzly, Viking, etc.
Honda: FourTrax, Talon, Pioneer, etc.
Kawasaki: Brute Force, Mule, Teryx, KFX, etc.
Polaris: Ranger (gasoline), RZR, Sportsman, Predator, Pro XD, Crew, General, etc.
Suzuki: KingQuad, Quadsport, LTZ, etc.
CFMoto: CFORCE, UFORCE, ZFORCE, etc.
The manufacturer's instructions must be followed!
Characteristics
- Low-wear cold start even at extremely low outside temperatures
- Stable lubrication and good shear stability
- Compatible with wet clutches and catalytic converters
- Can be used all year round
- High corrosion- and wear protection
- Low evaporation tendency, therefore low oil consumption
- Tested and proven additives
- High safety reserves during peak loads
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Synthetic |
Synthetic
|
||
| Recomendations | CAN-AM, CFMOTO |
CAN-AM, CFMOTO
|
||
| Suitable for | Bombardier, Honda, Kawasaki, Polaris, Suzuki, Yamaha |
Bombardier, Honda, Kawasaki, Polaris, Suzuki, Yamaha
|
||
| Density at 20 °C | g/cm³ | 854 | EN ISO 12185 |
854
g/cm³
EN ISO 12185
|
| Color | Light brown | visual |
Light brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.6 | DIN 51562-1 |
17.6
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 120.4 | DIN 51562-1 |
120.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 162 | DIN ISO 2909 |
162
DIN ISO 2909
|
|
| tbn | mgKOH/g | 7.6 | ASTM D2896 |
7.6
mgKOH/g
ASTM D2896
|
| Approvals | CAN-AM, CFMOTO |
CAN-AM, CFMOTO
|
||
| Phosphorus content | mg/kg | 5,2 | ASTM D5800 |
5,2
mg/kg
ASTM D5800
|
| API | SN |
SN
|
||
| CCS Viscosity at -30 °C | mPa*s | 5914 | ASTM D5293 |
5914
mPa*s
ASTM D5293
|
| JASO | MA2 |
MA2
|
||
| Recommendations | Bombardier, CAN-AM, CFMOTO, Honda, Kawasaki, Polaris, Suzuki, Yamaha |
Bombardier, CAN-AM, CFMOTO, Honda, Kawasaki, Polaris, Suzuki, Yamaha
|
RAVENOL Snowmobiles SAE 5W-50
RAVENOL Snowmobiles SAE 5W-50 is a PAO (Polyalphaolefin) based, fully synthetic engine oil, specially developed for the demanding use in modern 4-stroke snowmobile engines. Suitable for turbo-charged and naturally aspirated engines.
Compliance with the requirements:
Alpina
API: SN
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1152311-010
Volume:
20 L
Vendor code:
1152311-020
Volume:
4 L
Vendor code:
1152311-004
Volume:
1 L
Vendor code:
1152311-001
1152311-001-01-999
Code:
4014835893801
Volume:
20 L, ecobox
Vendor code:
1152311-B20
Volume:
60 L
Vendor code:
1152311-060
Volume:
208 L
Vendor code:
1152311-208
Volume:
4 L
Vendor code:
1151313-004
1152311-004-01-999
Code:
4014835893832
RAVENOL Snowmobiles SAE 5W-50 is based on high-quality base oils and an advanced additive package that is tailored to the special thermal and mechanical loads in winter operation.
RAVENOL Snowmobiles SAE 5W-50 guarantees maximum lubrication performance, even at lowest temperatures and high engine loads. The oil helps to protect the environment by significantly saving fuel and reducing emissions.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
Application instructions
RAVENOL Snowmobiles SAE 5W-50 is used in 4-stroke snowmobile engines from leading manufacturers. It can also be used in vehicles with wet clutches and catalytic converters.
RAVENOL Snowmobiles SAE 5W-50 can be used in the following snowmobiles:
Polaris: all models using 4-stroke engines
Alpina: Sherpa 1.4L, Sherpa 1.6L, Superclass 1.2L (all 4-stroke engines)
Also suitable for many other snowmobiles with similar engine systems.
