Search by VIN / Frame, vehicle make, model, type, unit name, or by the part number of any oil:
Oil for BYD, FangChengBao Leopard 3, EV 2WD (TZ200XYX)
BYD Model (FangChengBao Leopard 3) to find out what kind of oil is used for it
BYD FangChengBao Leopard 3 EV 2WD (TZ200XYX)from 2024 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.
Power:
Nodes and assemblies
Differential, front
RAVENOL VGL SAE 70W-80
RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.
Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1221112-001
1221112-001-01-999
Code:
4014835883147
Volume:
4 L
Vendor code:
1221112-004
1221112-004-01-999
Code:
4014835883178
Volume:
10 L
Vendor code:
1221112-010
1221112-010-01-999
Code:
4014835883208
Volume:
20 L
Vendor code:
1221112-020
Volume:
20 L, ecobox
Vendor code:
1221112-B20
1221112-B20-01-888
Code:
4014835883291
Volume:
60 L
Vendor code:
1221112-060
Volume:
208 L
Vendor code:
1221112-208
RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.
RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.
Application instructions
RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.
Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!
Characteristics
- Outstanding cold flow properties
- Good wear protection protects the gearbox
- Excellent resistance to aging
- Extremely low pour point
- High viscosity stability
- Reduces running noise
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 70W-80 |
70W-80
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | GL-5, MT-1 |
GL-5, MT-1
|
||
| Recomendations | BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| specification | MIL-L-2105 D |
MIL-L-2105 D
|
||
| Density at 20 °C | 848 | EN ISO 12185 |
848
EN ISO 12185
|
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 9.27 | DIN 51562-1 |
9.27
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 50.47 | DIN 51562-1 |
50.47
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| Seq. I at 24 °C | ml/ml | 0/0 | ASTM D892 |
0/0
ml/ml
ASTM D892
|
| Seq. II at 93,5 °C | ml/ml | 10/0 | ASTM D892 |
10/0
ml/ml
ASTM D892
|
| Seq. III at 24 °C after 93,5 °C | ml/ml | 0/0 | ASTM D892 |
0/0
ml/ml
ASTM D892
|
| Copper Corrosion (24h/120 °C) | 1a | ASTM D130 |
1a
ASTM D130
|
|
| Approvals | BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| Tendency to foam (Seq. I, II, III) | . | DIN EN 60243-1 (20°C) |
.
DIN EN 60243-1 (20°C)
|
|
| Recommendations | BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| Brookfield Viscosity at -55 °C | mPa*s | 109400 | ASTM D2983 |
109400
mPa*s
ASTM D2983
|
Differential, rear
RAVENOL VGL SAE 70W-80
RAVENOL VGL SAE 70W-80 is a full synthetic hypoid axle gear oil with the latest full synthetic components for vehicles with most recent transmission technology.
Compliance with the requirements:
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1221112-001
1221112-001-01-999
Code:
4014835883147
Volume:
4 L
Vendor code:
1221112-004
1221112-004-01-999
Code:
4014835883178
Volume:
10 L
Vendor code:
1221112-010
1221112-010-01-999
Code:
4014835883208
Volume:
20 L
Vendor code:
1221112-020
Volume:
20 L, ecobox
Vendor code:
1221112-B20
1221112-B20-01-888
Code:
4014835883291
Volume:
60 L
Vendor code:
1221112-060
Volume:
208 L
Vendor code:
1221112-208
RAVENOL VGL SAE 70W-80 is designed on the basis of high quality synthetic base oils with special additivation and inhibition, which ensure proper functioning of the gearbox. It was specially developed to meet the latest requirements of axle drive manufacturers, especially for BMW vehicles.
RAVENOL VGL SAE 70W-80 ensures proper functioning of the aggregates even under the most severe operating conditions. Even under large temperature fluctuations it ensures a reliable lubricating film.
Application instructions
RAVENOL VGL SAE 70W-80 is excellent for use in heavily loaded axle drives of vehicles. It is particularly suitable for axle drives with hypoid gearing.
