ZEEKR 001

Oil for ZEEKR, 001, 001 RWD / 2WD

ZEEKR Model (001) to find out what kind of oil is used for it

ZEEKR 001 001 RWD / 2WDfrom 2021 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Fuel: Electric
Drive: Rear wheel drive
Power:

Rear electric drive Nidec TZ184XY180 c 2021-2023

Liquid volume (basic): 1.6 L
Hydraulic fluid

RAVENOL ATF DEXRON VI is an automatic transmission oil ATF on the basis of the latest technology of the HC/HT hydrocrack oils which is approved by General Motors for the use in vehicles with automatic transmissions. Because of the special formulation the durability is twice the time as a comparable ATF oil.

Manufacturer Approved:
GM J-60331, MB-Approval 236.41

Compliance with the requirements:
GMN 10060

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211105-001
1211105-001-01-999

Volume:
4 L

Vendor code:
1211105-004
1211105-004-01-999

Volume:
10 L

Vendor code:
1211105-010
1211105-010-01-999

Volume:
20 L

Vendor code:
1211105-020
1211105-020-01-999

Volume:
20 L, ecobox

Vendor code:
1211105-B20
1211105-B20-01-888

Volume:
60 L

Vendor code:
1211105-060
 

Volume:
60 L, print

Vendor code:
1211105-D60
1211105-D60-01-888

Volume:
208 L

Vendor code:
1211105-208
1211105-208-01-999

Volume:
208 L, print

Vendor code:
1211105-D28
1211105-D28-01-888

Volume:
1000 L

Vendor code:
1211105-700
1211105-700-01-999

RAVENOL ATF DEXRON VI fulfils the transmission oil specifications of General Motors for all vehicles with hydramatic – automatic transmissions from 2006. Dexron®-VI is a registered brand name of General Motors Corporation.

Application instructions

RAVENOL ATF DEXRON VI is recommended for all GM vehicles with hydramatic – automatic transmissions from 2006.

RAVENOL ATF DEXRON VI is completely downward compatible with DEXRON III (H)-, III- and IIE-applications. Follow the recommendations of the instruction manual of your vehicle.

Characteristics

  • phenomenal resistance of lubricant failure under hard operating conditions
  • a longer oil durability, extension of the durability of the transmission, offers longer changing intervals
  • phenomenal resistance of oil sludge and deposit accumulation
  • much better oxidation resistance and thermic stability than DEXRON III (H) ATF
  • an excellent corrosion protection, a much better foaming resistance for a smooth switching operation as well
  • as a lower corrosion of the bearings, sleeves and gear wheels
  • an excellent flow behaviour at low temperatures
  • a constant switching operation performance, optimised friction characteristics
  • prevention of coupling grinding regarding modulation rotary conversion
  • a longer durability of oil and coupling, offers a smooth switching operation at low temperatures
  • much better fuel economy and torque transfer than DEXRON III (H) ATF
  • an improved shear stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Manufacturer Approved GM J-60331, MB-Approval 236.41
GM J-60331, MB-Approval 236.41
Recomendations GMN 10060
GMN 10060
specification GM Dexron® VI
GM Dexron® VI
Density at 20 °C g/cm³ 838 EN ISO 12185
838 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 6 DIN 51562-1
6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 29.1 DIN 51562-1
29.1 mm²/s DIN 51562-1
Viscosity Index VI 158 DIN ISO 2909
158 DIN ISO 2909
tbn mgKOH/g 2 ASTM D2896
2 mgKOH/g ASTM D2896
Approvals GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
Recommendations BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
ATF Dexron VI
Dexron VI
RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.

Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2

Show more Hide details

SAE:  70W-80

API:  GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221112-001
1221112-001-01-999

Code:
4014835883147

Volume:
4 L

Vendor code:
1221112-004
1221112-004-01-999

Code:
4014835883178

Volume:
10 L

Vendor code:
1221112-010
1221112-010-01-999

Code:
4014835883208

Volume:
20 L

Vendor code:
1221112-020
 

Volume:
20 L, ecobox

Vendor code:
1221112-B20
1221112-B20-01-888

Code:
4014835883291

Volume:
60 L

Vendor code:
1221112-060
 

Volume:
208 L

Vendor code:
1221112-208
 

RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.

RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.

Application instructions

RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.

Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!

Characteristics

  • Outstanding cold flow properties
  • Good wear protection protects the gearbox
  • Excellent resistance to aging
  • Extremely low pour point
  • High viscosity stability
  • Reduces running noise
Parameter Unit Value Tests
SAE 70W-80
70W-80
Type Full synthetic
Full synthetic
API GL-5, MT-1
GL-5, MT-1
Recomendations BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
specification MIL-L-2105 D
MIL-L-2105 D
Density at 20 °C 848 EN ISO 12185
848 EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.27 DIN 51562-1
9.27 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.47 DIN 51562-1
50.47 mm²/s DIN 51562-1
Viscosity Index VI 169 DIN ISO 2909
169 DIN ISO 2909
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 10/0 ASTM D892
10/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Corrosion (24h/120 °C) 1a ASTM D130
1a ASTM D130
Approvals BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Tendency to foam (Seq. I, II, III) . DIN EN 60243-1 (20°C)
. DIN EN 60243-1 (20°C)
Recommendations BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Brookfield Viscosity at -55 °C mPa*s 109400 ASTM D2983
109400 mPa*s ASTM D2983
RAVENOL EV-Synto Extra Fluid 70W E-TF

RAVENOL EV-Synto Extra Fluid 70W E-TF

EV-Synto

RAVENOL EV-Synto Extra Fluid 70W E-TF is a full synthetic oil that has been specially developed for the requirements of modern electric vehicles. Selected additives ensure good electrical resistance and dielectric properties.

Compliance with the requirements:
BOT 805C EV, VW G 053 013 M2

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1215101-001
1215101-001-01-999

Code:
4014835891135

Volume:
4 L

Vendor code:
1215101-004
1215101-004-01-999

Code:
4014835891166

Volume:
10 L

Vendor code:
1215101-010
1215101-010-01-999

Code:
4014835891197

Volume:
1000 L

Vendor code:
1215101-700
 

Volume:
20 L

Vendor code:
1215101-020
1215101-020-01-999

Code:
4014835891296

Volume:
20 L, ecobox

Vendor code:
1215101-B20
1215101-B20-01-888

Code:
4014835891265

Volume:
60 L

Vendor code:
1215101-060
1215101-060-01-999

Code:
4014835891210

Volume:
208 L

Vendor code:
1215101-208
1215101-208-01-999

Code:
4014835891234

The special formulation reduces the energy requirement and at the same time protects the electrical components in the drive train. RAVENOL EV-Synto Extra Fluid 70W E-TF minimizes friction and wear and thus ensures a long service life of the vehicle. It lubricates and cools the various components of electric vehicles.

