Search by VIN, motorcycle make, model, type or unit name, or by the part number of any oil:

Search
Ski-Doo Summit

Oil for Ski-Doo, Summit, Summit X 850 E-TEC

Ski-Doo Model (Summit) to find out what kind of oil is used for it

Ski-Doo Summit Summit X 850 E-TECfrom 2017 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Fuel: Gasoline
Drive: belt
Engine: Single row
Number of cylinders: 2
Displacement: 849 cc
Power: 165 hp / 121 kW

Nodes and assemblies

Engine + Rotax 850 E-TEC

Liquid volume (basic): 3.4 L
RAVENOL SNOWMOBILES Fullsynth. 2-Takt

RAVENOL SNOWMOBILES Fullsynth. 2-Takt

For snowmobiles

RAVENOL SNOWMOBILES Fullsynth. 2-Takt is high quality blue coloured full synthetic two-stroke engine oil especially developed for 2-stroke snowmobiles.

Compliance with the requirements:
Arctic , Rotax 253

Show more Hide details

API:  TC

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1151310-001
1151310-001-01-999

Code:
4014835727915

Volume:
4 L

Vendor code:
1151310-004
1151310-004-01-999

Code:
4014835727991

Volume:
10 L

Vendor code:
1151310-010
1151310-010-01-999

Code:
4014835727946

Volume:
20 L

Vendor code:
1151310-020
 

Volume:
20 L, ecobox

Vendor code:
1151310-B20
1151310-B20-01-888

Code:
4014835779327

Volume:
60 L

Vendor code:
1151310-060
 

Volume:
208 L

Vendor code:
1151310-208
 

Volume:
1000 L

Vendor code:
1151310-700
 

RAVENOL SNOWMOBILES Fullsynth. 2-Takt with special esters and Polyisobutylene (PIB) and effectively low ash additives.

Application instructions

RAVENOL SNOWMOBILES Fullsynth. 2-Takt can generally be mixed with regular petrol 1:100.

RAVENOL SNOWMOBILES Fullsynth. 2-Takt is used for lubrication of air-cooled two-stroke petrol engines with very high speed and heaviest load.

RAVENOL SNOWMOBILES Fullsynth. 2-Takt is also suitable for the lubrication of two stroke scooters with water cooling.

Characteristics

  • A proper lubrication of all engine parts
  • A strong cleaning effect, for clean combustion chambers. Cleans intake and exhaust ports from combustion residues and deposits
  • Clean spark plugs provide optimal performance of the engines
  • A very high wear and corrosion protection
  • Low exhaust emission levels by good combustion
  • Very low Pourpoint, also to use at very low temperature
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
API TC
TC
JASO FD
FD
Recomendations Arctic , Rotax 253
Arctic , Rotax 253
specification ISO L-EGD
ISO L-EGD
Suitable for Bombardier, Kawasaki, Suzuki, Yamaha
Bombardier, Kawasaki, Suzuki, Yamaha
Density at 20 °C g/cm³ 873 EN ISO 12185
873 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Viscosity at 100 °C mm²/s 9.4 DIN 51562-1
9.4 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 55.15 DIN 51562-1
55.15 mm²/s DIN 51562-1
Viscosity Index VI 154 DIN ISO 2909
154 DIN ISO 2909
Approvals Arctic , ISO L-EGD, Rotax 253
Arctic , ISO L-EGD, Rotax 253
Recommendations Arctic Cat, Bombardier, Kawasaki, Rotax 253, Suzuki, Yamaha
Arctic Cat, Bombardier, Kawasaki, Rotax 253, Suzuki, Yamaha
Compatibility at temperatures as low as -40°C Minute 28 ASTM D 4682
28 Minute ASTM D 4682
Brookfield Viscosity at -40 °C mPa*s 43540 ASTM D2983
43540 mPa*s ASTM D2983
Engine cycle 2T
2T
RAVENOL Professional Engine Cleaner

RAVENOL Professional Engine Cleaner

Additive

RAVENOL Professional Engine Cleaner is active concentrate for longer oil cleanliness for all petrol and diesel engines (with and without catalytic converter).

Product discontinued

Replacement via: RAVENOL RSS SAE 10W-60

  • Available packaging
  • Full description
  • Product parameters

Volume:
0.3 L

Vendor code:
1390321-300
1390321-300-05-000

Code:
4014835862869

RAVENOL Professional Engine Cleaner can also be used in motorcycles.

RAVENOL Professional Engine Cleaner effectively breaks down dirt accumulation and sludge deposits in the engine compartment using intensive-cleaning tensides and removes these effectively when draining used oil.