Use RAVENOL VGL SAE 70W-80 according to the manufacturer's instructions!
Characteristics
- Outstanding cold flow properties
- Good wear protection protects the gearbox
- Excellent resistance to aging
- Extremely low pour point
- High viscosity stability
- Reduces running noise
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 70W-80 |
70W-80
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | GL-5, MT-1 |
GL-5, MT-1
|
||
| Recomendations | BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| specification | MIL-L-2105 D |
MIL-L-2105 D
|
||
| Density at 20 °C | 848 | EN ISO 12185 |
848
EN ISO 12185
|
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 9.27 | DIN 51562-1 |
9.27
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 50.47 | DIN 51562-1 |
50.47
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 169 | DIN ISO 2909 |
169
DIN ISO 2909
|
|
| Seq. I at 24 °C | ml/ml | 0/0 | ASTM D892 |
0/0
ml/ml
ASTM D892
|
| Seq. II at 93,5 °C | ml/ml | 10/0 | ASTM D892 |
10/0
ml/ml
ASTM D892
|
| Seq. III at 24 °C after 93,5 °C | ml/ml | 0/0 | ASTM D892 |
0/0
ml/ml
ASTM D892
|
| Copper Corrosion (24h/120 °C) | 1a | ASTM D130 |
1a
ASTM D130
|
|
| Approvals | BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW Hypoid Axle Oil G3, MIL-L-2105 D, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| Tendency to foam (Seq. I, II, III) | . | DIN EN 60243-1 (20°C) |
.
DIN EN 60243-1 (20°C)
|
|
| Recommendations | BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2 |
BMW 83222413512, BMW 83222460128, BMW Hypoid Axle Oil G3, BMW Motorrad Hypoid Axle Oil G3, Mazda Hypoid Gear Oil (SG1), Mazda K020-01-SG1, VW G 060 190 A2
|
||
| Brookfield Viscosity at -55 °C | mPa*s | 109400 | ASTM D2983 |
109400
mPa*s
ASTM D2983
|
Hydraulic brake system
RAVENOL DOT 4 LV
RAVENOL DOT 4 LV is a very high specification Brake and Clutch Fluid which conforms to and exceeds the latest ISO 4925 Class 6 standard.
Compliance with the requirements:
Ford WSS-M6C 65-A2, VW 501.14
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1350615-020
Volume:
1 L
Vendor code:
1350615-001
1350615-001-01-555
Code:
4014835903944
The specific formulation of RAVENOL DOT 4 LV also meets current international specifications US FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and ISO 4925 (Classes 3 & 4).
With its exceptional viscosity performance even at extremely Low Viskosity (max. 750 cSt @ -40°C) RAVENOL DOT 4 LV is especially recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.
The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 4 LV even at low temperatures.
RAVENOL DOT 4 LV mixes safely with other brake and clutch fluids that meet the above specifications.
Application instructions
RAVENOL DOT 4 LV brake fluid can be used in all vehicles where ISO 4925 Class 6 specification is required.
RAVENOL DOT 4 LV is recommended for use in the hydraulic brake and clutch systems of vehicles fitted with ESP / ASR (Electronic Stability Program) systems.
RAVENOL DOT 4 LV is also recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a non-petroleum based fluid of this type is specified.
RAVENOL DOT 4 LV brake fluid is miscible with all known brake fluids of the same specification.
To use the high performance level of RAVENOL DOT 4 LV, a complete change of the brake fluid is recommended.
RAVENOL DOT 4 LV is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).
FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.
Dispose of used brake fluid responsibly (EU waste code 160113)Brake fluid damages paint work –if spilt wash off immediately with plenty of water.
Characteristics
- Fluidity even at very low temperatures
- Optimal ABS properties.
- Chemical stability.
- High lubricating power
- Neutral behavior towards brake parts.