Application instructions

RAVENOL EV-Synto Extra Fluid 70W E-TF is ideally suited for year-round use in all modern electric vehicles. The special additives meet the requirements of many OEMs.

Developed for:

Reduction gearboxes in dry and wet engine systems from: Honda, BMW (i-Line), Mini, Mitsubishi, Fiat, Hyundai, Dong Feng, Geely, Chery, Kia, Tesla, Volvo, VW, Nio, Lotus, Rimac, Rivian, Polestar (Manufacturer's instructions must be followed)

(Follow the manufacturer's instructions)

First flush the transmission with

RAVENOL EV-Synto Extra Fluid 70W E-TF and then fill it with fresh oil. Follow the manufacturer's instructions!

Characteristics

  • Dielectric properties
  • Good electrical resistance
  • High wear protection
  • Excellent material compatibility
  • Very good corrosion protection
  • Long service life due to high oxidation stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Recomendations BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Density at 20 °C g/cm³ 844 EN ISO 12185
844 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 5.6 DIN 51562-1
5.6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 23 DIN 51562-1
23 mm²/s DIN 51562-1
Viscosity Index VI 196 DIN ISO 2909
196 DIN ISO 2909
Approvals BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Low Temperature Pumping Viscosity (MRV) at -55°C mPa*s 19.400 ASTM D2983
19.400 mPa*s ASTM D2983
Thermal conductivity at 0 °C mW/m∙K 147.2 ASTM D7896
147.2 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 142.4 ASTM D7896
142.4 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 136 ASTM D7896
136 mW/m∙K ASTM D7896
Thermal conductivity at 100 °C mW/m∙K 130.4 ASTM D7896
130.4 mW/m∙K ASTM D7896
Thermal conductivity at 140 °C mW/m∙K 125.9 ASTM D7896
125.9 mW/m∙K ASTM D7896
Specific conductivity at 0 °C nS/m 2.8 DIN EN 60247
2.8 nS/m DIN EN 60247
Specific conductivity at 20 °C nS/m 8.4 DIN EN 60247
8.4 nS/m DIN EN 60247
Specific conductivity at 80 °C nS/m 82.9 DIN EN 60247
82.9 nS/m DIN EN 60247
Specific conductivity at 140 °C nS/m 322.5 DIN EN 60247
322.5 nS/m DIN EN 60247
Specific heat capacity at 0 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 20 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 60 °C J/g∙K 2.1 ASTM D7896
2.1 J/g∙K ASTM D7896
Specific heat capacity at 100 °C J/g∙K 2.2 ASTM D7896
2.2 J/g∙K ASTM D7896
Specific heat capacity at 140 °C J/g∙K 2.4 ASTM D7896
2.4 J/g∙K ASTM D7896
Breakdown voltage kV 55,5 IEC 60156
55,5 kV IEC 60156
Recommendations BOT 805C EV, ON EV W1, VW G 053 013 M2
BOT 805C EV, ON EV W1, VW G 053 013 M2

Rear electric drive Wei Rui TZ220XSA01 / TZ220XSA02 c 2021-2023

Liquid volume (basic): 0.9 L
Hydraulic fluid

RAVENOL ATF DEXRON VI is an automatic transmission oil ATF on the basis of the latest technology of the HC/HT hydrocrack oils which is approved by General Motors for the use in vehicles with automatic transmissions. Because of the special formulation the durability is twice the time as a comparable ATF oil.

Manufacturer Approved:
GM J-60331, MB-Approval 236.41

Compliance with the requirements:
GMN 10060

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211105-001
1211105-001-01-999

Volume:
4 L

Vendor code:
1211105-004
1211105-004-01-999

Volume:
10 L

Vendor code:
1211105-010
1211105-010-01-999

Volume:
20 L

Vendor code:
1211105-020
1211105-020-01-999

Volume:
20 L, ecobox

Vendor code:
1211105-B20
1211105-B20-01-888

Volume:
60 L

Vendor code:
1211105-060
 

Volume:
60 L, print

Vendor code:
1211105-D60
1211105-D60-01-888

Volume:
208 L

Vendor code:
1211105-208
1211105-208-01-999

Volume:
208 L, print

Vendor code:
1211105-D28
1211105-D28-01-888

Volume:
1000 L

Vendor code:
1211105-700
1211105-700-01-999

RAVENOL ATF DEXRON VI fulfils the transmission oil specifications of General Motors for all vehicles with hydramatic – automatic transmissions from 2006. Dexron®-VI is a registered brand name of General Motors Corporation.

Application instructions

RAVENOL ATF DEXRON VI is recommended for all GM vehicles with hydramatic – automatic transmissions from 2006.

RAVENOL ATF DEXRON VI is completely downward compatible with DEXRON III (H)-, III- and IIE-applications. Follow the recommendations of the instruction manual of your vehicle.

Characteristics

  • phenomenal resistance of lubricant failure under hard operating conditions
  • a longer oil durability, extension of the durability of the transmission, offers longer changing intervals
  • phenomenal resistance of oil sludge and deposit accumulation
  • much better oxidation resistance and thermic stability than DEXRON III (H) ATF
  • an excellent corrosion protection, a much better foaming resistance for a smooth switching operation as well
  • as a lower corrosion of the bearings, sleeves and gear wheels
  • an excellent flow behaviour at low temperatures
  • a constant switching operation performance, optimised friction characteristics
  • prevention of coupling grinding regarding modulation rotary conversion
  • a longer durability of oil and coupling, offers a smooth switching operation at low temperatures
  • much better fuel economy and torque transfer than DEXRON III (H) ATF
  • an improved shear stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Manufacturer Approved GM J-60331, MB-Approval 236.41
GM J-60331, MB-Approval 236.41
Recomendations GMN 10060
GMN 10060
specification GM Dexron® VI
GM Dexron® VI
Density at 20 °C g/cm³ 838 EN ISO 12185
838 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 6 DIN 51562-1
6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 29.1 DIN 51562-1
29.1 mm²/s DIN 51562-1
Viscosity Index VI 158 DIN ISO 2909
158 DIN ISO 2909
tbn mgKOH/g 2 ASTM D2896
2 mgKOH/g ASTM D2896
Approvals GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
Recommendations BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
ATF Dexron VI
Dexron VI
RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.

Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2

Show more Hide details

SAE:  70W-80

API:  GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221112-001
1221112-001-01-999

Code:
4014835883147

Volume:
4 L

Vendor code:
1221112-004
1221112-004-01-999

Code:
4014835883178

Volume:
10 L

Vendor code:
1221112-010
1221112-010-01-999

Code:
4014835883208

Volume:
20 L

Vendor code:
1221112-020
 

Volume:
20 L, ecobox

Vendor code:
1221112-B20
1221112-B20-01-888

Code:
4014835883291

Volume:
60 L

Vendor code:
1221112-060
 

Volume:
208 L

Vendor code:
1221112-208
 

RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.

RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.

Application instructions

RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.

Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!

Characteristics

  • Outstanding cold flow properties
  • Good wear protection protects the gearbox
  • Excellent resistance to aging
  • Extremely low pour point
  • High viscosity stability
  • Reduces running noise
Parameter Unit Value Tests
SAE 70W-80
70W-80
Type Full synthetic
Full synthetic
API GL-5, MT-1
GL-5, MT-1
Recomendations BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
specification MIL-L-2105 D
MIL-L-2105 D
Density at 20 °C 848 EN ISO 12185
848 EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.27 DIN 51562-1
9.27 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.47 DIN 51562-1
50.47 mm²/s DIN 51562-1
Viscosity Index VI 169 DIN ISO 2909
169 DIN ISO 2909
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 10/0 ASTM D892
10/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Corrosion (24h/120 °C) 1a ASTM D130
1a ASTM D130
Approvals BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Tendency to foam (Seq. I, II, III) . DIN EN 60243-1 (20°C)
. DIN EN 60243-1 (20°C)
Recommendations BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Brookfield Viscosity at -55 °C mPa*s 109400 ASTM D2983
109400 mPa*s ASTM D2983
RAVENOL EV-Synto Extra Fluid 70W E-TF

RAVENOL EV-Synto Extra Fluid 70W E-TF

EV-Synto

RAVENOL EV-Synto Extra Fluid 70W E-TF is a full synthetic oil that has been specially developed for the requirements of modern electric vehicles. Selected additives ensure good electrical resistance and dielectric properties.

Compliance with the requirements:
BOT 805C EV, VW G 053 013 M2

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1215101-001
1215101-001-01-999

Code:
4014835891135

Volume:
4 L

Vendor code:
1215101-004
1215101-004-01-999

Code:
4014835891166

Volume:
10 L

Vendor code:
1215101-010
1215101-010-01-999

Code:
4014835891197

Volume:
1000 L

Vendor code:
1215101-700
 

Volume:
20 L

Vendor code:
1215101-020
1215101-020-01-999

Code:
4014835891296

Volume:
20 L, ecobox

Vendor code:
1215101-B20
1215101-B20-01-888

Code:
4014835891265

Volume:
60 L

Vendor code:
1215101-060
1215101-060-01-999

Code:
4014835891210

Volume:
208 L

Vendor code:
1215101-208
1215101-208-01-999

Code:
4014835891234

The special formulation reduces the energy requirement and at the same time protects the electrical components in the drive train. RAVENOL EV-Synto Extra Fluid 70W E-TF minimizes friction and wear and thus ensures a long service life of the vehicle. It lubricates and cools the various components of electric vehicles.

Application instructions

RAVENOL EV-Synto Extra Fluid 70W E-TF is ideally suited for year-round use in all modern electric vehicles. The special additives meet the requirements of many OEMs.

Developed for:

Reduction gearboxes in dry and wet engine systems from: Honda, BMW (i-Line), Mini, Mitsubishi, Fiat, Hyundai, Dong Feng, Geely, Chery, Kia, Tesla, Volvo, VW, Nio, Lotus, Rimac, Rivian, Polestar (Manufacturer's instructions must be followed)

(Follow the manufacturer's instructions)

First flush the transmission with

RAVENOL EV-Synto Extra Fluid 70W E-TF and then fill it with fresh oil. Follow the manufacturer's instructions!

Characteristics

  • Dielectric properties
  • Good electrical resistance
  • High wear protection
  • Excellent material compatibility
  • Very good corrosion protection
  • Long service life due to high oxidation stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Recomendations BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Density at 20 °C g/cm³ 844 EN ISO 12185
844 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 5.6 DIN 51562-1
5.6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 23 DIN 51562-1
23 mm²/s DIN 51562-1
Viscosity Index VI 196 DIN ISO 2909
196 DIN ISO 2909
Approvals BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Low Temperature Pumping Viscosity (MRV) at -55°C mPa*s 19.400 ASTM D2983
19.400 mPa*s ASTM D2983
Thermal conductivity at 0 °C mW/m∙K 147.2 ASTM D7896
147.2 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 142.4 ASTM D7896
142.4 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 136 ASTM D7896
136 mW/m∙K ASTM D7896
Thermal conductivity at 100 °C mW/m∙K 130.4 ASTM D7896
130.4 mW/m∙K ASTM D7896
Thermal conductivity at 140 °C mW/m∙K 125.9 ASTM D7896
125.9 mW/m∙K ASTM D7896
Specific conductivity at 0 °C nS/m 2.8 DIN EN 60247
2.8 nS/m DIN EN 60247
Specific conductivity at 20 °C nS/m 8.4 DIN EN 60247
8.4 nS/m DIN EN 60247
Specific conductivity at 80 °C nS/m 82.9 DIN EN 60247
82.9 nS/m DIN EN 60247
Specific conductivity at 140 °C nS/m 322.5 DIN EN 60247
322.5 nS/m DIN EN 60247
Specific heat capacity at 0 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 20 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 60 °C J/g∙K 2.1 ASTM D7896
2.1 J/g∙K ASTM D7896
Specific heat capacity at 100 °C J/g∙K 2.2 ASTM D7896
2.2 J/g∙K ASTM D7896
Specific heat capacity at 140 °C J/g∙K 2.4 ASTM D7896
2.4 J/g∙K ASTM D7896
Breakdown voltage kV 55,5 IEC 60156
55,5 kV IEC 60156
Recommendations BOT 805C EV, ON EV W1, VW G 053 013 M2
BOT 805C EV, ON EV W1, VW G 053 013 M2

Rear electric drive Wei Rui TZ180XSB01 c 2021-2023

Liquid volume (basic): 0.7 L
Hydraulic fluid

RAVENOL ATF DEXRON VI is an automatic transmission oil ATF on the basis of the latest technology of the HC/HT hydrocrack oils which is approved by General Motors for the use in vehicles with automatic transmissions. Because of the special formulation the durability is twice the time as a comparable ATF oil.

