Search by VIN / Frame, vehicle make, model, type, unit name, or by the part number of any oil:

Search
Honda Accord VII / Accord Tourer IV, CL / CM / CN

Oil for Honda, Accord VII / Accord Tourer IV, CL / CM / CN, Accord 2.4 2WD (K24A4/K24A8) (CM5/CM7) (119 kW) (124 kW)

Honda Model (Accord VII / Accord Tourer IV, CL / CM / CN) to find out what kind of oil is used for it

Honda Accord VII / Accord Tourer IV, CL / CM / CN Accord 2.4 2WD (K24A4/K24A8) (CM5/CM7) (119 kW) (124 kW)from 2002 to 2008 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Fuel: Gasoline
Drive: Front-wheel drive
Engine: Single row
Number of cylinders: 4
Displacement: 2354 cc
Valves per cylinder: 4
Power:

Nodes and assemblies

Engine K24A4 / K24A8

Liquid volume (basic): 5.6 L
RAVENOL VFE SAE 5W-20

RAVENOL VFE SAE 5W-20

CleanSynto®
For engine

RAVENOL VFE SAE 5W-20 is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.

Compliance with the requirements:
Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 925-A, Ford WSS-M2C 925-B, Ford WSS-M2C 930-A, Ford WSS-M2C 930-B, Ford WSS-M2C 948-B, Honda/Acura HTO-06, Jaguar/Land Rover STJLR.03.5004

Buy Online
Show more Hide details

SAE:  5W-20

API:  SN Plus SP (RC)

ILSAC:  GF-6A

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1111311-001
1111311-001-01-999

Code:
4014835846036

Volume:
4 L

Vendor code:
1111311-004
1111311-004-01-999

Code:
4014835853638

Volume:
5 L

Vendor code:
1111311-005
1111311-005-01-999

Code:
4014835846067

Volume:
10 L

Vendor code:
1111311-010
1111311-010-01-999

Code:
4014835846159

Volume:
20 L

Vendor code:
1111311-020
1111311-020-01-999

Code:
4014835846173

Volume:
20 L, ecobox

Vendor code:
1111311-B20
1111311-B20-01-888

Code:
4014835849587

Volume:
60 L

Vendor code:
1111311-060
1111311-060-01-999

Code:
4014835846197

Volume:
60 L, print

Vendor code:
1111311-D60
 

Volume:
208 L

Vendor code:
1111311-208
1111311-208-01-999

Code:
4014835846210

Volume:
208 L, print

Vendor code:
1111311-D28
1111311-D28-01-888

Code:
4014835863019

Volume:
1000 L

Vendor code:
1111311-700
 

RAVENOL VFE SAE 5W-20 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL VFE SAE 5W-20 contributes to protect the environment by reducing the emissions.

RAVENOL VFE SAE 5W-20 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Suitable for extended oil change intervals where recommended by manufacturer.

Application instructions

RAVENOL VFE SAE 5W-20 is an universal fuel-efficient engine oil, a top-quality product for modern passenger cars with gasoline and diesel engines.

Characteristics

  • Guaranteed fastest possible lubrication of the engine.
  • High fuel economy (FE) effect due to the base oils and additives used.
  • Low volatilization tendency, thereby lower oil consumption.
  • Provides protection against sludging, coking, varnish and corrosion even under unfavorable operating conditions.
  • No oil-related deposits in combustion chambers in the piston ring zone and on valves.
  • Ensures the function of the hydraulic tappets at all temperatures.
  • Stable engine oil, no NOx oxidation.
  • Good soot absorption and dispersion.
  • Neutral towards sealing materials.
Parameter Unit Value Tests
SAE 5W-20
5W-20
Type Synthetic
Synthetic
API SN Plus, SP (RC)
SN Plus, SP (RC)
ILSAC GF-6A
GF-6A
Recomendations Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 925-A, Ford WSS-M2C 925-B, Ford WSS-M2C 930-A, Ford WSS-M2C 930-B, Ford WSS-M2C 948-B, Honda/Acura HTO-06, Jaguar/Land Rover STJLR.03.5004
Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 925-A, Ford WSS-M2C 925-B, Ford WSS-M2C 930-A, Ford WSS-M2C 930-B, Ford WSS-M2C 948-B, Honda/Acura HTO-06, Jaguar/Land Rover STJLR.03.5004
Suitable for Hyundai, KIA, Mazda, Mitsubishi, Nissan, Suzuki, Toyota
Hyundai, KIA, Mazda, Mitsubishi, Nissan, Suzuki, Toyota
Density at 20 °C g/cm³ 853 EN ISO 12185
853 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 8.2 DIN 51562-1
8.2 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 47.8 DIN 51562-1
47.8 mm²/s DIN 51562-1
Viscosity Index VI 147 DIN ISO 2909
147 DIN ISO 2909
CCS Viscosity at -30 °C mPa*s 6000 ASTM D5293
6000 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °C mPa*s 17500 ASTM D4684
17500 mPa*s ASTM D4684
Noack Volatility % 9 ASTM D5800
9 % ASTM D5800
tbn mgKOH/g 7.8 ASTM D2896
7.8 mgKOH/g ASTM D2896
Approvals Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 925-A, Ford WSS-M2C 925-B, Ford WSS-M2C 930-A, Ford WSS-M2C 930-B, Ford WSS-M2C 948-B, Honda/Acura HTO-06, Jaguar/Land Rover STJLR.03.5004
Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 925-A, Ford WSS-M2C 925-B, Ford WSS-M2C 930-A, Ford WSS-M2C 930-B, Ford WSS-M2C 948-B, Honda/Acura HTO-06, Jaguar/Land Rover STJLR.03.5004
Recommendations Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C925-A, Ford WSS-M2C925-B, Ford WSS-M2C930-A, Ford WSS-M2C930-B, Ford WSS-M2C948-B, Honda/Acura HTO-06, Hyundai, Jaguar Land Rover STJLR.03.5004, KIA, Mazda, Mitsubishi, Nissan, Suzuki, Toyota
Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C925-A, Ford WSS-M2C925-B, Ford WSS-M2C930-A, Ford WSS-M2C930-B, Ford WSS-M2C948-B, Honda/Acura HTO-06, Hyundai, Jaguar Land Rover STJLR.03.5004, KIA, Mazda, Mitsubishi, Nissan, Suzuki, Toyota
RAVENOL EHS SAE 0W-20

RAVENOL EHS SAE 0W-20

CleanSynto®
For engine

RAVENOL EHS SAE 0W-20 is a synthetic, low-friction engine oil with CleanSynto® technology for car gasoline and diesel engines, with and without turbocharging and direct injection.