- Can be mixed with all brake fluids of the same specification.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Type | Synthetic |
Synthetic
|
||
| Recomendations | Ford WSS-M6C 65-A2, VW 501.14 |
Ford WSS-M6C 65-A2, VW 501.14
|
||
| specification | DOT 3, DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704 |
DOT 3, DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704
|
||
| Density at 20 °C | g/cm³ | 1052 | EN ISO 12185 |
1052
g/cm³
EN ISO 12185
|
| Color | light yellow | visual |
light yellow
visual
|
|
| Viscosity at 100 °C | mPa*s | 2.1 | ASTM D445 |
2.1
mPa*s
ASTM D445
|
| Viscosity at -40 °C | cSt | 675 | ASTM D445 |
675
cSt
ASTM D445
|
| Wet Equilibrium Reflux Boiling Point | °C | 172 | FMVSS 116 |
172
°C
FMVSS 116
|
| High Temperature Stability | °C | -1 | FMVSS 116 |
-1
°C
FMVSS 116
|
| Chemical Stability | °C | 1 | FMVSS 116 |
1
°C
FMVSS 116
|
| Evaporation | %w/w | 61 | FMVSS 116 |
61
%w/w
FMVSS 116
|
| Fluidity & Appearance at -40 °C | i.O., 4s | FMVSS 116 |
i.O., 4s
FMVSS 116
|
|
| Fluidity & Appearance at -50 °C | i.O., 8s | FMVSS 116 |
i.O., 8s
FMVSS 116
|
|
| Water Tolerance at -40 °C | transparent, 3s | FMVSS 116 |
transparent, 3s
FMVSS 116
|
|
| Water Tolerance at +60 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Compatibility at -40 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Compatibility at +60 °C | Transparent | FMVSS 116 |
Transparent
FMVSS 116
|
|
| Tinned Iron | Δ mg/cm² | 0.04 | FMVSS 116 |
0.04
Δ mg/cm²
FMVSS 116
|
| Steel | mg/cm² | -0.01 | FMVSS 116 |
-0.01
mg/cm²
FMVSS 116
|
| Aluminium | mg/cm² | 0.02 | FMVSS 116 |
0.02
mg/cm²
FMVSS 116
|
| Cast Iron | Δ mg/cm² | -0,03 | FMVSS 116 |
-0,03
Δ mg/cm²
FMVSS 116
|
| Brass | mg/cm² | -0.08 | FMVSS 116 |
-0.08
mg/cm²
FMVSS 116
|
| Copper | mg/cm² | -0.05 | FMVSS 116 |
-0.05
mg/cm²
FMVSS 116
|
| Zinc | mg/cm² | 0.01 | FMVSS 116 |
0.01
mg/cm²
FMVSS 116
|
| Rubber Diameter Change | 0.16 | FMVSS 116 |
0.16
FMVSS 116
|
|
| Hardness Change | °IRHD | -4 | FMVSS 116 |
-4
°IRHD
FMVSS 116
|
| Appearance | i.O. | FMVSS 116 |
i.O.
FMVSS 116
|
|
| SBR at 70 °C | mm | 0.56 | FMVSS 116 |
0.56
mm
FMVSS 116
|
| SBR at 120 °C | mm | 0.73 | FMVSS 116 |
0.73
mm
FMVSS 116
|
| EPDM at 70 °C (as required by SAE J1703) | IRHD | -2 | FMVSS 116 |
-2
IRHD
FMVSS 116
|
| EPDM at 120 °C | IRHD | -2 | FMVSS 116 |
-2
IRHD
FMVSS 116
|
| Natural at 70 °C (as required by ISO 4925) | mm | 0.38 | FMVSS 116 |
0.38
mm
FMVSS 116
|
| Approvals | DOT 3, DOT 4, Ford WSS-M6C 65-A2, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704, VW 501.14 |
DOT 3, DOT 4, Ford WSS-M6C 65-A2, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6, SAE J 1703, SAE J 1704, VW 501.14
|
||
| Recommendations | Ford WSS-M6C65-A2, VW 501 14 |
Ford WSS-M6C65-A2, VW 501 14
|
Cooling system
RAVENOL ETC Concentrate Protect C12evo
RAVENOL ETC Concentrate Protect C12evo is an eco-friendly coolant free from 2-ethylhexanoic acid. It is a borate, nitrite and phosphate-free coolant for cooling circuits in combustion engines based on 1,2- ethanediol (monoethylene glycol), which provides maintenance-free corrosion and frost protection. This product is formulated as long-term radiator protection based on the latest Si-OAT technology. Organic acids work together with mineral silicates to provide the best possible protection.