RAVENOL Professional Engine Cleaner cleans and rinses the entire engine system.

Application Note

RAVENOL Professional Engine Cleaner is added to the warm motor oil.

Area of application:

-If black sludge is suspected

-In the event of hydraulic tappets rattling

-In the event of delayed oil change

-For soiled engines or used oil

-Preventively at every oil change to avoid contamination of the engine

-Also suitable for oldtimers

Dosage: 300 ml RAVENOL Professional Engine Cleaner are sufficient for one application of approx. 5L Oil, regardless of manufacturer and motor size.

Application: Add the contents to the warm motor oil before changing oil. Do not go below the minimum oil level. For maximum effect, allow to run for up to 10 minutes. Afterwards, immediately replace oil and filter.

RAVENOL Professional Engine Cleaner is tried and tested for aggregates with motor oils based on mineraloil and synthetic oil.

Characteristics

  • Long-term effectiveness and clean fresh oil
  • Remedy for soiled engines
  • Protection against compression loss in the area of the piston rings
  • Leads to better exhaust emissions and increases the performance of the engine
Parameter Unit Value Tests
Viscosity at 40 °C mm²/s 7 DIN EN ISO 3104
7 mm²/s DIN EN ISO 3104
Density at 20 °C 805 EN ISO 12185
805 EN ISO 12185
Color Light brown visual
Light brown visual

Hydraulic brake system

Liquid volume (basic): 0.065 L
RAVENOL DOT 4

RAVENOL DOT 4

For brake system

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
250 ml

Vendor code:
1350601-250
1350601-250-05-000

Code:
4014835692121

Volume:
500 ml

Vendor code:
1350601-500
1350601-500-05-000

Code:
4014835692152

Volume:
1 L

Vendor code:
1350601-001
1350601-001-01-000

Code:
4014835692114

Volume:
20 L

Vendor code:
1350601-020
 

Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J 1704, ISO 4925 and the safety regulations FMVSS 116 DOT 3 and DOT 4 from the United States of America are exceeded.

Application Note

RAVENOL DOT can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.

RAVENOL DOT is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT , a complete change of the brake fluid is recommended.

RAVENOL DOT is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • optimum ABS characteristics
  • chemical stability
  • best lubrication efficiency
  • neutral behaviour regarding brake parts
  • low viscosity at low temperatures
  • miscible with all brake fluids of the same specifications
Parameter Unit Value Tests
Type Synthetic
Synthetic
specification DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704
Density at 20 °C g/cm³ 1052 EN ISO 12185
1052 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mPa*s 2.41 ASTM D445
2.41 mPa*s ASTM D445
Viscosity at -40 °C cSt 1340 ASTM D445
1340 cSt ASTM D445
Wet Equilibrium Reflux Boiling Point °C 169 FMVSS 116
169 °C FMVSS 116
High Temperature Stability °C -1 FMVSS 116
-1 °C FMVSS 116
Chemical Stability °C 1 FMVSS 116
1 °C FMVSS 116
Evaporation %w/w 61 FMVSS 116
61 %w/w FMVSS 116
Fluidity & Appearance at -40 °C i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
Fluidity & Appearance at -50 °C i.O., 8s FMVSS 116
i.O., 8s FMVSS 116
Water Tolerance at -40 °C transparent, 3s FMVSS 116
transparent, 3s FMVSS 116
Water Tolerance at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at -40 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Tinned Iron Δ mg/cm² 0.04 FMVSS 116
0.04 Δ mg/cm² FMVSS 116
Steel mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Aluminium mg/cm² 0.02 FMVSS 116
0.02 mg/cm² FMVSS 116
Cast Iron Δ mg/cm² -0,03 FMVSS 116
-0,03 Δ mg/cm² FMVSS 116
Brass mg/cm² -0.08 FMVSS 116
-0.08 mg/cm² FMVSS 116
Copper mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Zinc mg/cm² 0.01 FMVSS 116
0.01 mg/cm² FMVSS 116
Rubber Diameter Change 0.16 FMVSS 116
0.16 FMVSS 116
Hardness Change °IRHD -4 FMVSS 116
-4 °IRHD FMVSS 116
Appearance i.O. FMVSS 116
i.O. FMVSS 116
SBR at 70 °C mm 0.56 FMVSS 116
0.56 mm FMVSS 116
SBR at 120 °C mm 0.73 FMVSS 116
0.73 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703) IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
EPDM at 120 °C IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925) mm 0.38 FMVSS 116
0.38 mm FMVSS 116
Approvals DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704

Recognizing the number...