Only use in accordance with the vehicle manufacturer's operating instructions!
Characteristics
- low-wear cold start even at extremely low outside temperatures
- developed for seasonal use and long service life
- stable lubrication and good shear stability
- ideal for use in extremely cold climate zones
- compatible with wet clutches and catalytic converters
- high corrosion- and wear protection
- low evaporation tendency, therefore low oil consumption
- tested and proven additives
- high safety reserves during peak loads
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Recomendations | Alpina |
Alpina
|
||
| Suitable for | Polaris |
Polaris
|
||
| Density at 20 °C | g/cm³ | 842.3 | EN ISO 12185 |
842.3
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.88 | DIN 51562-1 |
17.88
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 109.2 | DIN 51562-1 |
109.2
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 182 | DIN ISO 2909 |
182
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 3640 | ASTM D5293 |
3640
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 7.83 | ASTM D2896 |
7.83
mgKOH/g
ASTM D2896
|
| Approvals | Alpina |
Alpina
|
||
| Phosphorus content | mg/kg | 6,6 | ASTM D5800 |
6,6
mg/kg
ASTM D5800
|
| Recommendations | Alpina, Polaris |
Alpina, Polaris
|
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1143102-B20
Volume:
60 L
Vendor code:
1143102-060
Volume:
208 L
Vendor code:
1143102-208
Volume:
1000 L
Vendor code:
1143102-700
Volume:
1 L
Vendor code:
1143102-001
Volume:
4 L
Vendor code:
1143102-004
Volume:
5 L
Vendor code:
1143102-005
Volume:
10 L
Vendor code:
1143102-010
Volume:
20 L
Vendor code:
1143102-020
RAVENOL Racing Eco Rallye RER SAE 5W-50 is thus a USDA certified bioproduct. It was developed to offer both environmental and performance benefits over conventional engine oils.
RAVENOL Racing Eco Rallye RER SAE 5W-50 is also suitable for an extremely sporty driving style. It uses the positive properties of molybdenum, which smoothes the surface structure in the engine, thus reducing friction and wear and improving mechanical efficiency.
RAVENOL Racing Eco Rallye RER SAE 5W-50 achieves a secure lubrication layer thanks to its unique formulation even at very high operating temperatures, protection from corrosion (oxidation) and foaming.
Application instructions
RAVENOL Racing Eco Rallye RER SAE 5W-50 is ideally suited for gasoline engines for car racing, even when subject to the highest levels of strain.
RAVENOL Racing Eco Rallye RER SAE 5W-50 achieves a reliable lubricating layer even at very high operating temperatures. It is therefore a real alternative to conventional engine oils, as it reduces the environmental impact compared to conventional engine oils.
Characteristics
- On the basis of renewable resources
- USDA BioPreferred - biodegradable
- Ultra-modern full synthetic engine oil for car race with special additives
- Safe lubricating layer, even at very high operating temperatures
- Increased HTHS value
- Very stable and excellent viscosity behaviour
- Very low evaporation tendency
- Very good cold start characteristics
- Catalyst suitability
- Protection against wear, corrosion and foam formation
- Prevention of black sludge and deposits
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-50 |
5W-50
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Manufacturer Approved | USDA Biopreferred® |
USDA Biopreferred®
|
||
| Density at 20 °C | g/cm³ | 845 | EN ISO 12185 |
845
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 17.5 | DIN 51562-1 |
17.5
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 102.3 | DIN 51562-1 |
102.3
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 189 | DIN ISO 2909 |
189
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 3673 | ASTM D5293 |
3673
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 19.700 | ASTM D4684 |
19.700
mPa*s
ASTM D4684
|
| Noack Volatility | % | 8.4 | ASTM D5800 |
8.4
%
ASTM D5800
|
| tbn | mgKOH/g | 12.6 | ASTM D2896 |
12.6
mgKOH/g
ASTM D2896
|
| Approvals | USDA Biopreferred® |
USDA Biopreferred®
|
RAVENOL HSW SAE 0W-30
RAVENOL HSW SAE 0W-30 is a synthetic based low friction motor oil with a PAO proportion > 30% andproven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