Manufacturer Approved:
BMW Longlife-17 FE+, MB-Approval 229.71, MB-Approval 229.72, Volvo VCC RBS0-2AE

Compliance with the requirements:
BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C 947-A, Ford WSS-M2C 952-A1, Ford WSS-M2C 954-A1, Ford WSS-M2C 962-A1, Jaguar/Land Rover STJLR.03.5006, Opel OV 040 1547 - A20, PSA B71 2010, VWC 53057

Buy Online
Show more Hide details

SAE:  0W-20

API:  SQ (RC)

ACEA:  C5 C6

ILSAC:  GF-7A

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1111113-001
1111113-001-01-999

Code:
4014835858077

Volume:
4 L

Vendor code:
1111113-004
1111113-004-01-999

Code:
4014835858107

Volume:
5 L

Vendor code:
1111113-005
1111113-005-01-999

Code:
4014835858138

Volume:
10 L

Vendor code:
1111113-010
1111113-010-01-999

Code:
4014835886735

Volume:
20 L

Vendor code:
1111113-020
1111113-020-01-999

Code:
4014835858312

Volume:
20 L, ecobox

Vendor code:
1111113-B20
1111113-B20-01-888

Code:
4014835858336

Volume:
60 L

Vendor code:
1111113-060
1111113-060-01-999

Code:
4014835858374

Volume:
60 L, print

Vendor code:
1111113-D60
 

Volume:
208 L

Vendor code:
1111113-208
1111113-208-01-999

Code:
4014835858411

Volume:
208 L, print

Vendor code:
1111113-D28
 

Volume:
1000 L

Vendor code:
1111113-700
 

RAVENOL EHS SAE 0W-20 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By a significant fuel economy RAVENOL EHS SAE 0W-20 contributes by reducing emissions to protect the environment. It minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL EHS SAE 0W-20 ensures compliance with the viscosity class even over long oil runtimes over the entire oil change interval.

Extended oil change intervals according to the manufacturer’s instructions.

Application instructions

RAVENOL EHS SAE 0W-20 is a universal fuel-efficient engine oil, a top product for modern passenger car petrol and diesel engines. It is also suitable for use in hybrid vehicles from various manufacturers.

Characteristics

  • Guaranteed fastest possible lubrication of the engine.
  • High fuel economy (FE) effect due to the base oils and additives used.
  • Low volatilization tendency, thereby lower oil consumption.
  • Provides protection against sludging, coking, varnish and corrosion even under unfavorable operating conditions.
  • No oil-related deposits in combustion chambers in the piston ring zone and on valves.
  • Ensures the function of the hydraulic tappets at all temperatures.
  • Stable engine oil, no NOx oxidation.
  • Good soot absorption and dispersion.
  • Neutral towards sealing materials.
  • Reduces CO2 emissions, protect the environment.
  • Ideal for hybrid vehicles.
Parameter Unit Value Tests
SAE 0W-20
0W-20
Type Synthetic
Synthetic
API SQ (RC)
SQ (RC)
ACEA C5, C6
C5, C6
ILSAC GF-7A
GF-7A
Manufacturer Approved BMW Longlife-17 FE+, MB-Approval 229.71, MB-Approval 229.72, Volvo VCC RBS0-2AE
BMW Longlife-17 FE+, MB-Approval 229.71, MB-Approval 229.72, Volvo VCC RBS0-2AE
Recomendations BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C 947-A, Ford WSS-M2C 952-A1, Ford WSS-M2C 954-A1, Ford WSS-M2C 962-A1, Jaguar/Land Rover STJLR.03.5006, Opel OV 040 1547 - A20, PSA B71 2010, VWC 53057
BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C 947-A, Ford WSS-M2C 952-A1, Ford WSS-M2C 954-A1, Ford WSS-M2C 962-A1, Jaguar/Land Rover STJLR.03.5006, Opel OV 040 1547 - A20, PSA B71 2010, VWC 53057
Suitable for Geely, Lynk & Co, Polestar, Volvo
Geely, Lynk & Co, Polestar, Volvo
Density at 20 °C g/cm³ 842 EN ISO 12185
842 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 8.5 DIN 51562-1
8.5 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 43.8 DIN 51562-1
43.8 mm²/s DIN 51562-1
Viscosity Index VI 174 DIN ISO 2909
174 DIN ISO 2909
CCS Viscosity at -35 °C mPa*s 5490 ASTM D5293
5490 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -40 °C mPa*s 12.700 ASTM D4684
12.700 mPa*s ASTM D4684
Noack Volatility % 10.4 ASTM D5800
10.4 % ASTM D5800
tbn mgKOH/g 8.8 ASTM D2896
8.8 mgKOH/g ASTM D2896
Approvals BMW Longlife-14 FE+, BMW Longlife-17 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C 947-A, Ford WSS-M2C 952-A1, Ford WSS-M2C 954-A1, Ford WSS-M2C 962-A1, Jaguar/Land Rover STJLR.03.5006, MB 229.71, MB 229.72, Opel OV 040 1547 - A20, PSA B71 2010, VWC 53057, Volvo VCC RBS0-2AE
BMW Longlife-14 FE+, BMW Longlife-17 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C 947-A, Ford WSS-M2C 952-A1, Ford WSS-M2C 954-A1, Ford WSS-M2C 962-A1, Jaguar/Land Rover STJLR.03.5006, MB 229.71, MB 229.72, Opel OV 040 1547 - A20, PSA B71 2010, VWC 53057, Volvo VCC RBS0-2AE
Recommendations BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C947-A, Ford WSS-M2C952-A1, Ford WSS-M2C954-A1, Ford WSS-M2C962-A1, Geely, Jaguar Land Rover STJLR.03.5006, Lynk & Co, Opel OV 040 1547 - A20, PSA B71 2010, Polestar, VWC 53057, Volvo
BMW Longlife-14 FE+, Chrysler MS-12145, Fiat 9.55535-DSX, Fiat 9.55535-GSX, Ford WSS-M2C947-A, Ford WSS-M2C952-A1, Ford WSS-M2C954-A1, Ford WSS-M2C962-A1, Geely, Jaguar Land Rover STJLR.03.5006, Lynk & Co, Opel OV 040 1547 - A20, PSA B71 2010, Polestar, VWC 53057, Volvo
RAVENOL FO SAE 5W-30

RAVENOL FO SAE 5W-30

CleanSynto®
For engine

RAVENOL FO SAE 5W-30 is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.