Compliance with the requirements:
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 325.0, MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410165-150
1410165-150-01-999
Code:
4014835882478
Volume:
5 L
Vendor code:
1410165-005
1410165-005-01-999
Code:
4014835882409
Volume:
20 L
Vendor code:
1410165-020
1410165-020-01-999
Code:
4014835882430
Volume:
20 L, ecobox
Vendor code:
1410165-B20
1410165-B20-01-888
Code:
4014835882522
Volume:
60 L
Vendor code:
1410165-060
1410165-060-01-999
Code:
4014835882454
Volume:
208 L
Vendor code:
1410165-208
Volume:
1000 L
Vendor code:
1410165-700
The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection. That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.
RAVENOL ETC Concentrate Protect C12evo protects the cooling system from corrosion, frost and from overheating in summer.
Application instructions
RAVENOL ETC Concentrate Protect C12evo with highly effective frost and corrosion protection. Application according to the mixture table. Follow manufacturer's recommendations.
Instructions for use: Clean the cooling system, check for leaks, flush. Mix RAVENOL ETC Concentrate Protect C12evo with demineralized or distilled water (according to the mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.
ATTENTION: Never use undiluted! We recommend a mixing ratio of 50:50 (vol %). The minimum proportion of antifreeze concentrate should be between 35% - 60%, otherwise the product will not have a sufficient effect.
Mixture table:
| Frost protection up to approx. | proportion of concentrate | proportion of water |
|---|---|---|
| -20°C | 35% | 65% |
| -37°C | 50% | 50% |
| -50°C | 60% | 40% |
Characteristics
- Modern additive inhibitors based on Si-OAT technology
- Premium anticorrosion additives for optimal protection for all metals and metal alloys used in coolingsystems, including aluminium
- Long-term corrosion protection up to 5 years
- Compatible with elastomers used in automotive radiators
- Prevention of deposits and foam formation in the cooling system
- Miscibility with all other types of radiator antifreeze
- Free from nitrites, amines, phosphates, borates and 2-ethylhexanoic acid (2-EHA)
- Outstanding protection against thermal stress
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D3306, D4985, D6210 |
D3306, D4985, D6210
|
||
| Recomendations | BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 325.0, MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2 |
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 325.0, MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
|
||
| Density at 20 °C | g/cm³ | 1125 | EN ISO 12185 |
1125
g/cm³
EN ISO 12185
|
| Color | pink | visual |
pink
visual
|
|
| Freezing point (50 % solution) | °C | -38 | ASTM D1177 |
-38
°C
ASTM D1177
|
| pH - value at 20 °C (50 Vol %) | 7,5-8,5 | ASTM D1287 |
7,5-8,5
ASTM D1287
|
|
| Approvals | BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 325.0, MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2 |
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 325.0, MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
|
||
| Recommendations | ASTM D3306, ASTM D4985, ASTM D6210, BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, Ford MU7J 19544 BA, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 NF, MAN 324 Si-OAT, MB 325.0 (Konzentrat), MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123 (Österreich), SAE J1034, Scania TB 1451, VOLVO TR 1286083, VOLVO TR-31854114-002, VOLVO VCS-2, VW TL 774-L (entspricht G12evo) |
ASTM D3306, ASTM D4985, ASTM D6210, BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29C100 (MB 325.0), DTFR 29C120 (MB 325.5), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, Ford MU7J 19544 BA, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 NF, MAN 324 Si-OAT, MB 325.0 (Konzentrat), MB 325.5, MB 325.6, MTU MTL 5048, O Norm V 5123 (Österreich), SAE J1034, Scania TB 1451, VOLVO TR 1286083, VOLVO TR-31854114-002, VOLVO VCS-2, VW TL 774-L (entspricht G12evo)
|
Antifreeze
RAVENOL ETC Premix -40°C Protect C12evo is is a ready-to-use, eco-friendly coolant free of 2-ethylhexanoic acid, premixed with water. It is a borate, nitrite and phosphate-free coolant for cooling circuits in combustion engines, based on 1.2- Ethanediol (monoethylene glycol), which provides maintenance-free corrosion and frost protection. This product is formulated as long-term radiator protection based on the latest Si-OAT technology. Organic acids work together with mineral silicates to provide the best possible protection.