BMW Longlife-04, MB-Approval 229.51, MB-Approval 229.52, VW 504.00, VW 507.00
Compliance with the requirements:
Porsche C30
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1112118-001
1112118-001-01-999
Code:
4014835889545
Volume:
4 L
Vendor code:
1112118-004
1112118-004-01-999
Code:
4014835889576
Volume:
5 L
Vendor code:
1112118-005
1112118-005-01-999
Code:
4014835889606
Volume:
10 L
Vendor code:
1112118-010
1112118-010-01-999
Code:
4014835889637
Volume:
20 L
Vendor code:
1112118-020
1112118-020-01-999
Code:
4014835889651
Volume:
20 L, ecobox
Vendor code:
1112118-B20
1112118-B20-01-888
Code:
4014835889729
Volume:
60 L
Vendor code:
1112118-060
1112118-060-01-999
Code:
4014835889675
Volume:
208 L
Vendor code:
1112118-208
1112118-208-01-999
Code:
4014835889699
Volume:
1000 L
Vendor code:
1112118-700
RAVENOL HSW SAE 0W-30 lengthens the service life of the diesel particulate filter by reducing the concentration of ash-forming particles in the exhaust gas. It reduces the emissions of gases which are harmful to the environment. It delivers a higher degree of security by providing lasting protection for engines.
With its formulation, RAVENOL HSW SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.
By reducing fuel consumption, RAVENOL HSW SAE 0W-30 helps to protect the environment by reducing emissions. It minimizes friction, wear and fuel consumption.
RAVENOL HSW SAE 0W-30 guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.
Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL HSW SAE 0W-30 can be used in all vehicles with and without LongLife Service and is therefore suitable for extended oil change intervals and vehicles with and without DPF filters. The operating instructions of the vehicle and engine manufacturers must be observed.
Characteristics
- Particularly low-friction characteristics and an outstanding range of benefits thanks to special additives.
- Outstanding engine protection even after a cold start and in tougher conditions.
- Guarantees rapid engine lubrication even at low temperatures of under -30°C and a sufficiently thick film of lubrication even at oil temperatures of >150°C during high-speed journeys.
- Good protection against wear and tear and the high level of engine cleanliness while also consuming less fuel (fuel economy characteristic).
- The hydraulic tappets are guaranteed to function at all temperatures due to adequate oil pressure.
- Does not have an impact on sealants.
- Safeguards the engine against sludge formation, coking, lacquering and corrosion even in unfavourable operating conditions.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, MB-Approval 229.51, MB-Approval 229.52, VW 504.00, VW 507.00 |
BMW Longlife-04, MB-Approval 229.51, MB-Approval 229.52, VW 504.00, VW 507.00
|
||
| Recomendations | Porsche C30 |
Porsche C30
|
||
| Density at 20 °C | g/cm³ | 836 | EN ISO 12185 |
836
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 62.4 | DIN 51562-1 |
62.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 197 | DIN ISO 2909 |
197
DIN ISO 2909
|
|
| CCS Viscosity at -35 °C | mPa*s | 5890 | ASTM D5293 |
5890
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 19.200 | ASTM D4684 |
19.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10 | ASTM D5800 |
10
%
ASTM D5800
|
| tbn | mgKOH/g | 8.3 | ASTM D2896 |
8.3
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-04, MB 229.51, MB 229.52, Porsche C30, VW 504.00, VW 507.00 |
BMW Longlife-04, MB 229.51, MB 229.52, Porsche C30, VW 504.00, VW 507.00
|
||
| Recommendations | Porsche C30 |
Porsche C30
|
For motorcycles
RAVENOL Motobike 4-T Ester 15W-50 is a future-oriented engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. Because of its synthetic components and a balanced innovative additivation it is suitable for superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1172113-010
1172113-010-01-999
Code:
4014835888616
Volume:
20 L
Vendor code:
1172113-020
Volume:
60 L
Vendor code:
1172113-060
Volume:
60 L, print
Vendor code:
1172113-D60
Volume:
208 L
Vendor code:
1172113-208
Volume:
1000 L
Vendor code:
1172113-700
With RAVENOL Motobike 4-T Ester 15W-50a solid and high loadable engine oil was developed. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.