Compliance with the requirements:
Fiat 9.55535-G1, Ford WSS-M2C 913-A, Ford WSS-M2C 913-B, Ford WSS-M2C 913-C, Ford WSS-M2C 913-D, Jaguar/Land Rover STJLR.03.5003, MB 229.6, Renault RN 0700, VWC 53036

Buy Online
Show more Hide details

SAE:  5W-30

API:  CF SL

ACEA:  A5 B5

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1111115-001
1111115-001-01-999

Code:
4014835722613

Volume:
4 L

Vendor code:
1111115-004
1111115-004-01-999

Code:
4014835722699

Volume:
5 L

Vendor code:
1111115-005
1111115-005-01-999

Code:
4014835722651

Volume:
10 L

Vendor code:
1111115-010
1111115-010-01-999

Code:
4014835722644

Volume:
20 L

Vendor code:
1111115-020
1111115-020-01-999

Code:
4014835722620

Volume:
20 L, ecobox

Vendor code:
1111115-B20
1111115-B20-01-888

Code:
4014835772922

Volume:
60 L

Vendor code:
1111115-060
1111115-060-01-999

Code:
4014835722668

Volume:
60 L, print

Vendor code:
1111115-D60
1111115-D60-01-888

Code:
4014835722637

Volume:
208 L

Vendor code:
1111115-208
1111115-208-01-999

Code:
4014835722682

Volume:
208 L, print

Vendor code:
1111115-D28
1111115-D28-01-888

Code:
4014835722606

Volume:
1000 L

Vendor code:
1111115-700
 

RAVENOL FO SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL FO SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL FO SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Suitable for extended oil change intervals where recommended by manufacturer.

Application instructions

RAVENOL FO SAE 5W-30 is suitable as motor oil for fuel-efficient year-round use in modern petrol and diesel engines in passenger cars, station wagon's, vans and similar vehicles from FORD, RENAULT, Toyota, Hyundai, KIA, Mazda, Honda, Nissan und Mitsubishi.

Characteristics

  • Fuel economy in part and full power operation.
  • Very stable and excellent viscosity behaviour.
  • Excellent shear stability.
  • Excellent cold starting characteristics.
  • A safe lubricant film at high operating temperatures.
  • High wear and corrosion protection, high oxidation stability.
  • Prevention of sludge formation.
  • Excellent detergent- and dispersant characteristics.
  • Catalyst cleaning.
Parameter Unit Value Tests
SAE 5W-30
5W-30
Type Synthetic
Synthetic
API CF, SL
CF, SL
ACEA A5, B5
A5, B5
Recomendations Fiat 9.55535-G1, Ford WSS-M2C 913-A, Ford WSS-M2C 913-B, Ford WSS-M2C 913-C, Ford WSS-M2C 913-D, Jaguar/Land Rover STJLR.03.5003, MB 229.6, Renault RN 0700, VWC 53036
Fiat 9.55535-G1, Ford WSS-M2C 913-A, Ford WSS-M2C 913-B, Ford WSS-M2C 913-C, Ford WSS-M2C 913-D, Jaguar/Land Rover STJLR.03.5003, MB 229.6, Renault RN 0700, VWC 53036
Density at 20 °C g/cm³ 849 EN ISO 12185
849 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 10 DIN 51562-1
10 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 56.6 DIN 51562-1
56.6 mm²/s DIN 51562-1
Viscosity Index VI 165 DIN ISO 2909
165 DIN ISO 2909
CCS Viscosity at -30 °C mPa*s 4300 ASTM D5293
4300 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °C mPa*s 14.000 ASTM D4684
14.000 mPa*s ASTM D4684
Noack Volatility % 9.4 ASTM D5800
9.4 % ASTM D5800
tbn mgKOH/g 10.9 ASTM D2896
10.9 mgKOH/g ASTM D2896
Approvals Fiat 9.55535-G1, Ford WSS-M2C 913-A, Ford WSS-M2C 913-B, Ford WSS-M2C 913-C, Ford WSS-M2C 913-D, Jaguar/Land Rover STJLR.03.5003, MB 229.6, Renault RN0700, VWC 53036
Fiat 9.55535-G1, Ford WSS-M2C 913-A, Ford WSS-M2C 913-B, Ford WSS-M2C 913-C, Ford WSS-M2C 913-D, Jaguar/Land Rover STJLR.03.5003, MB 229.6, Renault RN0700, VWC 53036
Recommendations Fiat 9.55535-G1, Ford WSS-M2C913-A, Ford WSS-M2C913-B, Ford WSS-M2C913-C, Ford WSS-M2C913-D, Jaguar Land Rover STJLR.03.5003, MB 229.6, Renault RN0700, VWC 53036
Fiat 9.55535-G1, Ford WSS-M2C913-A, Ford WSS-M2C913-B, Ford WSS-M2C913-C, Ford WSS-M2C913-D, Jaguar Land Rover STJLR.03.5003, MB 229.6, Renault RN0700, VWC 53036
RAVENOL HDX SAE 5W-30

RAVENOL HDX SAE 5W-30

CleanSynto®
For engine

RAVENOL HDX SAE 5W-30 is a synthetic, low-friction engine oil with CleanSynto® technology for car gasoline engines, with and without turbocharging and direct injection, such as Turbo-GDI and direct injection.

Manufacturer Approved:
GM dexos1® Gen 1, GM dexos1® Gen 2, GM dexos1® Gen 3

Compliance with the requirements:
Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 929-A, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034

Show more Hide details

SAE:  5W-30

API:  SQ (RC)

ILSAC:  GF-7A

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1111125-001
1111125-001-01-999

Code:
4014835858541

Volume:
4 L

Vendor code:
1111125-004
1111125-004-01-999

Code:
4014835858572

Volume:
5 L

Vendor code:
1111125-005
1111125-005-01-999

Code:
4014835858602

Volume:
10 L

Vendor code:
1111125-010
1111125-010-01-999

Code:
4014835858633

Volume:
20 L

Vendor code:
1111125-020
1111125-020-01-999

Code:
4014835858671

Volume:
20 L, ecobox

Vendor code:
1111125-B20
1111125-B20-01-888

Code:
4014835858657

Volume:
60 L

Vendor code:
1111125-060
1111125-060-01-999

Code:
4014835858718

Volume:
60 L, print

Vendor code:
1111125-D60
 

Volume:
208 L

Vendor code:
1111125-208
1111125-208-01-999

Code:
4014835858756

Volume:
208 L, print

Vendor code:
1111125-D28
 

Volume:
1000 L

Vendor code:
1111125-700
 

With its new formulation, RAVENOL HDX SAE 5W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking.

RAVENOL HDX SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL HDX SAE 5W-30 contributes to protect the environment by reducing the emissions.

RAVENOL HDX SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL HDX SAE 5W-30 helps to avoid low speed pre-ignition LSPI (Low Speed ​​Pre-ignition). This can help avoid engine damage.

Suitable for extended oil change intervals where recommended by manufacturer.

Application instructions

RAVENOL HDX SAE 5W-30 is a high-performance low-friction engine oil for modern engines. It is recommended by OPEL/GENERAL MOTORS corresponding to dexos1 specification for modern car engines under all operating conditions.