Manufacturer Approved:
GM J-60331, MB-Approval 236.41

Compliance with the requirements:
GMN 10060

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211105-001
1211105-001-01-999

Volume:
4 L

Vendor code:
1211105-004
1211105-004-01-999

Volume:
10 L

Vendor code:
1211105-010
1211105-010-01-999

Volume:
20 L

Vendor code:
1211105-020
1211105-020-01-999

Volume:
20 L, ecobox

Vendor code:
1211105-B20
1211105-B20-01-888

Volume:
60 L

Vendor code:
1211105-060
 

Volume:
60 L, print

Vendor code:
1211105-D60
1211105-D60-01-888

Volume:
208 L

Vendor code:
1211105-208
1211105-208-01-999

Volume:
208 L, print

Vendor code:
1211105-D28
1211105-D28-01-888

Volume:
1000 L

Vendor code:
1211105-700
1211105-700-01-999

RAVENOL ATF DEXRON VI fulfils the transmission oil specifications of General Motors for all vehicles with hydramatic – automatic transmissions from 2006. Dexron®-VI is a registered brand name of General Motors Corporation.

Application instructions

RAVENOL ATF DEXRON VI is recommended for all GM vehicles with hydramatic – automatic transmissions from 2006.

RAVENOL ATF DEXRON VI is completely downward compatible with DEXRON III (H)-, III- and IIE-applications. Follow the recommendations of the instruction manual of your vehicle.

Characteristics

  • phenomenal resistance of lubricant failure under hard operating conditions
  • a longer oil durability, extension of the durability of the transmission, offers longer changing intervals
  • phenomenal resistance of oil sludge and deposit accumulation
  • much better oxidation resistance and thermic stability than DEXRON III (H) ATF
  • an excellent corrosion protection, a much better foaming resistance for a smooth switching operation as well
  • as a lower corrosion of the bearings, sleeves and gear wheels
  • an excellent flow behaviour at low temperatures
  • a constant switching operation performance, optimised friction characteristics
  • prevention of coupling grinding regarding modulation rotary conversion
  • a longer durability of oil and coupling, offers a smooth switching operation at low temperatures
  • much better fuel economy and torque transfer than DEXRON III (H) ATF
  • an improved shear stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Manufacturer Approved GM J-60331, MB-Approval 236.41
GM J-60331, MB-Approval 236.41
Recomendations GMN 10060
GMN 10060
specification GM Dexron® VI
GM Dexron® VI
Density at 20 °C g/cm³ 838 EN ISO 12185
838 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 6 DIN 51562-1
6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 29.1 DIN 51562-1
29.1 mm²/s DIN 51562-1
Viscosity Index VI 158 DIN ISO 2909
158 DIN ISO 2909
tbn mgKOH/g 2 ASTM D2896
2 mgKOH/g ASTM D2896
Approvals GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
Recommendations BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
ATF Dexron VI
Dexron VI
RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.

Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2

Show more Hide details

SAE:  70W-80

API:  GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221112-001
1221112-001-01-999

Code:
4014835883147

Volume:
4 L

Vendor code:
1221112-004
1221112-004-01-999

Code:
4014835883178

Volume:
10 L

Vendor code:
1221112-010
1221112-010-01-999

Code:
4014835883208

Volume:
20 L

Vendor code:
1221112-020
 

Volume:
20 L, ecobox

Vendor code:
1221112-B20
1221112-B20-01-888

Code:
4014835883291

Volume:
60 L

Vendor code:
1221112-060
 

Volume:
208 L

Vendor code:
1221112-208
 

RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.

RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.

Application instructions

RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.

Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!

Characteristics

  • Outstanding cold flow properties
  • Good wear protection protects the gearbox
  • Excellent resistance to aging
  • Extremely low pour point
  • High viscosity stability
  • Reduces running noise
Parameter Unit Value Tests
SAE 70W-80
70W-80
Type Full synthetic
Full synthetic
API GL-5, MT-1
GL-5, MT-1
Recomendations BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
specification MIL-L-2105 D
MIL-L-2105 D
Density at 20 °C 848 EN ISO 12185
848 EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.27 DIN 51562-1
9.27 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.47 DIN 51562-1
50.47 mm²/s DIN 51562-1
Viscosity Index VI 169 DIN ISO 2909
169 DIN ISO 2909
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 10/0 ASTM D892
10/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Corrosion (24h/120 °C) 1a ASTM D130
1a ASTM D130
Approvals BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Tendency to foam (Seq. I, II, III) . DIN EN 60243-1 (20°C)
. DIN EN 60243-1 (20°C)
Recommendations BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Brookfield Viscosity at -55 °C mPa*s 109400 ASTM D2983
109400 mPa*s ASTM D2983
RAVENOL EV-Synto Extra Fluid 70W E-TF

RAVENOL EV-Synto Extra Fluid 70W E-TF

EV-Synto

RAVENOL EV-Synto Extra Fluid 70W E-TF is a full synthetic oil that has been specially developed for the requirements of modern electric vehicles. Selected additives ensure good electrical resistance and dielectric properties.

Compliance with the requirements:
BOT 805C EV, VW G 053 013 M2

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1215101-001
1215101-001-01-999

Code:
4014835891135

Volume:
4 L

Vendor code:
1215101-004
1215101-004-01-999

Code:
4014835891166

Volume:
10 L

Vendor code:
1215101-010
1215101-010-01-999

Code:
4014835891197

Volume:
1000 L

Vendor code:
1215101-700
 

Volume:
20 L

Vendor code:
1215101-020
1215101-020-01-999

Code:
4014835891296

Volume:
20 L, ecobox

Vendor code:
1215101-B20
1215101-B20-01-888

Code:
4014835891265

Volume:
60 L

Vendor code:
1215101-060
1215101-060-01-999

Code:
4014835891210

Volume:
208 L

Vendor code:
1215101-208
1215101-208-01-999

Code:
4014835891234

The special formulation reduces the energy requirement and at the same time protects the electrical components in the drive train. RAVENOL EV-Synto Extra Fluid 70W E-TF minimizes friction and wear and thus ensures a long service life of the vehicle. It lubricates and cools the various components of electric vehicles.