RAVENOL Motobike 4-T Ester 15W-50 fulfils the high tech demands of the latest powerful engine generation.
Application instructions
RAVENOL Motobike 4-T Ester 15W50 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 15W-50 JASO MA/MA2 is requested.
Characteristics
- a quick lubrication of the engine
- a low evaporation tendency, therefore a lower oil consumption
- safety against sludge accumulation, cokings and corrosion even under unfavourable operatingconditions
- guarantee of the function of the hydro tappets at all temperatures
- no oil limited deposits in combustion chambers, at the piston ring and valves
- unchanged viscosity during the whole oil change interval, a high viscosity index
- neutral against sealing materials
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-50 |
15W-50
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 860 | EN ISO 12185 |
860
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 18.7 | DIN 51562-1 |
18.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 144.7 | DIN 51562-1 |
144.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 147 | DIN ISO 2909 |
147
DIN ISO 2909
|
|
| CCS Viscosity at -20 °C | mPa*s | 6300 | ASTM D5293 |
6300
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 7.9 | ASTM D2896 |
7.9
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
Engine oil
RAVENOL SMP SAE 5W-30 is a Mid SAPS low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.
Manufacturer Approved:
BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00
Compliance with the requirements:
Chrysler MS-11106, Fiat 9.55535-S1, MB 226.52, MB 229.31, Renault RN17, Stellantis FPW9.55535/03, VW G 052 195
- Available packaging
- Product parameters
Volume:
208 L, print
Vendor code:
1111126-D28
1111126-D28-01-888
Volume:
1000 L
Vendor code:
1111126-700
1111126-700-01-999
RAVENOL SMP SAE 5W-30 is based on synthetic base oils and contains additives with reduced ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).
RAVENOL SMP SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures an optimal lubrication safety in the cold running phase.
Because of a considerable fuel saving RAVENOL SMP SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL SMP SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application instructions
RAVENOL SMP SAE 5W-30 is universal fuel economy, especially formulated engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter.
Due to the specific composition is RAVENOL SMP SAE 5W-30 excellent suitable for use for several of the latest OEM requirements.
Characteristics
- Fuel economy in part and full power operation
- MID SAPS = reduced Sulphated ash, Phosphor and Sulfur
- Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine
- Excellent cold starting characteristics also at low temperatures
- A safe lubricant film at high operating temperatures
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valvesbecause of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN, SP |
SN, SP
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00 |
BMW Longlife-04, MB-Approval 229.51, Porsche C30, VW 504.00, VW 507.00
|
||
| Recomendations | Chrysler MS-11106, Fiat 9.55535-S1, MB 226.52, MB 229.31, Renault RN17, Stellantis FPW9.55535/03, VW G 052 195 |
Chrysler MS-11106, Fiat 9.55535-S1, MB 226.52, MB 229.31, Renault RN17, Stellantis FPW9.55535/03, VW G 052 195
|
||
| Density at 20 °C | g/cm³ | 846 | EN ISO 12185 |
846
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.95 | DIN 51562-1 |
11.95
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 70.4 | DIN 51562-1 |
70.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 167 | DIN ISO 2909 |
167
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4770 | ASTM D5293 |
4770
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 17.600 | ASTM D4684 |
17.600
mPa*s
ASTM D4684
|
| Noack Volatility | % | 9.8 | ASTM D5800 |
9.8
%
ASTM D5800
|
| tbn | mgKOH/g | 8.8 | ASTM D2896 |
8.8
mgKOH/g
ASTM D2896
|
| Approvals | BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-S1, MB 226.52, MB 229.31, MB 229.51, Porsche C30, Renault RN17, Stellantis FPW9.55535/03, VW 504.00, VW 507.00, VW G 052 195 |
BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-S1, MB 226.52, MB 229.31, MB 229.51, Porsche C30, Renault RN17, Stellantis FPW9.55535/03, VW 504.00, VW 507.00, VW G 052 195
|
||
| Recommendations | BMW 83210398507, BMW/Mini 83 21 0 398 508, Chrysler MS-11106, Fiat 9.55535-S1, MB (A 000 989 89 01 10), MB 226.52, MB 229.31, Renault RN17, Stellantis FPW9.55535/03, VW/Audi G 052 195 M2, VW/Audi G 052 195 M4, VW/Audi G 052 195 M6 |
BMW 83210398507, BMW/Mini 83 21 0 398 508, Chrysler MS-11106, Fiat 9.55535-S1, MB (A 000 989 89 01 10), MB 226.52, MB 229.31, Renault RN17, Stellantis FPW9.55535/03, VW/Audi G 052 195 M2, VW/Audi G 052 195 M4, VW/Audi G 052 195 M6
|
RAVENOL Snowmobiles SAE 0W-40
RAVENOL Snowmobiles SAE 0W-40 is a PAO (Polyalphaolefin) based, fully synthetic engine oil, specially developed for the demanding use in modern 4-stroke snowmobile engines. Suitable for turbo-charged and naturally aspirated engines.
