Search by VIN, truck make, model, type or unit name, or by the part number of any oil:
Oil for Caterpillar, Engines, C7
Caterpillar Model (Engines) to find out what kind of oil is used for it
Caterpillar Engines C7from 2004 to 2010 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.
Power:
Nodes and assemblies
Engine
For engine
RAVENOL NDT Nord Duty Truck SAE 5W-40 is a full synthetic all-season multi-grade engine oil based on PAO, which is used in heavy-duty diesel engines of commercial vehicles, pick-ups and SUVs.
Manufacturer Approved:
Cummins CES 20081, DDC 93K218
Compliance with the requirements:
Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1122103-020
Volume:
1000 L
Vendor code:
1122103-700
RAVENOL NDT Nord Duty Truck SAE 5W-40 can be used in new low-emission engines with exhaust gas after-treatment.
RAVENOL NDT Nord Duty Truck SAE 5W-40 delivers reduced friction, wear and fuel consumption and ensures extended oil change intervals up to 80.000 km in turbo-diesel engines.
RAVENOL NDT Nord Duty Truck SAE 5W-40 improves engine performance, reliability and cleanness thanks to active agents that retain excellent viscosity.
Application instructions
RAVENOL NDT Nord Duty Truck SAE 5W-40 is used in the viscosity grade SAE 5W-40 by engine manufacturers as an all-season, multi-grade engine oil in in heavy duty diesel engines of commercial vehicles with exhaust gas after-treatment.
RAVENOL NDT Nord Duty Truck SAE 5W-4 is the preferred recommendation of manufacturers for turbo diesel engines due to the extended oil change intervals up to 80.000 km.
Characteristics
- an extremely high pressure absorption
- very high oxidation stability
- an excellent aging resistance
- outstanding viscosity temperature characteristics
- high safety reserves also under marginal lubricating conditions
- suitable for extended oil change intervals
- ideally suited for demanding operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | CJ-4, SM |
CJ-4, SM
|
||
| ACEA | E7, E9 |
E7, E9
|
||
| Manufacturer Approved | Cummins CES 20081, DDC 93K218 |
Cummins CES 20081, DDC 93K218
|
||
| Recomendations | Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.45 | DIN 51562-1 |
14.45
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 89.7 | DIN 51562-1 |
89.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 167 | DIN ISO 2909 |
167
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4957 | ASTM D5293 |
4957
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 26.600 | ASTM D4684 |
26.600
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10.4 | ASTM D5800 |
10.4
%
ASTM D5800
|
| tbn | mgKOH/g | 10.1 | ASTM D2896 |
10.1
mgKOH/g
ASTM D2896
|
| Approvals | Chrysler MS-10902, Cummins CES 20081, DDC 93K214, DDC 93K215, DDC 93K218, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Chrysler MS-10902, Cummins CES 20081, DDC 93K214, DDC 93K215, DDC 93K218, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Recommendations | Chrysler MS-10902, DTFR 15C100 (MB 228.31), Detroit Diesel DDC 93K214, Detroit Diesel DDC 93K215, Ford WSS-M2C171-E, MTU Typ 2, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4 |
Chrysler MS-10902, DTFR 15C100 (MB 228.31), Detroit Diesel DDC 93K214, Detroit Diesel DDC 93K215, Ford WSS-M2C171-E, MTU Typ 2, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4
|
- Available packaging
- Product parameters
Volume:
5 L
Vendor code:
1121100-005
1121100-005-01-999
Code:
4014835725652
Volume:
20 L
Vendor code:
1121100-020
1121100-020-01-999
Code:
4014835725621
Volume:
208 L, print
Vendor code:
1121100-D28
1121100-D28-01-888
Code:
4014835725607
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Full synthetic |
Full synthetic
|
For engine
RAVENOL Super Performance Truck SAE 5W-30 is a high alloyed USHPD low friction engine oil for commercial vehicles. Because of the use of synthetic basic oils the viscosity area 5W-30 could be realised. Because of the cold viscosity SAE 5W a definite cold start (low cold start corrosion) and a supply of all lubrication areas is guaranteed as quickly as possible at very low outside temperatures. Extreme stress applications are controlled by the high temperature viscosity SAE 30. Minimized friction loss and wear.
