Search by VIN, truck make, model, type or unit name, or by the part number of any oil:

Search
Mack Gearboxes Mack

Oil for Mack, Gearboxes Mack, Maxitorque ES TM-308

Mack Model (Gearboxes Mack) to find out what kind of oil is used for it

Mack Gearboxes Mack Maxitorque ES TM-308from 2002 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Fuel: Other/fuel type not specified
Power:

Nodes and assemblies

Mechanical gearbox

Liquid volume (basic): 11.4 L
RAVENOL Getriebeoel SGO SAE 80W-140 GL-5

RAVENOL Getriebeoel SGO SAE 80W-140 GL-5

For gearbox

RAVENOL SGO SAE 80W-140 GL-5 is a synthetic transmission oil for high loaded hypoid gearboxes based on high quality synthetic base oils and additives that are a balanced combination of active ingredients. Special high-pressure (EP) agents and other additives offer excellent wear protection for RAVENOL SGO SAE 80W-140 GL-5 even under severe operating conditions.

Compliance with the requirements:
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A

Show more Hide details

SAE:  80W-140

API:  GL-4 GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1222201-001
 

Volume:
4 L

Vendor code:
1222201-004
 

Volume:
20 L

Vendor code:
1222201-020
1222201-020-01-999

Code:
4014835849853

Volume:
20 L, ecobox

Vendor code:
1222201-B20
 

Volume:
60 L

Vendor code:
1222201-060
 

Volume:
208 L

Vendor code:
1222201-208
1222201-208-01-999

Code:
4014835849679

Volume:
1000 L

Vendor code:
1222201-700
 

Application instructions

RAVENOL SGO SAE 80W-140 GL-5 is designed for use in highly loaded, hypoid gears for hypoid gearbox, as well as for axle, transfer case, transmission gear, auxiliary gearboxes in vehicles and machinery and for use as an extreme pressure gear oil where this grade of lubricant is specified by the manufacturer.

Characteristics

  • A pressure-resistant lubricating film, excellent high-pressure (EP) properties
  • High viscosity index
  • Excellent oxidation stability
  • An exceptional viscosity-temperature behavior
  • A low pour point
  • Excellent protection against rust and corrosion
  • Wear-resistant effect
  • Good air separation capacity, no foam formation
Parameter Unit Value Tests
SAE 80W-140
80W-140
Type Synthetic
Synthetic
API GL-4, GL-5, MT-1
GL-4, GL-5, MT-1
Recomendations MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
Suitable for Dana
Dana
Density at 20 °C g/cm³ 850 EN ISO 12185
850 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mm²/s 27.5 DIN 51562-1
27.5 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 205.1 DIN 51562-1
205.1 mm²/s DIN 51562-1
Viscosity Index VI 171 DIN ISO 2909
171 DIN ISO 2909
Brookfield Viscosity at -12 °C mPa*s 32.000 ASTM D2983
32.000 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1a ASTM D130
1a ASTM D130
Approvals MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
Recommendations API MT-1, Dana, MIL-L-2105 D, Mack GO-J, Meritor, SAE J2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
API MT-1, Dana, MIL-L-2105 D, Mack GO-J, Meritor, SAE J2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A

Mechanical gearbox

Liquid volume (basic): 11.4 L
RAVENOL Getriebeoel SGO SAE 80W-140 GL-5

RAVENOL Getriebeoel SGO SAE 80W-140 GL-5

For gearbox

RAVENOL SGO SAE 80W-140 GL-5 is a synthetic transmission oil for high loaded hypoid gearboxes based on high quality synthetic base oils and additives that are a balanced combination of active ingredients. Special high-pressure (EP) agents and other additives offer excellent wear protection for RAVENOL SGO SAE 80W-140 GL-5 even under severe operating conditions.

Compliance with the requirements:
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A

Show more Hide details

SAE:  80W-140

API:  GL-4 GL-5 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1222201-001
 

Volume:
4 L

Vendor code:
1222201-004
 

Volume:
20 L

Vendor code:
1222201-020
1222201-020-01-999

Code:
4014835849853

Volume:
20 L, ecobox

Vendor code:
1222201-B20
 

Volume:
60 L

Vendor code:
1222201-060
 

Volume:
208 L

Vendor code:
1222201-208
1222201-208-01-999

Code:
4014835849679

Volume:
1000 L

Vendor code:
1222201-700
 

Application instructions

RAVENOL SGO SAE 80W-140 GL-5 is designed for use in highly loaded, hypoid gears for hypoid gearbox, as well as for axle, transfer case, transmission gear, auxiliary gearboxes in vehicles and machinery and for use as an extreme pressure gear oil where this grade of lubricant is specified by the manufacturer.