- Available packaging
- Product parameters
Volume:
10 L
Vendor code:
1151312-010
Volume:
20 L
Vendor code:
1151312-020
Volume:
20 L, ecobox
Vendor code:
1151312-B20
Volume:
60 L
Vendor code:
1151312-060
Volume:
208 L
Vendor code:
1151312-208
Volume:
1 L
Vendor code:
1151312-001
1151312-001-01-999
Code:
4014835894044
Volume:
4 L
Vendor code:
1151312-004
1151312-004-01-999
Code:
4014835894075
RAVENOL Snowmobiles SAE 0W-40 is based on high-quality base oils and an advanced additive package that is tailored to the special thermal and mechanical loads in winter operation.
RAVENOL Snowmobiles SAE 0W-40 guarantees maximum lubrication performance, even at lowest temperatures and high engine loads. The oil helps to protect the environment by significantly saving fuel and reducing emissions.
Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.
Application instructions
RAVENOL Snowmobiles SAE 0W-40 is used in 4-stroke snowmobile engines from leading manufacturers. It can also be used in vehicles with wet clutches and catalytic converters.
RAVENOL Snowmobiles SAE 0W-40 can be used in the following snowmobiles:
Arctic Cat: ZR models, Bearcat models, Pantera models, etc. (4-stroke)
Ski-Doo: Expedition models, Grand Touring models, GSX models, etc. (4-stroke)
Yamaha: Sidewinder models, etc. (4-stroke)
Lynx: Adventure models with 4-stroke engines
Also suitable for many other snowmobiles with similar engine systems.
Only use in accordance with the vehicle manufacturer's operating instructions!
Characteristics
- low-wear cold start even at extremely low outside temperatures
- developed for seasonal use and long service life
- stable lubrication and good shear stability
- ideal for use in extremely cold climate zones
- based on high-quality PAO (Polyalphaolefin)
- compatible with wet clutches and catalytic converters
- high corrosion- and wear protection
- low evaporation tendency, therefore low oil consumption
- tested and proven additives
- high safety reserves during peak loads
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-40 |
0W-40
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Recomendations | Arctic , Lynx |
Arctic , Lynx
|
||
| Suitable for | Ski-Doo, Yamaha |
Ski-Doo, Yamaha
|
||
| Density at 20 °C | g/cm³ | 838.4 | EN ISO 12185 |
838.4
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.01 | DIN 51562-1 |
15.01
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 86.14 | DIN 51562-1 |
86.14
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 184 | DIN ISO 2909 |
184
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4581 | ASTM D5293 |
4581
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 10.54 | ASTM D2896 |
10.54
mgKOH/g
ASTM D2896
|
| Approvals | Arctic , Lynx |
Arctic , Lynx
|
||
| Phosphorus content | mg/kg | 8,1 | ASTM D5800 |
8,1
mg/kg
ASTM D5800
|
| Recommendations | Arctic Cat, Lynx, Ski-Doo, Yamaha |
Arctic Cat, Lynx, Ski-Doo, Yamaha
|
RAVENOL HVP High Viscosity Perform. Oil SAE 15W-50
For engine
RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 is particularly recommended for vehicles with high mileage, petrol and diesel engines, with and without turbocharge and direct injection.