Compliance with the requirements:
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 326.0, MB 326.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410166-150
1410166-150-01-999
Code:
4014835882614
Volume:
20 L
Vendor code:
1410166-020
1410166-020-01-999
Code:
4014835882577
Volume:
20 L, ecobox
Vendor code:
1410166-B20
1410166-B20-01-888
Code:
4014835882676
Volume:
60 L
Vendor code:
1410166-060
1410166-060-01-999
Code:
4014835882591
Volume:
208 L
Vendor code:
1410166-208
1410166-208-01-999
Code:
4014835882645
Volume:
1000 L
Vendor code:
1410166-700
The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection. That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.
RAVENOL ETC Premix -40°C Protect C12evo protects the cooling system from corrosion and frost as well as from overheating in summer.
Application instructions
RAVENOL ETC Premix -40°C Protect C12evo is a premixed coolant with frost and corrosion protection for year-round use in automotive engines. Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions:
Clean cooling system, check for leaks, flush. Add RAVENOL ETC Premix -40°C Protect C12evo to fill level.
Characteristics
- Modern additive inhibitors based on Si-OAT technology
- Premium anticorrosion additives for optimal protection for all metals and metal alloys used in coolingsystems, including aluminium
- Long-term corrosion protection up to 5 years
- Compatible with elastomers used in automotive radiators
- Prevention of deposits and foam formation in the cooling system
- Miscibility with all other types of radiator antifreeze
- Free from nitrites, amines, phosphates, borates and 2-ethylhexanoic acid (2-EHA)
- Outstanding protection against thermal stress
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D3306, D4985, D6210 |
D3306, D4985, D6210
|
||
| Recomendations | BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 326.0, MB 326.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2 |
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 326.0, MB 326.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
|
||
| Density at 20 °C | g/cm³ | 1078 | EN ISO 12185 |
1078
g/cm³
EN ISO 12185
|
| Color | pink | visual |
pink
visual
|
|
| pH - value at 20 °C (50 Vol %) | >8 | ASTM D1287 |
>8
ASTM D1287
|
|
| pH - value at 20 °C | >8 | ASTM D1287 |
>8
ASTM D1287
|
|
| Approvals | BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 326.0, MB 326.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2 |
BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 Type NF, MAN 324 Type Si-OAT, MB 326.0, MB 326.6, MTU MTL 5048, O Norm V 5123, SAE J 1034, Scania TB 1451, VW L 774-L (entspricht G12evo), Volvo TR 1286083, Volvo TR-31854114-002, Volvo VCS-2
|
||
| Recommendations | ASTM D3306, ASTM D4985, ASTM D6210, BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, Ford MU7J 19544 CA, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 NF, MAN 324 Si-OAT, MB 326.0 (Premix), MB 326.6 (Premix), MTU MTL 5048, O Norm V 5123 (Österreich), SAE J1034, Scania TB 1451, VOLVO TR 1286083, VOLVO TR-31854114-002, VOLVO VCS-2, VW TL 774-L (entspricht G12evo) |
ASTM D3306, ASTM D4985, ASTM D6210, BMW LC-87, BS 6580:2010 (GB), CUNA NC 956-16 (Italien), Cummins CES 14603, DTFR 29D100 (MB 326.0), Deutz DQC CC-14, Fiat 9.55523, Ford ESD-M97B49-A, Ford MU7J 19544 CA, IVECO 18-1830, JIS K 2234 (Japan), Liebherr LH-01-COL3A, MAN 324 NF, MAN 324 Si-OAT, MB 326.0 (Premix), MB 326.6 (Premix), MTU MTL 5048, O Norm V 5123 (Österreich), SAE J1034, Scania TB 1451, VOLVO TR 1286083, VOLVO TR-31854114-002, VOLVO VCS-2, VW TL 774-L (entspricht G12evo)
|
RAVENOL destilliertes Wasser
For batteries
RAVENOL destilliertes Wasser is deionised distilled water and is manufactured using the ion exchangerprocess.