Characteristics

  • A pressure-resistant lubricating film, excellent high-pressure (EP) properties
  • High viscosity index
  • Excellent oxidation stability
  • An exceptional viscosity-temperature behavior
  • A low pour point
  • Excellent protection against rust and corrosion
  • Wear-resistant effect
  • Good air separation capacity, no foam formation
Parameter Unit Value Tests
SAE 80W-140
80W-140
Type Synthetic
Synthetic
API GL-4, GL-5, MT-1
GL-4, GL-5, MT-1
Recomendations MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
Suitable for Dana
Dana
Density at 20 °C g/cm³ 850 EN ISO 12185
850 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mm²/s 27.5 DIN 51562-1
27.5 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 205.1 DIN 51562-1
205.1 mm²/s DIN 51562-1
Viscosity Index VI 171 DIN ISO 2909
171 DIN ISO 2909
Brookfield Viscosity at -12 °C mPa*s 32.000 ASTM D2983
32.000 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1a ASTM D130
1a ASTM D130
Approvals MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
MIL-L-2105 D, Mack GO-J, SAE J 2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
Recommendations API MT-1, Dana, MIL-L-2105 D, Mack GO-J, Meritor, SAE J2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
API MT-1, Dana, MIL-L-2105 D, Mack GO-J, Meritor, SAE J2360, Scania STO 1:0, ZF TE-ML 05A, ZF TE-ML 07A, ZF TE-ML 12E, ZF TE-ML 16C, ZF TE-ML 16D, ZF TE-ML 21A
RAVENOL Truck MTF-50

RAVENOL Truck MTF-50

For trucks

RAVENOL Truck MTF-50 is a full synthetic heavy duty manual transmission oil requiring a non-EP lubricant.

Compliance with the requirements:
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L

Show more Hide details

API:  MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221106-001
1221106-001-01-999

Volume:
4 L

Vendor code:
1221106-004
1221106-004-01-999

Volume:
10 L

Vendor code:
1221106-010
 

Volume:
20 L

Vendor code:
1221106-020
1221106-020-01-999

Volume:
60 L

Vendor code:
1221106-060
1221106-060-01-999

Volume:
208 L

Vendor code:
1221106-208
1221106-208-01-999

RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.

RAVENOL Truck MTF-50 is ideally suited for severe operating conditions and extended oil change intervals.

Application Note

RAVENOL Truck MTF-50 is recommended for extended drain an severe service in heavy duty (class 6, 7, and 8) manual transmissions requiring a non-EP lubricant.

Characteristics

  • Excellent thermal stability.
  • Strong protection against rust, corrosion and foaming.
  • A very low pour point.
  • Excellent EP properties.
  • A good switching behavior at low temperatures.
  • An extended service life.
  • Fuel savings.
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
API MT-1
MT-1
Recomendations Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Density at 20 °C g/cm³ 857 EN ISO 12185
857 g/cm³ EN ISO 12185
Color Brown visual
Brown visual
Viscosity at 100 °C mm²/s 17.5 DIN 51562-1
17.5 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 132 DIN 51562-1
132 mm²/s DIN 51562-1
Viscosity Index VI 146 DIN ISO 2909
146 DIN ISO 2909
Brookfield Viscosity at -26 °C mPa*s 16.900 ASTM D2983
16.900 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1a ASTM D130
1a ASTM D130
Approvals Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L

Mechanical gearbox

Liquid volume (basic): 11.4 L
RAVENOL Truck MTF-50

RAVENOL Truck MTF-50

For trucks

RAVENOL Truck MTF-50 is a full synthetic heavy duty manual transmission oil requiring a non-EP lubricant.

Compliance with the requirements:
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L

Show more Hide details

API:  MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221106-001
1221106-001-01-999

Volume:
4 L

Vendor code:
1221106-004
1221106-004-01-999

Volume:
10 L

Vendor code:
1221106-010
 

Volume:
20 L

Vendor code:
1221106-020
1221106-020-01-999

Volume:
60 L

Vendor code:
1221106-060
1221106-060-01-999

Volume:
208 L

Vendor code:
1221106-208
1221106-208-01-999

RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.

RAVENOL Truck MTF-50 is ideally suited for severe operating conditions and extended oil change intervals.

Application Note

RAVENOL Truck MTF-50 is recommended for extended drain an severe service in heavy duty (class 6, 7, and 8) manual transmissions requiring a non-EP lubricant.

Characteristics

  • Excellent thermal stability.
  • Strong protection against rust, corrosion and foaming.
  • A very low pour point.
  • Excellent EP properties.
  • A good switching behavior at low temperatures.
  • An extended service life.
  • Fuel savings.
Parameter Unit Value Tests
Type Full synthetic
Full synthetic
API MT-1
MT-1
Recomendations Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Density at 20 °C g/cm³ 857 EN ISO 12185
857 g/cm³ EN ISO 12185
Color Brown visual
Brown visual
Viscosity at 100 °C mm²/s 17.5 DIN 51562-1
17.5 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 132 DIN 51562-1
132 mm²/s DIN 51562-1
Viscosity Index VI 146 DIN ISO 2909
146 DIN ISO 2909
Brookfield Viscosity at -26 °C mPa*s 16.900 ASTM D2983
16.900 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1a ASTM D130
1a ASTM D130
Approvals Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L

Recognizing the number...