Compliance with the requirements:
MB 229.1
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1116104-001
1116104-001-01-999
Code:
4014835803008
Volume:
5 L
Vendor code:
1116104-005
1116104-005-01-999
Code:
4014835803022
Volume:
20 L
Vendor code:
1116104-020
Volume:
20 L, ecobox
Vendor code:
1116104-B20
1116104-B20-01-888
Code:
4014835863132
Volume:
60 L
Vendor code:
1116104-060
1116104-060-01-999
Code:
4014835843875
Volume:
208 L
Vendor code:
1116104-208
Volume:
208 L, print
Vendor code:
1116104-D28
The semi-synthetic motor oil RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 is developed with a unique formula specifically for high mileage vehicles of approx. 100,000 km and more.
The extremely conditioning and cleaning additives in RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 revitalize critical engine parts and particularly protect gaskets. This can extend the life, particularly in older vehicles with high mileage.
RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 features outstanding lubrication and excellent shear stability, and the added conditioners simultaneously reduce oil consumption and protect from sludge and wear.
Application instructions
RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 is perfectly suited for year-round use in high mileage petrol and diesel engines with 100,000 km and more, and promotes low oil consumption. A very clean engine is guaranteed.
RAVENOL HVP High Viscosity Performance Oil SAE 15W-50 extends the life of the engine in older vehicles by reducing oil consumption and protecting from sludge and wear. A very clean engine is guaranteed.
Characteristics
- High wear protection
- Outstanding detergent and dispersant properties prevent sludge
- Low vaporisation characteristics, therefore reduced oil consumption
- High oxidation stability for a long life
- Brilliant cold cranking behaviour through special additives
- Excellent viscosity-temperature behaviour
- Suitable for catalytic converters
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-50 |
15W-50
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Recomendations | MB 229.1 |
MB 229.1
|
||
| Density at 20 °C | g/cm³ | 866 | EN ISO 12185 |
866
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 18.7 | DIN 51562-1 |
18.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 139.1 | DIN 51562-1 |
139.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 152 | DIN ISO 2909 |
152
DIN ISO 2909
|
|
| CCS Viscosity at -20 °C | mPa*s | 5710 | ASTM D5293 |
5710
mPa*s
ASTM D5293
|
| Approvals | MB 229.1 |
MB 229.1
|
||
| Recommendations | MB 229.1 |
MB 229.1
|
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60
For engine
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 is particularly recommended for high mileage vehicles from approx. 100,000 km. It is equally suitable for both petrol and diesel engines with or without a turbocharger and direct fuel injection.
Compliance with the requirements:
MB 229.1
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1115102-001
1115102-001-01-999
Code:
4014835802971
Volume:
5 L
Vendor code:
1115102-005
1115102-005-01-999
Code:
4014835802995
Volume:
10 L
Vendor code:
1115102-010
1115102-010-01-999
Code:
4014835888234
Volume:
20 L
Vendor code:
1115102-020
Volume:
20 L, ecobox
Vendor code:
1115102-B20
1115102-B20-01-888
Code:
4014835850897
Volume:
60 L
Vendor code:
1115102-060
1115102-060-01-999
Code:
4014835843479
Volume:
208 L
Vendor code:
1115102-208
Volume:
208 L, print
Vendor code:
1115102-D28
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 is a newly developed synthetic motor oil with a unique formula, specially designed for high mileage vehicles.
Thanks to the additives in our RAVENOL HVS High Viscosity Synto Oil SAE 10W-60, which offer exceptional cleaning and maintenance for your engine, critical engine components are restored and seals are given extra protection. This means that the service life of vehicles can be extended, particularly in older, higher mileage vehicles.