RAVENOL HDX SAE 5W-30 is also suitable for the shown specifications of Ford, Chrysler and Fiat.

Characteristics

  • Fuel savings in partial and full load operation
  • Outstanding wear protection and high viscosity index ensure engine longevity, even under high-speed driving conditions
  • Excellent cold-start properties even at low temperatures below -25°C
  • A safe lubricating film at high operating temperatures
  • Low evaporation tendency, thus low oil consumption
  • No oil-based deposits in combustion chambers, in the piston ring zone and on valves
  • Neutrality towards sealing materials
  • Extended oil change intervals protect natural resources
Parameter Unit Value Tests
SAE 5W-30
5W-30
Type Synthetic
Synthetic
API SQ (RC)
SQ (RC)
ILSAC GF-7A
GF-7A
Manufacturer Approved GM dexos1® Gen 1, GM dexos1® Gen 2, GM dexos1® Gen 3
GM dexos1® Gen 1, GM dexos1® Gen 2, GM dexos1® Gen 3
Recomendations Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 929-A, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 929-A, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
Density at 20 °C g/cm³ 844 EN ISO 12185
844 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 10.8 DIN 51562-1
10.8 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 59.8 DIN 51562-1
59.8 mm²/s DIN 51562-1
Viscosity Index VI 173 DIN ISO 2909
173 DIN ISO 2909
CCS Viscosity at -30 °C mPa*s 3630 ASTM D5293
3630 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -35 °C mPa*s 13.500 ASTM D4684
13.500 mPa*s ASTM D4684
Noack Volatility % 8.1 ASTM D5800
8.1 % ASTM D5800
tbn mgKOH/g 7.8 ASTM D2896
7.8 mgKOH/g ASTM D2896
Approvals Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 929-A, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, GM dexos1® Gen 1, GM dexos1® Gen 2, GM dexos1® Gen 3, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 929-A, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, GM dexos1® Gen 1, GM dexos1® Gen 2, GM dexos1® Gen 3, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
Recommendations Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C929-A, Ford WSS-M2C946-A, Ford WSS-M2C946-B1, Ford WSS-M2C961-A1, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
Chrysler MS-13340, Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C929-A, Ford WSS-M2C946-A, Ford WSS-M2C946-B1, Ford WSS-M2C961-A1, Honda/Acura HTO-06, Opel OV 040 1547 - G30, VWC 53034
RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30

CleanSynto®
For engine

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 is a synthetic low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

Manufacturer Approved:
MB-Approval 229.5, Renault RN 0710, Volvo VCC 95200356 - Service Fill

Compliance with the requirements:
BMW Longlife-98, Renault RN 0700, VW 502.00, VW 505.00

Buy Online
Show more Hide details

SAE:  0W-30

API:  SM

ACEA:  A3 B4

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1111138-001
1111138-001-01-999

Code:
4014835795310

Volume:
4 L

Vendor code:
1111138-004
1111138-004-01-999

Code:
4014835795396

Volume:
5 L

Vendor code:
1111138-005
1111138-005-01-999

Code:
4014835795358

Volume:
10 L

Vendor code:
1111138-010
1111138-010-01-999

Code:
4014835795341

Volume:
20 L

Vendor code:
1111138-020
1111138-020-01-999

Code:
4014835795327

Volume:
20 L, ecobox

Vendor code:
1111138-B20
1111138-B20-01-888

Code:
4014835868250

Volume:
60 L, print

Vendor code:
1111138-D60
1111138-D60-01-888

Code:
4014835795334

Volume:
208 L, print

Vendor code:
1111138-D28
1111138-D28-01-888

Code:
4014835795303

Volume:
1000 L

Vendor code:
1111138-700
 

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

Because of a considerable fuel saving RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 contributes to protect the environment by reducing the emissions.

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 guarantees operational safety for all driving conditions, such as extreme stop and go traffic as well as high speed highway trips.

Suitable for extended oil change intervals where recommended by manufacturer.

Application instructions

RAVENOL Super Synthetic Hydrocrack SSH SAE 0W-30 is suitable as an universal fuel economy motor oil for year-round use in all gasoline and diesel engines in passenger cars, station wagons, delivery vans and similar vehicles.

Characteristics

  • High abrasion resistance
  • Fuel saving because of easy running characteristics
  • Excellent detergent and dispersant characteristics
  • Prevention of black sludge creation
  • Long endurance because of high oxidation stability
  • Excellent cold start performance
  • Very good viscosity temperature behaviour
  • Low evaporation
  • Suitable for catalysts
Parameter Unit Value Tests
SAE 0W-30
0W-30
Type Synthetic
Synthetic
API SM
SM
ACEA A3, B4
A3, B4
Manufacturer Approved MB-Approval 229.5, Renault RN 0710, Volvo VCC 95200356 - Service Fill
MB-Approval 229.5, Renault RN 0710, Volvo VCC 95200356 - Service Fill
Recomendations BMW Longlife-98, Renault RN 0700, VW 502.00, VW 505.00
BMW Longlife-98, Renault RN 0700, VW 502.00, VW 505.00
Density at 20 °C g/cm³ 842 EN ISO 12185
842 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 12.1 DIN 51562-1
12.1 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 67.2 DIN 51562-1
67.2 mm²/s DIN 51562-1
Viscosity Index VI 178 DIN ISO 2909
178 DIN ISO 2909
CCS Viscosity at -35 °C mPa*s 5940 ASTM D5293
5940 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -40 °C mPa*s 24.300 ASTM D4684
24.300 mPa*s ASTM D4684
Noack Volatility % 9 ASTM D5800
9 % ASTM D5800
tbn mgKOH/g 10 ASTM D2896
10 mgKOH/g ASTM D2896
Approvals BMW Longlife-98, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00, Volvo VCC 95200356 - Service Fill
BMW Longlife-98, MB 229.5, Renault RN0700, Renault RN0710, VW 502.00, VW 505.00, Volvo VCC 95200356 - Service Fill
Recommendations BMW Longlife-98, Renault RN0700, VW 502 00, VW 505 00
BMW Longlife-98, Renault RN0700, VW 502 00, VW 505 00
RAVENOL TSJ SAE 10W-30

RAVENOL TSJ SAE 10W-30

CleanSynto®
For engine

RAVENOL TSJ SAE 10W-30 is a semi-synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Formulated to minimise friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer.