Application instructions

RAVENOL EV-Synto Extra Fluid 70W E-TF is ideally suited for year-round use in all modern electric vehicles. The special additives meet the requirements of many OEMs.

Developed for:

Reduction gearboxes in dry and wet engine systems from: Honda, BMW (i-Line), Mini, Mitsubishi, Fiat, Hyundai, Dong Feng, Geely, Chery, Kia, Tesla, Volvo, VW, Nio, Lotus, Rimac, Rivian, Polestar (Manufacturer's instructions must be followed)

(Follow the manufacturer's instructions)

First flush the transmission with

RAVENOL EV-Synto Extra Fluid 70W E-TF and then fill it with fresh oil. Follow the manufacturer's instructions!

Characteristics

  • Dielectric properties
  • Good electrical resistance
  • High wear protection
  • Excellent material compatibility
  • Very good corrosion protection
  • Long service life due to high oxidation stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Recomendations BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Density at 20 °C g/cm³ 844 EN ISO 12185
844 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 5.6 DIN 51562-1
5.6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 23 DIN 51562-1
23 mm²/s DIN 51562-1
Viscosity Index VI 196 DIN ISO 2909
196 DIN ISO 2909
Approvals BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Low Temperature Pumping Viscosity (MRV) at -55°C mPa*s 19.400 ASTM D2983
19.400 mPa*s ASTM D2983
Thermal conductivity at 0 °C mW/m∙K 147.2 ASTM D7896
147.2 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 142.4 ASTM D7896
142.4 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 136 ASTM D7896
136 mW/m∙K ASTM D7896
Thermal conductivity at 100 °C mW/m∙K 130.4 ASTM D7896
130.4 mW/m∙K ASTM D7896
Thermal conductivity at 140 °C mW/m∙K 125.9 ASTM D7896
125.9 mW/m∙K ASTM D7896
Specific conductivity at 0 °C nS/m 2.8 DIN EN 60247
2.8 nS/m DIN EN 60247
Specific conductivity at 20 °C nS/m 8.4 DIN EN 60247
8.4 nS/m DIN EN 60247
Specific conductivity at 80 °C nS/m 82.9 DIN EN 60247
82.9 nS/m DIN EN 60247
Specific conductivity at 140 °C nS/m 322.5 DIN EN 60247
322.5 nS/m DIN EN 60247
Specific heat capacity at 0 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 20 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 60 °C J/g∙K 2.1 ASTM D7896
2.1 J/g∙K ASTM D7896
Specific heat capacity at 100 °C J/g∙K 2.2 ASTM D7896
2.2 J/g∙K ASTM D7896
Specific heat capacity at 140 °C J/g∙K 2.4 ASTM D7896
2.4 J/g∙K ASTM D7896
Breakdown voltage kV 55,5 IEC 60156
55,5 kV IEC 60156
Recommendations BOT 805C EV, ON EV W1, VW G 053 013 M2
BOT 805C EV, ON EV W1, VW G 053 013 M2

Rear electric drive Wei Rui 2023

Liquid volume (basic): 2.2 L
Hydraulic fluid

RAVENOL ATF DEXRON VI is an automatic transmission oil ATF on the basis of the latest technology of the HC/HT hydrocrack oils which is approved by General Motors for the use in vehicles with automatic transmissions. Because of the special formulation the durability is twice the time as a comparable ATF oil.

Manufacturer Approved:
GM J-60331, MB-Approval 236.41

Compliance with the requirements:
GMN 10060

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1211105-001
1211105-001-01-999

Volume:
4 L

Vendor code:
1211105-004
1211105-004-01-999

Volume:
10 L

Vendor code:
1211105-010
1211105-010-01-999

Volume:
20 L

Vendor code:
1211105-020
1211105-020-01-999

Volume:
20 L, ecobox

Vendor code:
1211105-B20
1211105-B20-01-888

Volume:
60 L

Vendor code:
1211105-060
 

Volume:
60 L, print

Vendor code:
1211105-D60
1211105-D60-01-888

Volume:
208 L

Vendor code:
1211105-208
1211105-208-01-999

Volume:
208 L, print

Vendor code:
1211105-D28
1211105-D28-01-888

Volume:
1000 L

Vendor code:
1211105-700
1211105-700-01-999

RAVENOL ATF DEXRON VI fulfils the transmission oil specifications of General Motors for all vehicles with hydramatic – automatic transmissions from 2006. Dexron®-VI is a registered brand name of General Motors Corporation.

Application instructions

RAVENOL ATF DEXRON VI is recommended for all GM vehicles with hydramatic – automatic transmissions from 2006.

RAVENOL ATF DEXRON VI is completely downward compatible with DEXRON III (H)-, III- and IIE-applications. Follow the recommendations of the instruction manual of your vehicle.

Characteristics

  • phenomenal resistance of lubricant failure under hard operating conditions
  • a longer oil durability, extension of the durability of the transmission, offers longer changing intervals
  • phenomenal resistance of oil sludge and deposit accumulation
  • much better oxidation resistance and thermic stability than DEXRON III (H) ATF
  • an excellent corrosion protection, a much better foaming resistance for a smooth switching operation as well
  • as a lower corrosion of the bearings, sleeves and gear wheels
  • an excellent flow behaviour at low temperatures
  • a constant switching operation performance, optimised friction characteristics
  • prevention of coupling grinding regarding modulation rotary conversion
  • a longer durability of oil and coupling, offers a smooth switching operation at low temperatures
  • much better fuel economy and torque transfer than DEXRON III (H) ATF
  • an improved shear stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Manufacturer Approved GM J-60331, MB-Approval 236.41
GM J-60331, MB-Approval 236.41
Recomendations GMN 10060
GMN 10060
specification GM Dexron® VI
GM Dexron® VI
Density at 20 °C g/cm³ 838 EN ISO 12185
838 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 6 DIN 51562-1
6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 29.1 DIN 51562-1
29.1 mm²/s DIN 51562-1
Viscosity Index VI 158 DIN ISO 2909
158 DIN ISO 2909
tbn mgKOH/g 2 ASTM D2896
2 mgKOH/g ASTM D2896
Approvals GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
GM Dexron® VI, GM J-60331, GMN 10060, MB 236.41
Recommendations BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
BMW 83220397114, BMW 83222167720, GM 1940184, GM 93165414, GMN 10060
ATF Dexron VI
Dexron VI
RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80

RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.

Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2

Show more Hide details

SAE:  70W-80

API:  GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221112-001
1221112-001-01-999

Code:
4014835883147

Volume:
4 L

Vendor code:
1221112-004
1221112-004-01-999

Code:
4014835883178

Volume:
10 L

Vendor code:
1221112-010
1221112-010-01-999

Code:
4014835883208

Volume:
20 L

Vendor code:
1221112-020
 

Volume:
20 L, ecobox

Vendor code:
1221112-B20
1221112-B20-01-888

Code:
4014835883291

Volume:
60 L

Vendor code:
1221112-060
 

Volume:
208 L

Vendor code:
1221112-208
 

RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.

RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.

Application instructions

RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.

Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!

Characteristics

  • Outstanding cold flow properties
  • Good wear protection protects the gearbox
  • Excellent resistance to aging
  • Extremely low pour point
  • High viscosity stability
  • Reduces running noise
Parameter Unit Value Tests
SAE 70W-80
70W-80
Type Full synthetic
Full synthetic
API GL-5, MT-1
GL-5, MT-1
Recomendations BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
specification MIL-L-2105 D
MIL-L-2105 D
Density at 20 °C 848 EN ISO 12185
848 EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.27 DIN 51562-1
9.27 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.47 DIN 51562-1
50.47 mm²/s DIN 51562-1
Viscosity Index VI 169 DIN ISO 2909
169 DIN ISO 2909
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 10/0 ASTM D892
10/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Corrosion (24h/120 °C) 1a ASTM D130
1a ASTM D130
Approvals BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Tendency to foam (Seq. I, II, III) . DIN EN 60243-1 (20°C)
. DIN EN 60243-1 (20°C)
Recommendations BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
Brookfield Viscosity at -55 °C mPa*s 109400 ASTM D2983
109400 mPa*s ASTM D2983
RAVENOL EV-Synto Extra Fluid 70W E-TF

RAVENOL EV-Synto Extra Fluid 70W E-TF

EV-Synto

RAVENOL EV-Synto Extra Fluid 70W E-TF is a full synthetic oil that has been specially developed for the requirements of modern electric vehicles. Selected additives ensure good electrical resistance and dielectric properties.

Compliance with the requirements:
BOT 805C EV, VW G 053 013 M2

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1215101-001
1215101-001-01-999

Code:
4014835891135

Volume:
4 L

Vendor code:
1215101-004
1215101-004-01-999

Code:
4014835891166

Volume:
10 L

Vendor code:
1215101-010
1215101-010-01-999

Code:
4014835891197

Volume:
1000 L

Vendor code:
1215101-700
 

Volume:
20 L

Vendor code:
1215101-020
1215101-020-01-999

Code:
4014835891296

Volume:
20 L, ecobox

Vendor code:
1215101-B20
1215101-B20-01-888

Code:
4014835891265

Volume:
60 L

Vendor code:
1215101-060
1215101-060-01-999

Code:
4014835891210

Volume:
208 L

Vendor code:
1215101-208
1215101-208-01-999

Code:
4014835891234

The special formulation reduces the energy requirement and at the same time protects the electrical components in the drive train. RAVENOL EV-Synto Extra Fluid 70W E-TF minimizes friction and wear and thus ensures a long service life of the vehicle. It lubricates and cools the various components of electric vehicles.

Application instructions

RAVENOL EV-Synto Extra Fluid 70W E-TF is ideally suited for year-round use in all modern electric vehicles. The special additives meet the requirements of many OEMs.

Developed for:

Reduction gearboxes in dry and wet engine systems from: Honda, BMW (i-Line), Mini, Mitsubishi, Fiat, Hyundai, Dong Feng, Geely, Chery, Kia, Tesla, Volvo, VW, Nio, Lotus, Rimac, Rivian, Polestar (Manufacturer's instructions must be followed)

(Follow the manufacturer's instructions)

First flush the transmission with

RAVENOL EV-Synto Extra Fluid 70W E-TF and then fill it with fresh oil. Follow the manufacturer's instructions!

Characteristics

  • Dielectric properties
  • Good electrical resistance
  • High wear protection
  • Excellent material compatibility
  • Very good corrosion protection
  • Long service life due to high oxidation stability
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
Recomendations BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Density at 20 °C g/cm³ 844 EN ISO 12185
844 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 5.6 DIN 51562-1
5.6 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 23 DIN 51562-1
23 mm²/s DIN 51562-1
Viscosity Index VI 196 DIN ISO 2909
196 DIN ISO 2909
Approvals BOT 805C EV, VW G 053 013 M2
BOT 805C EV, VW G 053 013 M2
Low Temperature Pumping Viscosity (MRV) at -55°C mPa*s 19.400 ASTM D2983
19.400 mPa*s ASTM D2983
Thermal conductivity at 0 °C mW/m∙K 147.2 ASTM D7896
147.2 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 142.4 ASTM D7896
142.4 mW/m∙K ASTM D7896
Thermal conductivity at 60 °C mW/m∙K 136 ASTM D7896
136 mW/m∙K ASTM D7896
Thermal conductivity at 100 °C mW/m∙K 130.4 ASTM D7896
130.4 mW/m∙K ASTM D7896
Thermal conductivity at 140 °C mW/m∙K 125.9 ASTM D7896
125.9 mW/m∙K ASTM D7896
Specific conductivity at 0 °C nS/m 2.8 DIN EN 60247
2.8 nS/m DIN EN 60247
Specific conductivity at 20 °C nS/m 8.4 DIN EN 60247
8.4 nS/m DIN EN 60247
Specific conductivity at 80 °C nS/m 82.9 DIN EN 60247
82.9 nS/m DIN EN 60247
Specific conductivity at 140 °C nS/m 322.5 DIN EN 60247
322.5 nS/m DIN EN 60247
Specific heat capacity at 0 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 20 °C J/g∙K 1.9 ASTM D7896
1.9 J/g∙K ASTM D7896
Specific heat capacity at 60 °C J/g∙K 2.1 ASTM D7896
2.1 J/g∙K ASTM D7896
Specific heat capacity at 100 °C J/g∙K 2.2 ASTM D7896
2.2 J/g∙K ASTM D7896
Specific heat capacity at 140 °C J/g∙K 2.4 ASTM D7896
2.4 J/g∙K ASTM D7896
Breakdown voltage kV 55,5 IEC 60156
55,5 kV IEC 60156
Recommendations BOT 805C EV, ON EV W1, VW G 053 013 M2
BOT 805C EV, ON EV W1, VW G 053 013 M2

Hydraulic brake system

Liquid volume (basic): 1 L
RAVENOL DOT 4 LV

RAVENOL DOT 4 LV

RAVENOL DOT 4 LV is a very high specification Brake and Clutch Fluid which conforms to and exceeds the latest ISO 4925 Class 6 standard.