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 has excellent lubricating film adhesion and high shear stability. Its engine-maintaining additives help to reduce oil consumption, offering protection against both sludge formation and wear and tear.
Application instructions
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 is ideal for year-round use in high mileage petrol and diesel engines which have covered 100,000 km or more and offers the additional benefit of keeping oil consumption low.
RAVENOL HVS High Viscosity Synto Oil SAE 10W-60 extends the service life of the engines of older vehicles by protecting against sludge formation and wear and tear, meaning lower oil consumption. Your engine is guaranteed to be exceptionally clean!
Characteristics
- High wear protection
- Fuel saving because of easy running characteristics
- Outstanding detergent and dispersant properties prevent sludge
- High oxidation stability for a long life
- Low vaporisation characteristics, therefore reduced oil consumption
- Brilliant cold cranking behaviour
- Excellent viscosity-temperature behaviour
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-60 |
10W-60
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CF, SN |
CF, SN
|
||
| ACEA | A3, B4 |
A3, B4
|
||
| Recomendations | MB 229.1 |
MB 229.1
|
||
| Density at 20 °C | g/cm³ | 853 | EN ISO 12185 |
853
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 22.1 | DIN 51562-1 |
22.1
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 155.6 | DIN 51562-1 |
155.6
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5790 | ASTM D5293 |
5790
mPa*s
ASTM D5293
|
| Approvals | MB 229.1 |
MB 229.1
|
||
| Recommendations | MB 229.1 |
MB 229.1
|
RAVENOL VMS 5W-30
For engine
RAVENOL VMS SAE 5W-30 is a synthetic, low friction engine oil with CleanSynto® technology for Daimler passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
Manufacturer Approved:
MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
Compliance with the requirements:
Chrysler MS-11106
Replacement via: RAVENOL RSS SAE 10W-60
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1111144-001
1111144-001-01-999
Code:
4014835840416
Volume:
4 L
Vendor code:
1111144-004
1111144-004-01-999
Code:
4014835840447
Volume:
5 L
Vendor code:
1111144-005
1111144-005-01-999
Code:
4014835840805
Volume:
10 L
Vendor code:
1111144-010
Volume:
20 L
Vendor code:
1111144-020
Volume:
20 L, ecobox
Vendor code:
1111144-B20
Volume:
60 L
Vendor code:
1111144-060
Volume:
60 L, print
Vendor code:
1111144-D60
Volume:
208 L
Vendor code:
1111144-208
Volume:
208 L, print
Vendor code:
1111144-D28
Volume:
1000 L
Vendor code:
1111144-700
RAVENOL VMS SAE 5W-30 achieves a high viscosity index through its formulation with special base oils.The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL VMS SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL VMS SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
RAVENOL VMS SAE 5W-30 is Oil which prevents effectively the clogging of the diesel soot particulate filter.
Suitable for extended oil change intervals where recommended by manufacturer.
Application Note
RAVENOL VMS SAE 5W-30 is suitable for demanding engines as high performance low friction engine oil. It is recommended for modern passenger car gasoline and diesel engines, including turbo versions and direct injection engines, for all operation conditions.
RAVENOL VMS SAE 5W-30 is recommended for use in vehicles with diesel particulate filters. It is especially formulated according to the Daimler Low SPAsh multigrade service engine oil specification MB 229.52 and suitable for BlueTEC OM642.
Characteristics
- Fuel savings in partial and full load
- Excellent wear protection and high viscosity index secure evenunder high speed driving conditions engine longevity
- Excellent cold starting properties even at low temperatures below -30°C
- A safe lubrication film at high operating temperatures.