Compliance with the requirements:
Chrysler MS-6395, Fiat 9.55535-CR1

Buy Online
Show more Hide details

SAE:  10W-30

API:  SQ (RC)

ILSAC:  GF-7A

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1112106-001
1112106-001-01-999

Code:
4014835724013

Volume:
4 L

Vendor code:
1112106-004
1112106-004-01-999

Code:
4014835724099

Volume:
5 L

Vendor code:
1112106-005
1112106-005-01-999

Code:
4014835724051

Volume:
10 L

Vendor code:
1112106-010
1112106-010-01-999

Code:
4014835852464

Volume:
20 L

Vendor code:
1112106-020
 

Volume:
20 L, ecobox

Vendor code:
1112106-B20
1112106-B20-01-888

Code:
4014835774421

Volume:
60 L

Vendor code:
1112106-060
 

Volume:
60 L, print

Vendor code:
1112106-D60
1112106-D60-01-888

Code:
4014835724037

Volume:
208 L

Vendor code:
1112106-028
1112106-208-01-888

Code:
4014835724006

Volume:
208 L

Vendor code:
1112106-208
 

Volume:
208 L, print

Vendor code:
1112106-D28
1112106-D28-01-888

Volume:
1000 L

Vendor code:
1112106-700
 

RAVENOL TSJ SAE 10W-30 is especially produced for the use in cars of Japanese and Asian manufacturers.

Application instructions

RAVENOL TSJ SAE 10W-30 is suitable for the use in all modern cars of Japanese and Asian manufacturers all the year.

Characteristics

  • An universal use in all modern petrol and diesel engines
  • A quick lubrication of the engine even at low temperatures
  • A low evaporation tendency, therefore a low oil consumption
  • Safety against sludge accumulations, cokings and corrosion even under unfavourable operating conditions
  • Guarantee of the function of the hydro tappets at all temperatures
  • No oil limited deposits in combustion chambers, at the piston ring and valves
  • Unchanged viscosity during the whole oil change interval, a high viscosity index
  • Neutral behaviour against sealing materials
Parameter Unit Value Tests
SAE 10W-30
10W-30
Type Semi-synthetic
Semi-synthetic
API SQ (RC)
SQ (RC)
ILSAC GF-7A
GF-7A
Recomendations Chrysler MS-6395, Fiat 9.55535-CR1
Chrysler MS-6395, Fiat 9.55535-CR1
Suitable for Daewoo, Daihatsu, Honda, Hyundai, Isuzu, KIA, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota
Daewoo, Daihatsu, Honda, Hyundai, Isuzu, KIA, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota
Density at 20 °C g/cm³ 854 EN ISO 12185
854 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 10.2 DIN 51562-1
10.2 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 64.3 DIN 51562-1
64.3 mm²/s DIN 51562-1
Viscosity Index VI 145 DIN ISO 2909
145 DIN ISO 2909
CCS Viscosity at -25 °C mPa*s 4830 ASTM D5293
4830 mPa*s ASTM D5293
Low Temp. Pumping viscosity (MRV) at -30 °C mPa*s 11.300 ASTM D4684
11.300 mPa*s ASTM D4684
Noack Volatility % 9.9 ASTM D5800
9.9 % ASTM D5800
tbn mgKOH/g 7.4 ASTM D2896
7.4 mgKOH/g ASTM D2896
Approvals Chrysler MS-6395, Fiat 9.55535-CR1
Chrysler MS-6395, Fiat 9.55535-CR1
Recommendations Chrysler MS-6395, Daewoo, Daihatsu, Fiat 9.55535-CR1, Honda, Hyundai, Isuzu, KIA, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota
Chrysler MS-6395, Daewoo, Daihatsu, Fiat 9.55535-CR1, Honda, Hyundai, Isuzu, KIA, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota
RAVENOL Professional Engine Cleaner

RAVENOL Professional Engine Cleaner

RAVENOL Professional Engine Cleaner is active concentrate for longer oil cleanliness for all petrol and diesel engines (with and without catalytic converter).

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
300 ml

Vendor code:
1390323-300
1390323-300-05-999

Code:
4014835889378

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

RAVENOL Professional Engine Cleaner effectively breaks down dirt accumulation and sludge deposits in the engine compartment using intensive-cleaning tensides and removes these effectively when draining used oil.

RAVENOL Professional Engine Cleaner cleans and rinses the entire engine system.

Application instructions

RAVENOL Professional Engine Cleaner is added to the warm motor oil.

Area of application:

-If black sludge is suspected

-In the event of hydraulic tappets rattling

-In the event of delayed oil change

-For soiled engines or used oil

-Preventively at every oil change to avoid contamination of the engine

-Also suitable for oldtimers and engines with belts running in the oil system (wet belts)

 

Dosage: 300 ml RAVENOL Professional Engine Cleaner are sufficient for one application of approx. 5L Oil, regardless of manufacturer and motor size.

 

Application: Add the contents to the warm motor oil before changing oil. Do not go below the minimum oil level. For maximum effect, allow to run for up to 10 minutes. Afterwards, immediately replace oil and filter.

 

RAVENOL Professional Engine Cleaner is tried and tested for aggregates with motor oils based on mineraloil and synthetic oil.

Characteristics

  • Long-term effectiveness and clean fresh oil
  • Remedy for soiled engines
  • Protection against compression loss in the area of the piston rings
  • Leads to better exhaust emissions and increases the performance of the engine
Parameter Unit Value Tests
Viscosity at 40 °C mm²/s 5 DIN EN ISO 3104
5 mm²/s DIN EN ISO 3104
Color Yellow visual
Yellow visual

Transmission, automatic in a unit with final drive

RAVENOL ATF Type Z1 Fluid

RAVENOL ATF Type Z1 Fluid

For automatic transmission

RAVENOL ATF Type Z1 Fluid is synthetic ATF (Automatic Transmission Fluid) based on high-quality hydrocrack oils with special additives and inhibition which guarantee a perfect function of the automatic transmission.

Buy Online
Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211109-001
1211109-001-01-999

Code:
4014835719217

Volume:
4 L

Vendor code:
1211109-004
1211109-004-01-999

Code:
4014835719293

Volume:
10 L

Vendor code:
1211109-010
1211109-010-01-999

Code:
4014835719248

Volume:
20 L

Vendor code:
1211109-020
1211109-020-01-999

Code:
4014835719224

Volume:
20 L, ecobox

Vendor code:
1211109-B20
1211109-B20-01-888

Code:
4014835785229

Volume:
60 L

Vendor code:
1211109-060
 

Volume:
60 L, print

Vendor code:
1211109-D60
1211109-D60-01-888

Code:
4014835719231

Volume:
208 L

Vendor code:
1211109-208
 

Volume:
208 L, print

Vendor code:
1211109-D28
1211109-D28-01-888

Code:
4014835719200

RAVENOL ATF Type Z1 Fluid is ATF (Automatic Transmission Fluid) of latest generation for all 4- and 5-stroke transmission of Honda. It guarantees in any mode for maximum wear protection.

RAVENOL ATF Type Z1 Fluid is red coloured.