Compliance with the requirements:
Ford WSS-M6C 65-A2, VW 501.14

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
20 L

Vendor code:
1350615-020
 

Volume:
1 L

Vendor code:
1350615-001
1350615-001-01-555

Code:
4014835903944

The specific formulation of RAVENOL DOT 4 LV also meets current international specifications US FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and ISO 4925 (Classes 3 & 4).

With its exceptional viscosity performance even at extremely Low Viskosity (max. 750 cSt @ -40°C) RAVENOL DOT 4 LV is especially recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 4 LV even at low temperatures.

RAVENOL DOT 4 LV mixes safely with other brake and clutch fluids that meet the above specifications.

Application instructions

RAVENOL DOT 4 LV brake fluid can be used in all vehicles where ISO 4925 Class 6 specification is required.

RAVENOL DOT 4 LV is recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.

RAVENOL DOT 4 LV is also recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based fluid of this type is specified.

RAVENOL DOT 4 LV brake fluid is miscible with all known brake fluids of the same specification.

To use the high performance level of RAVENOL DOT 4 LV, a complete change of the brake fluid is recommended.

RAVENOL DOT 4 LV is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113)Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • Fluidity even at very low temperatures
  • Optimal ABS properties.
  • Chemical stability.
  • High lubricating power
  • Neutral behavior towards brake parts.
  • Can be mixed with all brake fluids of the same specification.
Parameter Unit Value Tests
Type Synthetic
Synthetic
Recomendations Ford WSS-M6C 65-A2, VW 501.14
Ford WSS-M6C 65-A2, VW 501.14
specification DOT 3, DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704
DOT 3, DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704
Density at 20 °C g/cm³ 1052 EN ISO 12185
1052 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mPa*s 2.1 ASTM D445
2.1 mPa*s ASTM D445
Viscosity at -40 °C cSt 675 ASTM D445
675 cSt ASTM D445
Wet Equilibrium Reflux Boiling Point °C 172 FMVSS 116
172 °C FMVSS 116
High Temperature Stability °C -1 FMVSS 116
-1 °C FMVSS 116
Chemical Stability °C 1 FMVSS 116
1 °C FMVSS 116
Evaporation %w/w 61 FMVSS 116
61 %w/w FMVSS 116
Fluidity & Appearance at -40 °C i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
Fluidity & Appearance at -50 °C i.O., 8s FMVSS 116
i.O., 8s FMVSS 116
Water Tolerance at -40 °C transparent, 3s FMVSS 116
transparent, 3s FMVSS 116
Water Tolerance at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at -40 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Tinned Iron Δ mg/cm² 0.04 FMVSS 116
0.04 Δ mg/cm² FMVSS 116
Steel mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Aluminium mg/cm² 0.02 FMVSS 116
0.02 mg/cm² FMVSS 116
Cast Iron Δ mg/cm² -0,03 FMVSS 116
-0,03 Δ mg/cm² FMVSS 116
Brass mg/cm² -0.08 FMVSS 116
-0.08 mg/cm² FMVSS 116
Copper mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Zinc mg/cm² 0.01 FMVSS 116
0.01 mg/cm² FMVSS 116
Rubber Diameter Change 0.16 FMVSS 116
0.16 FMVSS 116
Hardness Change °IRHD -4 FMVSS 116
-4 °IRHD FMVSS 116
Appearance i.O. FMVSS 116
i.O. FMVSS 116
SBR at 70 °C mm 0.56 FMVSS 116
0.56 mm FMVSS 116
SBR at 120 °C mm 0.73 FMVSS 116
0.73 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703) IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
EPDM at 120 °C IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925) mm 0.38 FMVSS 116
0.38 mm FMVSS 116
Approvals DOT 3, DOT 4, Ford WSS-M6C 65-A2, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704, VW 501.14
DOT 3, DOT 4, Ford WSS-M6C 65-A2, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704, VW 501.14
Recommendations Ford WSS-M6C65-A2, VW 501 14
Ford WSS-M6C65-A2, VW 501 14

Cooling system

Liquid volume (basic): 20 L
RAVENOL HTC Premix -40°C Protect MB 325.0

RAVENOL HTC Premix -40°C Protect MB 325.0

Coolant

RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a ready-to-use, prediluted with water, eco-friendly, 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free, all-season coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.

Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1.5 L

Vendor code:
1410121-150
1410121-150-01-999

Code:
4014835755710

Volume:
5 L

Vendor code:
1410121-005
1410121-005-01-999

Code:
4014835755758

Volume:
10 L

Vendor code:
1410121-010
 

Volume:
20 L

Vendor code:
1410121-020
1410121-020-01-999

Code:
4014835755727

Volume:
20 L, ecobox

Vendor code:
1410121-B20
1410121-B20-01-888

Code:
4014835855403

Volume:
60 L

Vendor code:
1410121-060
1410121-060-01-999

Code:
4014835755765

Volume:
208 L

Vendor code:
1410121-208
1410121-208-01-999

Code:
4014835755789

The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.

That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.

RAVENOL HTC Hybrid Technology Coolant Premix -40°C protects the cooling system from rust, frost, and in summer, from overheating.

Application instructions

RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a prediluted coolant with frost and rust protection for year-round use in automotive engines.

Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.

Instructions: Add RAVENOL HTC Hybrid Technology Coolant Premix -40°C to radiator to fill line.

RAVENOL HTC Hybrid Technology Coolant Premix -40°C can also be used as a “ready for use” dilution in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).

RAVENOL HTC Hybrid Technology Coolant Concentrate is included in the list of recommendations of the LaWa for water management requirements for geothermal probes and geothermal collectors.