- Low volatilization tendency, thereby lower oil consumption
- No oil-related deposits in combustion chambers in the piston ring zone and on valves
- Neutrality towards sealing materials
- Extended oil change intervals protect natural resources
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| ACEA | C3 |
C3
|
||
| Manufacturer Approved | MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52 |
MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
|
||
| Recomendations | Chrysler MS-11106 |
Chrysler MS-11106
|
||
| Density at 20 °C | g/cm³ | 847 | EN ISO 12185 |
847
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 72.8 | DIN 51562-1 |
72.8
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 165 | DIN ISO 2909 |
165
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5258 | ASTM D5293 |
5258
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 22500 | ASTM D4684 |
22500
mPa*s
ASTM D4684
|
| Noack Volatility | % | 7 | ASTM D5800 |
7
%
ASTM D5800
|
| tbn | mgKOH/g | 8.6 | ASTM D2896 |
8.6
mgKOH/g
ASTM D2896
|
| Approvals | Chrysler MS-11106, MB 229.31, MB 229.51, MB 229.52 |
Chrysler MS-11106, MB 229.31, MB 229.51, MB 229.52
|
For engine
RAVENOL Motobike 4-T Ester SAE 5W-30 is a 4 stroke high performance low friction multi-range engine oil which was especially produced for 4 stroke motorbikes. Because of its synthetic components and a balancedinnovative additivation it is suitablefor superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1171101-020
Volume:
60 L
Vendor code:
1171101-060
Volume:
208 L
Vendor code:
1171101-208
The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase. Because of a considerable fuel saving RAVENOL Motobike 4-T Ester SAE 5W-30 contributes to protect theenvironment by reducing the emissions.
Application instructions
RAVENOL Motobike 4-T Ester SAE 5W-30 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 5W-30 is requested.
Characteristics
- a very stable and excellent viscosity behaviour
- an excellent shear stability
- very good cold start characteristics
- a safe lubrication film at very high operating temperatures
- a considerable lower evaporation tendency, therefore a lower oil consumption
- very good detergent and dispersant characteristics
- a very good corrosion protection
- protection against foam formation
- suitable for catalysts
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.6 | DIN 51562-1 |
11.6
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 69 | DIN 51562-1 |
69
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 165 | DIN ISO 2909 |
165
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5683 | ASTM D5293 |
5683
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 23.000 | ASTM D4684 |
23.000
mPa*s
ASTM D4684
|
| Noack Volatility | % | 5.6 | ASTM D5800 |
5.6
%
ASTM D5800
|
| tbn | mgKOH/g | 7.9 | ASTM D2896 |
7.9
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|
For motorcycles
RAVENOL Motobike 4-T Ester SAE 10W-30 is a future-oriented engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. Because of its synthetic components and a balanced innovative additivation it is suitable for superior engines of motorbikes with wet couplings and oil lubricated couplings.
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1172111-020
Volume:
60 L
Vendor code:
1172111-060
With RAVENOL Motobike 4-T Ester SAE 10W-30 a solid and high loadable engine oil was developed. The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase.
RAVENOL Motobike 4-T Ester SAE 10W-30 fulfils the high tech demands of the latest powerful engine generation.
Application instructions
RAVENOL Motobike 4-T Ester SAE 10W-30 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 10W-30 JASO MA/MA2 is requested.
Characteristics
- A quick lubrication of the engine
- A low evaporation tendency, therefore a lower oil consumption
- Safety against sludge accumulation, cokings and corrosion even under unfavourable operating conditions
- Guarantee of the function of the hydro tappets at all temperatures
- No oil limited deposits in combustion chambers, at the piston ring and valves
- Unchanged viscosity during the whole oil change interval, a high viscosity index
- Neutral against sealing materials
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | SN |
SN
|
||
| JASO | MA2 |
MA2
|
||
| Suitable for | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Density at 20 °C | g/cm³ | 851 | EN ISO 12185 |
851
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 78.9 | DIN 51562-1 |
78.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 148 | DIN ISO 2909 |
148
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5660 | ASTM D5293 |
5660
mPa*s
ASTM D5293
|
| Noack Volatility | % | 3.3 | ASTM D5800 |
3.3
%
ASTM D5800
|
| tbn | mgKOH/g | 7.9 | ASTM D2896 |
7.9
mgKOH/g
ASTM D2896
|
| Recommendations | Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha |
Aprilia, BMW, Ducati, Honda, Kawasaki, Moto-Guzzi, Suzuki, Triumph, Yamaha
|
||
| Engine cycle | 4T |
4T
|