Compliance with the requirements:
DIN 43530-4, DIN EN 50272
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1360010-001
1360010-001-01-000
Code:
4014835300453
Volume:
5 L
Vendor code:
1360010-005
1360010-005-01-000
Code:
4014835300507
Volume:
5 L, specialist. canister
Vendor code:
1360010-005
1360010-005-01-001
Code:
4014835300514
Volume:
208 L
Vendor code:
1360010-208
Volume:
1000 L
Vendor code:
1360010-700
Volume:
20 L
Vendor code:
1360010-020
1360010-020-01-001
Code:
4014835300422
In the course of this process, the water flows through a column filled with ion exchange resin. This has theability to exchange its accumulated ions for the ions present in the water.
As the ion exchange resin cannot accumulate an infinite number of ions, they have to be “revived”, i.e. theyhave to be regenerated. This takes place using the currently most commonly used regeneration agents: sodiumchloride (water softening), hydrochloric acid (cation exchange) and sodium hydroxide (anion exchange).The conductivity of the water flowing through is constantly checked in a fully automated process and the ionexchanger unit regulates itself automatically.
RAVENOL destilliertes Wasser deionised water is regularly checked by taking samples.
Application instructions
RAVENOL destilliertes Wasser is ideally suited to filling up vehicle batteries and for steam irons and aquariums (to reduce the hardness of the water).
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Recomendations | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Approvals | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Recommendations | DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser |
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
|
RAVENOL Professional Radiator Cleaner
Additive
RAVENOL Professional Radiator Cleaner is a radiator cleaning additive, which is used for the quick and easy cleaning of the cooling and heating system.
- Available packaging
- Product parameters
Volume:
0.25 L
Vendor code:
1390302-250
1390302-250-05-000
Code:
4014835802667
RAVENOL Professional Radiator Cleaner breaks down and binds greasy and oily deposits in radiators, heating systems and pipelines.
RAVENOL Professional Radiator Cleaner infiltrates and eliminates sludge and corrosion deposits.RAVENOL Professional Radiator Stop Cleaner neutralises lime residue.
Application instructions
RAVENOL Professional Radiator Cleaner is added to the radiator. It is recommended to replace rubber parts affected by oil seepage.
Area of application:
Radiator repairs
In the event of reduced radiator performance
In the event of deposits in the cooling system
Changing coolant
For cleaning purposes after engine repairs due to oil in the cooling system
Application: RAVENOL Professional Radiator Cleaner suffices for up to 10 litres of coolant.
Fill in
RAVENOL Professional Radiator Cleanerin the used coolant and allow the engine to run at operating temperature for approx. 30 minutes. Drain contaminated mixture – in the case of severe contamination, repeat treatment if necessary. Rinse cooling system with clear water. Refill and remove air after cleaning the cooling system and check for leak tightness.
RAVENOL Professional Radiator Cleaner can lead to an improved cooling performance after repairs on the cooling system.
Characteristics
- Cleaning of the cooling and heating system
- Protection of the new coolant against prior contamination
- Elimination of sludge and corrosion residue
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| pH - value at 20 °C | 10,25 | DIN 19268 |
10,25
DIN 19268
|
|
| Density at 20 °C | g/cm³ | 1003 | EN ISO 12185 |
1003
g/cm³
EN ISO 12185
|
| Color | Colorless | visual |
Colorless
visual
|