Application instructions

RAVENOL ATF Type Z1 Fluid was developed for the use in automatic transmissions especially for Honda (BMXA, SLXA, SPCA, BDRA, SMLA, SDMA, MZHA, MZJA, MKZA, GPPA, BAYA, MAYA, SMMA and others).Maintenance-filling under normal operating conditions.

Characteristics

  • Very good lubricating ability even at low temperatures in winter
  • A high, stable viscosity index
  • Very good oxidation stability
  • Protection against corrosion and foam formation
  • Good balanced coefficient of friction
  • A high thermal and oxidative stability
  • An excellent cooling capacity
Parameter Unit Value Tests
Type Synthetic
Synthetic
Density at 20 °C g/cm³ 838 EN ISO 12185
838 g/cm³ EN ISO 12185
Color Red visual
Red visual
Recommendations Honda 08200-9005, Honda 08266-99904, Honda 08266-99907
Honda 08200-9005, Honda 08266-99904, Honda 08266-99907

Mechanical gearbox in a unit with final drive

Liquid volume (basic): 1.9 L
RAVENOL MTF-2 SAE 75W-80

RAVENOL MTF-2 SAE 75W-80

For gearbox

RAVENOL MTF-2 SAE 75W-80 is a PAO based full synthetic low-viscosity transmission oil for modern manual transmission.

Compliance with the requirements:
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538

Buy Online
Show more Hide details

SAE:  75W-80

API:  GL-4 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221103-001
1221103-001-01-999

Code:
4014835719712

Volume:
4 L

Vendor code:
1221103-004
1221103-004-01-999

Code:
4014835719798

Volume:
10 L

Vendor code:
1221103-010
1221103-010-01-999

Code:
4014835719743

Volume:
20 L

Vendor code:
1221103-020
 

Volume:
20 L, ecobox

Vendor code:
1221103-B20
1221103-B20-01-888

Code:
4014835788428

Volume:
60 L

Vendor code:
1221103-060
1221103-060-01-999

Code:
4014835719767

Volume:
60 L, print

Vendor code:
1221103-D60
 

Volume:
208 L

Vendor code:
1221103-208
 

Volume:
208 L, print

Vendor code:
1221103-D28
 

Volume:
1000 L

Vendor code:
1221103-700
 

RAVENOL MTF-2 SAE 75W-80 is designed based on special selected base oils and specially coordinated additive treatment. This exceeds the needs of today's application requirements.

RAVENOL MTF-2 SAE 75W-80 is outstanding for use under severe mechanical and thermal stress on transmission oils, even with extended oil change intervals.

Application instructions

RAVENOL MTF-2 SAE 75W-80 is a full synthetic transmission oil for manual transmissions.

Characteristics

  • A high-pressure stable lubricating film even at high oil temperatures and under high stress.
  • Outstanding shearing stability and excellent thermal stability.
  • Excellent viscosity-temperature properties.
  • High oxidation stability.
  • Excellent wear protection, outstanding EP properties.
  • Low foaming property even at high speeds
  • Good shifting behaviour even in low temperatures, extremely low pour point.
  • Extended life.
Parameter Unit Value Tests
SAE 75W-80
75W-80
Type Full synthetic
Full synthetic
API GL-4, MT-1
GL-4, MT-1
Recomendations BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
Density at 20 °C g/cm³ 847.5 EN ISO 12185
847.5 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.1 DIN 51562-1
9.1 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.8 DIN 51562-1
50.8 mm²/s DIN 51562-1
Viscosity Index VI 163 DIN ISO 2909
163 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 21.900 ASTM D2983
21.900 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1b ASTM D130
1b ASTM D130
Approvals BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
Recommendations AC Delco 10-403, Audi G052532, Audi G055532, BMW 23001434404 MTF-LT-1, BMW 23007533513 MTF-LT-2, BMW 83220309031 MTF-LT-1, Fiat 14621616, Fiat 9.55550-MZ2, Fiat F178.B06, Ford 1382914, Ford 1547953, Ford WSS-M2C200-C3, Ford WSS-M2C200-D2, GM 1940711, GM 88861800, GM 88861801, Honda 08261-99964 Genuine MTF Fluid, Honda 08798-9031 MTF-7289, Hyundai 02200-00130 TOD, Land Rover STC 9157, Land Rover STC 9158, Land Rover TYK500030, MB 235.10 (A 001 989 26 03), MTF-94 Fluid für Land Rover, MG und Mini Cooper, Mitsubishi 3005401, Mitsubishi MZ312644, Nissan 999MP-MTF20P, Nissan KE91699932R, PSA B71 2330, Peugeot 9730A2, Subaru K0321-F0090, Toyota 08885-00705, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW/Audi G 052 911 A2, VW/Audi G 055 538 A2 für ZF 6S450 Amarok 0C6, Volvo 1161681, Volvo 1161745
AC Delco 10-403, Audi G052532, Audi G055532, BMW 23001434404 MTF-LT-1, BMW 23007533513 MTF-LT-2, BMW 83220309031 MTF-LT-1, Fiat 14621616, Fiat 9.55550-MZ2, Fiat F178.B06, Ford 1382914, Ford 1547953, Ford WSS-M2C200-C3, Ford WSS-M2C200-D2, GM 1940711, GM 88861800, GM 88861801, Honda 08261-99964 Genuine MTF Fluid, Honda 08798-9031 MTF-7289, Hyundai 02200-00130 TOD, Land Rover STC 9157, Land Rover STC 9158, Land Rover TYK500030, MB 235.10 (A 001 989 26 03), MTF-94 Fluid für Land Rover, MG und Mini Cooper, Mitsubishi 3005401, Mitsubishi MZ312644, Nissan 999MP-MTF20P, Nissan KE91699932R, PSA B71 2330, Peugeot 9730A2, Subaru K0321-F0090, Toyota 08885-00705, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW/Audi G 052 911 A2, VW/Audi G 055 538 A2 für ZF 6S450 Amarok 0C6, Volvo 1161681, Volvo 1161745

Power steering

RAVENOL PSF-Y Fluid

RAVENOL PSF-Y Fluid

For power steering

RAVENOL PSF-Y Fluid is a synthetic Special Fluid, designed on the basis of high quality hydrocrack oils with a special additive and inhibition, which ensure a perfect function of the power steering.

Compliance with the requirements:
Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), MB 236.3, VW G 009 300, VW TL 4634

Buy Online
Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211123-001
1211123-001-01-999

Code:
4014835718616

Volume:
4 L

Vendor code:
1211123-004
 

Volume:
20 L

Vendor code:
1211123-020
 

Volume:
20 L, ecobox

Vendor code:
1211123-B20
1211123-B20-01-888

Code:
4014835786523

Volume:
60 L

Vendor code:
1211123-060
 

Volume:
60 L, print

Vendor code:
1211123-D60
 

Volume:
208 L

Vendor code:
1211123-208
 

Volume:
208 L, print

Vendor code:
1211123-D28
 

Due to its special formulation the properties of RAVENOL PSF-Y Fluid are crucial. We assure an excellent cold stability.