Characteristics

  • Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium andcopper alloy radiators
  • Good reserve alkalinity
  • Protection from corrosion and cavitation
  • Prevents sediments and foaming in the cooling system
  • Compatible with elastomers used in automotive radiators
Parameter Unit Value Tests
ASTM D3306, D4340, D4985
D3306, D4340, D4985
Recomendations DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Suitable for DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
Density at 20 °C g/cm³ 1080 EN ISO 12185
1080 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
pH - value at 20 °C 7,5 ASTM D1287
7,5 ASTM D1287
Freezing point °C -40 ASTM D1177
-40 °C ASTM D1177
Approvals DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Recommendations ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
RAVENOL HTC Concentrate Protect MB 325.0

RAVENOL HTC Concentrate Protect MB 325.0

Coolant

RAVENOL HTC Hybrid Technology Coolant Concentrate is an all-season, eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.

Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1.5 L

Vendor code:
1410120-150
1410120-150-01-999

Code:
4014835755611

Volume:
5 L

Vendor code:
1410120-005
1410120-005-01-999

Code:
4014835755659

Volume:
10 L

Vendor code:
1410120-010
 

Volume:
20 L

Vendor code:
1410120-020
1410120-020-01-999

Code:
4014835755628

Volume:
20 L, ecobox

Vendor code:
1410120-B20
1410120-B20-01-888

Code:
4014835852730

Volume:
60 L

Vendor code:
1410120-060
1410120-060-01-999

Code:
4014835755666

Volume:
208 L

Vendor code:
1410120-208
1410120-208-01-999

Code:
4014835755680

Volume:
1000 L

Vendor code:
1410120-700
 

The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.

That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.

RAVENOL HTC Hybrid Technology Coolant Concentrate protects the cooling system from rust, frost, and in summer, from overheating.

Application instructions

RAVENOL HTC Hybrid Technology Coolant Concentrate with frost and rust protection for year-round use in automotive engines. Mix according to chart. Follow manufacturer's recommendations.

Instructions: Clean cooling system, check for leaks, flush.

Mix RAVENOL HTC Hybrid Technology Coolant Concentrate with distilled water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.

RAVENOL HTC Hybrid Technology Coolant Concentrate can also be used in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).

Table of mixing ratios
Antifreeze protection until Parts Antifreeze Parts Water
-20°C 35% 65%
-37°C 50% 50%
-50°C 60% 40%

Characteristics

  • Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium and copper alloy radiators
  • Excellent reserve alkalinity
  • Protection from corrosion and cavitation
  • Prevents sediments and foaming in the cooling system
  • Compatible with elastomers used in automotive radiators
Parameter Unit Value Tests
ASTM D3306, D4340, D4985
D3306, D4340, D4985
Recomendations DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Suitable for DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
Density at 20 °C g/cm³ 1130 EN ISO 12185
1130 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Freezing point (50 % solution) °C -37 ASTM D1177
-37 °C ASTM D1177
pH - value at 20 °C (50 Vol %) 7,0 - 8,0 ASTM D1287
7,0 - 8,0 ASTM D1287
Approvals DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
Recommendations ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
RAVENOL destilliertes Wasser

RAVENOL destilliertes Wasser

For batteries

RAVENOL destilliertes Wasser is deionised distilled water and is manufactured using the ion exchangerprocess.

Compliance with the requirements:
DIN 43530-4, DIN EN 50272

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1360010-001
1360010-001-01-000

Code:
4014835300453

Volume:
5 L

Vendor code:
1360010-005
1360010-005-01-000

Code:
4014835300507

Volume:
5 L, specialist. canister

Vendor code:
1360010-005
1360010-005-01-001

Code:
4014835300514

Volume:
208 L

Vendor code:
1360010-208
 

Volume:
1000 L

Vendor code:
1360010-700
 

Volume:
20 L

Vendor code:
1360010-020
1360010-020-01-001

Code:
4014835300422

In the course of this process, the water flows through a column filled with ion exchange resin. This has theability to exchange its accumulated ions for the ions present in the water.

As the ion exchange resin cannot accumulate an infinite number of ions, they have to be “revived”, i.e. theyhave to be regenerated. This takes place using the currently most commonly used regeneration agents: sodiumchloride (water softening), hydrochloric acid (cation exchange) and sodium hydroxide (anion exchange).The conductivity of the water flowing through is constantly checked in a fully automated process and the ionexchanger unit regulates itself automatically.

RAVENOL destilliertes Wasser deionised water is regularly checked by taking samples.

Application instructions

RAVENOL destilliertes Wasser is ideally suited to filling up vehicle batteries and for steam irons and aquariums (to reduce the hardness of the water).

Parameter Unit Value Tests
Recomendations DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272
Approvals DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272
Recommendations DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
RAVENOL Professional Radiator Cleaner

RAVENOL Professional Radiator Cleaner

Additive

RAVENOL Professional Radiator Cleaner is a radiator cleaning additive, which is used for the quick and easy cleaning of the cooling and heating system.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
0.25 L

Vendor code:
1390302-250
1390302-250-05-000

Code:
4014835802667

RAVENOL Professional Radiator Cleaner breaks down and binds greasy and oily deposits in radiators, heating systems and pipelines.

RAVENOL Professional Radiator Cleaner infiltrates and eliminates sludge and corrosion deposits.RAVENOL Professional Radiator Stop Cleaner neutralises lime residue.

Application instructions

RAVENOL Professional Radiator Cleaner is added to the radiator. It is recommended to replace rubber parts affected by oil seepage.

Area of application:

Radiator repairs

In the event of reduced radiator performance

In the event of deposits in the cooling system

Changing coolant

For cleaning purposes after engine repairs due to oil in the cooling system

Application: RAVENOL Professional Radiator Cleaner suffices for up to 10 litres of coolant.

Fill in

RAVENOL Professional Radiator Cleanerin the used coolant and allow the engine to run at operating temperature for approx. 30 minutes. Drain contaminated mixture – in the case of severe contamination, repeat treatment if necessary. Rinse cooling system with clear water. Refill and remove air after cleaning the cooling system and check for leak tightness.

RAVENOL Professional Radiator Cleaner can lead to an improved cooling performance after repairs on the cooling system.

Characteristics

  • Cleaning of the cooling and heating system
  • Protection of the new coolant against prior contamination
  • Elimination of sludge and corrosion residue
Parameter Unit Value Tests
pH - value at 20 °C 10,25 DIN 19268
10,25 DIN 19268
Density at 20 °C g/cm³ 1003 EN ISO 12185
1003 g/cm³ EN ISO 12185
Color Colorless visual
Colorless visual

Recognizing the number...