Application instructions

RAVENOL PSF-Y Fluid is specially designed for use in the latest power steering of Volkswagen, Mercedes and Chrysler. Please note: Follow manufacturer’s original equipment number!

Characteristics

  • Extremely low pour point
  • Improved viscosity and coefficient of friction behaviour
  • A very good protection against consumption
  • Excellent thermal stability
  • Improved EP-characteristics
  • A good foaming behaviour
  • Neutral behaviour towards sealing materials
  • Reliable protection against corrosion
Parameter Unit Value Tests
Type Synthetic
Synthetic
Recomendations Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), MB 236.3, VW G 009 300, VW TL 4634
Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), MB 236.3, VW G 009 300, VW TL 4634
Density at 20 °C g/cm³ 849 EN ISO 12185
849 g/cm³ EN ISO 12185
Color Yellow visual
Yellow visual
Viscosity at 100 °C mm²/s 7.2 DIN 51562-1
7.2 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 34.9 DIN 51562-1
34.9 mm²/s DIN 51562-1
Viscosity Index VI 177 DIN ISO 2909
177 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 12800 ASTM D2983
12800 mPa*s ASTM D2983
Approvals Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), MB 236.3, VW G 009 300, VW TL 4634
Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), MB 236.3, VW G 009 300, VW TL 4634
Recommendations Chrysler 04883077, Chrysler 05098158A, Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), GM 1050017, GM 89020661, GM 9985010, Honda 08206-9002, Honda 08285-P99-01Z-T1, MB 236.3, Mercedes A 000 989 88 03, Mopar 05142893AA, Texaco TL 4634, VW G 009 300 A2
Chrysler 04883077, Chrysler 05098158A, Chrysler MS-10838, Chrysler MS-5931, Chrysler MS-9933, DTFR 38B100 (MB 236.3), GM 1050017, GM 89020661, GM 9985010, Honda 08206-9002, Honda 08285-P99-01Z-T1, MB 236.3, Mercedes A 000 989 88 03, Mopar 05142893AA, Texaco TL 4634, VW G 009 300 A2

Hydraulic brake system

RAVENOL DOT 4

RAVENOL DOT 4

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
250 ml

Vendor code:
1350611-250
1350611-250-05-555

Code:
4014835903739

Volume:
1 L

Vendor code:
1350611-001
1350611-001-01-555

Code:
4014835903760

Volume:
20 L

Vendor code:
1350611-020
 

Volume:
500 ml

Vendor code:
1350611-500
1350611-500-05-555

Code:
4014835903821

Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J 1704, ISO 4925 and the safety regulations FMVSS 116 DOT 3 and DOT 4 from the United States of America are exceeded.

Application instructions

RAVENOL DOT can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.

RAVENOL DOT is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT , a complete change of the brake fluid is recommended.

RAVENOL DOT is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • optimum ABS characteristics
  • chemical stability
  • best lubrication efficiency
  • neutral behaviour regarding brake parts
  • low viscosity at low temperatures
  • miscible with all brake fluids of the same specifications
Parameter Unit Value Tests
Type Synthetic
Synthetic
specification DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704
Density at 20 °C g/cm³ 1052 EN ISO 12185
1052 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mPa*s 2.41 ASTM D445
2.41 mPa*s ASTM D445
Viscosity at -40 °C cSt 1340 ASTM D445
1340 cSt ASTM D445
Wet Equilibrium Reflux Boiling Point °C 169 FMVSS 116
169 °C FMVSS 116
High Temperature Stability °C -1 FMVSS 116
-1 °C FMVSS 116
Chemical Stability °C 1 FMVSS 116
1 °C FMVSS 116
Evaporation %w/w 61 FMVSS 116
61 %w/w FMVSS 116
Fluidity & Appearance at -40 °C i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
Fluidity & Appearance at -50 °C i.O., 8s FMVSS 116
i.O., 8s FMVSS 116
Water Tolerance at -40 °C transparent, 3s FMVSS 116
transparent, 3s FMVSS 116
Water Tolerance at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at -40 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Tinned Iron Δ mg/cm² 0.04 FMVSS 116
0.04 Δ mg/cm² FMVSS 116
Steel mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Aluminium mg/cm² 0.02 FMVSS 116
0.02 mg/cm² FMVSS 116
Cast Iron Δ mg/cm² -0,03 FMVSS 116
-0,03 Δ mg/cm² FMVSS 116
Brass mg/cm² -0.08 FMVSS 116
-0.08 mg/cm² FMVSS 116
Copper mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Zinc mg/cm² 0.01 FMVSS 116
0.01 mg/cm² FMVSS 116
Rubber Diameter Change 0.16 FMVSS 116
0.16 FMVSS 116
Hardness Change °IRHD -4 FMVSS 116
-4 °IRHD FMVSS 116
Appearance i.O. FMVSS 116
i.O. FMVSS 116
SBR at 70 °C mm 0.56 FMVSS 116
0.56 mm FMVSS 116
SBR at 120 °C mm 0.73 FMVSS 116
0.73 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703) IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
EPDM at 120 °C IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925) mm 0.38 FMVSS 116
0.38 mm FMVSS 116
Approvals DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704

Cooling system

Liquid volume (basic): 5.1 L
RAVENOL HTC Premix -40°C Protect MB 325.0

RAVENOL HTC Premix -40°C Protect MB 325.0

Coolant

RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a ready-to-use, prediluted with water, eco-friendly, 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free, all-season coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.

Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1.5 L

Vendor code:
1410121-150
1410121-150-01-999

Code:
4014835755710

Volume:
5 L

Vendor code:
1410121-005
1410121-005-01-999

Code:
4014835755758

Volume:
10 L

Vendor code:
1410121-010
 

Volume:
20 L

Vendor code:
1410121-020
1410121-020-01-999

Code:
4014835755727

Volume:
20 L, ecobox

Vendor code:
1410121-B20
1410121-B20-01-888

Code:
4014835855403

Volume:
60 L

Vendor code:
1410121-060
1410121-060-01-999

Code:
4014835755765

Volume:
208 L

Vendor code:
1410121-208
1410121-208-01-999

Code:
4014835755789

The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.

That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.

RAVENOL HTC Hybrid Technology Coolant Premix -40°C protects the cooling system from rust, frost, and in summer, from overheating.

Application instructions

RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a prediluted coolant with frost and rust protection for year-round use in automotive engines.

Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.

Instructions: Add RAVENOL HTC Hybrid Technology Coolant Premix -40°C to radiator to fill line.

RAVENOL HTC Hybrid Technology Coolant Premix -40°C can also be used as a “ready for use” dilution in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).

RAVENOL HTC Hybrid Technology Coolant Concentrate is included in the list of recommendations of the LaWa for water management requirements for geothermal probes and geothermal collectors.

Characteristics

  • Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium andcopper alloy radiators
  • Good reserve alkalinity
  • Protection from corrosion and cavitation
  • Prevents sediments and foaming in the cooling system
  • Compatible with elastomers used in automotive radiators
Parameter Unit Value Tests
ASTM D3306, D4340, D4985
D3306, D4340, D4985
Recomendations DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Suitable for DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
Density at 20 °C g/cm³ 1080 EN ISO 12185
1080 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
pH - value at 20 °C 7,5 ASTM D1287
7,5 ASTM D1287
Freezing point °C -40 ASTM D1177
-40 °C ASTM D1177
Approvals DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Recommendations ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
RAVENOL HTC Concentrate Protect MB 325.0

RAVENOL HTC Concentrate Protect MB 325.0

Coolant

RAVENOL HTC Hybrid Technology Coolant Concentrate is an all-season, eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.

Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1.5 L

Vendor code:
1410120-150
1410120-150-01-999

Code:
4014835755611

Volume:
5 L

Vendor code:
1410120-005
1410120-005-01-999

Code:
4014835755659

Volume:
10 L

Vendor code:
1410120-010
 

Volume:
20 L

Vendor code:
1410120-020
1410120-020-01-999

Code:
4014835755628

Volume:
20 L, ecobox

Vendor code:
1410120-B20
1410120-B20-01-888

Code:
4014835852730

Volume:
60 L

Vendor code:
1410120-060
1410120-060-01-999

Code:
4014835755666

Volume:
208 L

Vendor code:
1410120-208
1410120-208-01-999

Code:
4014835755680

Volume:
1000 L

Vendor code:
1410120-700
 

The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.

That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.

RAVENOL HTC Hybrid Technology Coolant Concentrate protects the cooling system from rust, frost, and in summer, from overheating.

Application instructions

RAVENOL HTC Hybrid Technology Coolant Concentrate with frost and rust protection for year-round use in automotive engines. Mix according to chart. Follow manufacturer's recommendations.

Instructions: Clean cooling system, check for leaks, flush.

Mix RAVENOL HTC Hybrid Technology Coolant Concentrate with distilled water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.

RAVENOL HTC Hybrid Technology Coolant Concentrate can also be used in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).

Table of mixing ratios
Antifreeze protection until Parts Antifreeze Parts Water
-20°C 35% 65%
-37°C 50% 50%
-50°C 60% 40%

Characteristics

  • Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium and copper alloy radiators
  • Excellent reserve alkalinity
  • Protection from corrosion and cavitation
  • Prevents sediments and foaming in the cooling system
  • Compatible with elastomers used in automotive radiators
Parameter Unit Value Tests
ASTM D3306, D4340, D4985
D3306, D4340, D4985
Recomendations DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Suitable for DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
Density at 20 °C g/cm³ 1130 EN ISO 12185
1130 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Freezing point (50 % solution) °C -37 ASTM D1177
-37 °C ASTM D1177
pH - value at 20 °C (50 Vol %) 7,0 - 8,0 ASTM D1287
7,0 - 8,0 ASTM D1287
Approvals DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Recommendations ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
RAVENOL destilliertes Wasser

RAVENOL destilliertes Wasser

For batteries

RAVENOL destilliertes Wasser is deionised distilled water and is manufactured using the ion exchangerprocess.

Compliance with the requirements:
DIN 43530-4, DIN EN 50272

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1360010-001
1360010-001-01-000

Code:
4014835300453

Volume:
5 L

Vendor code:
1360010-005
1360010-005-01-000

Code:
4014835300507

Volume:
5 L, specialist. canister

Vendor code:
1360010-005
1360010-005-01-001

Code:
4014835300514

Volume:
208 L

Vendor code:
1360010-208
 

Volume:
1000 L

Vendor code:
1360010-700
 

Volume:
20 L

Vendor code:
1360010-020
1360010-020-01-001

Code:
4014835300422

In the course of this process, the water flows through a column filled with ion exchange resin. This has theability to exchange its accumulated ions for the ions present in the water.

As the ion exchange resin cannot accumulate an infinite number of ions, they have to be “revived”, i.e. theyhave to be regenerated. This takes place using the currently most commonly used regeneration agents: sodiumchloride (water softening), hydrochloric acid (cation exchange) and sodium hydroxide (anion exchange).The conductivity of the water flowing through is constantly checked in a fully automated process and the ionexchanger unit regulates itself automatically.

RAVENOL destilliertes Wasser deionised water is regularly checked by taking samples.

Application instructions

RAVENOL destilliertes Wasser is ideally suited to filling up vehicle batteries and for steam irons and aquariums (to reduce the hardness of the water).

Parameter Unit Value Tests
Recomendations DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272
Approvals DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272
Recommendations DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
RAVENOL Professional Radiator Cleaner

RAVENOL Professional Radiator Cleaner

Additive

RAVENOL Professional Radiator Cleaner is a radiator cleaning additive, which is used for the quick and easy cleaning of the cooling and heating system.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
0.25 L

Vendor code:
1390302-250
1390302-250-05-000

Code:
4014835802667

RAVENOL Professional Radiator Cleaner breaks down and binds greasy and oily deposits in radiators, heating systems and pipelines.

RAVENOL Professional Radiator Cleaner infiltrates and eliminates sludge and corrosion deposits.RAVENOL Professional Radiator Stop Cleaner neutralises lime residue.

Application instructions

RAVENOL Professional Radiator Cleaner is added to the radiator. It is recommended to replace rubber parts affected by oil seepage.

Area of application:

Radiator repairs

In the event of reduced radiator performance

In the event of deposits in the cooling system

Changing coolant

For cleaning purposes after engine repairs due to oil in the cooling system

Application: RAVENOL Professional Radiator Cleaner suffices for up to 10 litres of coolant.

Fill in

RAVENOL Professional Radiator Cleanerin the used coolant and allow the engine to run at operating temperature for approx. 30 minutes. Drain contaminated mixture – in the case of severe contamination, repeat treatment if necessary. Rinse cooling system with clear water. Refill and remove air after cleaning the cooling system and check for leak tightness.

RAVENOL Professional Radiator Cleaner can lead to an improved cooling performance after repairs on the cooling system.

Characteristics

  • Cleaning of the cooling and heating system
  • Protection of the new coolant against prior contamination
  • Elimination of sludge and corrosion residue
Parameter Unit Value Tests
pH - value at 20 °C 10,25 DIN 19268
10,25 DIN 19268
Density at 20 °C g/cm³ 1003 EN ISO 12185
1003 g/cm³ EN ISO 12185
Color Colorless visual
Colorless visual

Recognizing the number...