Manufacturer Approved:
Renault RXD
Compliance with the requirements:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122102-001
Volume:
20 L, ecobox
Vendor code:
1122102-B20
Volume:
60 L
Vendor code:
1122102-060
Volume:
1000 L
Vendor code:
1122102-700
Application instructions
RAVENOL Super Performance Truck SAE 5W-30 is a high-performance engine oil for commercial vehicles which can be used the whole year and which is adapted to the new exhaust gas emission rules (also for EURO I, II, III, IV and EURO V engines).
RAVENOL Super Performance Truck SAE 5W-3 is suitable for oil change intervals up to more than 100.000 km according to the manufacturer’s specifications.
Characteristics
- Protection against corrosion
- An excellent oxidation stability
- An excellent high temperature stability
- Excellent detergent and dispersant attributes
- Profitability because of a low fuel consumption
- Long endurance because of a high oxidation stability
- Excellent cold start attributes
- A very good viscosity temperature behaviour
- Low evaporation
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CF, CI-4 |
CF, CI-4
|
||
| ACEA | E4, E7 |
E4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | Renault RXD |
Renault RXD
|
||
| Recomendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3
|
||
| Suitable for | IVECO |
IVECO
|
||
| Density at 20 °C | g/cm³ | 854 | EN ISO 12185 |
854
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.5 | DIN 51562-1 |
11.5
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 69.3 | DIN 51562-1 |
69.3
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 161 | DIN ISO 2909 |
161
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 6000 | ASTM D5293 |
6000
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 16.200 | ASTM D4684 |
16.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10.1 | ASTM D5800 |
10.1
%
ASTM D5800
|
| tbn | mgKOH/g | 13 | ASTM D2896 |
13
mgKOH/g
ASTM D2896
|
| Approvals | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Renault RXD, Scania LDF-3, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Renault RXD, Scania LDF-3, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, IVECO, JASO DH-1, MAN M 3277, MB 228.5, MB 235.28, MTU Typ 3, Mack EO-M Plus, Scania LDF-3, VOLVO VDS-3, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, IVECO, JASO DH-1, MAN M 3277, MB 228.5, MB 235.28, MTU Typ 3, Mack EO-M Plus, Scania LDF-3, VOLVO VDS-3, Voith Retarder B
|
RAVENOL Expert SHPD SAE 5W-30
For engine
RAVENOL Expert SHPD SAE 5W-30 is a high-alloyed SHPD low-friction engine oil for commercial vehicles. Due to the formulation with synthetic base oils, the viscosity range 5W-30 could be realized.
Compliance with the requirements:
Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DDC 93K215, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1121104-001
1121104-001-01-999
Code:
4014835863842
Volume:
5 L
Vendor code:
1121104-005
1121104-005-01-999
Code:
4014835863460
Volume:
7 L
Vendor code:
1121104-007
1121104-007-01-999
Code:
4014835867949
Volume:
10 L
Vendor code:
1121104-010
1121104-010-01-999
Code:
4014835864085
Volume:
20 L
Vendor code:
1121104-020
1121104-020-01-999
Code:
4014835863491
Volume:
20 L, ecobox
Vendor code:
1121104-B20
1121104-B20-01-888
Code:
4014835863606
Volume:
60 L
Vendor code:
1121104-060
1121104-060-01-999
Code:
4014835863583
Volume:
60 L, print
Vendor code:
1121104-D60
Volume:
208 L
Vendor code:
1121104-208
1121104-208-01-999
Code:
4014835863514
Volume:
208 L, print
Vendor code:
1121104-D28
Volume:
1000 L
Vendor code:
1121104-700
RAVENOL Expert SHPD SAE 5W-30 ensures a reliable cold start at low outside temperatures and full lubricity at high operating temperatures thanks to the SAE 5W-30 viscosity range. Friction losses and wear are reduced.
RAVENOL Expert SHPD SAE 5W-30 was designed as SHPD engine oil (Super High Performance Diesel) for use in turbocharged and non-turbocharged engines.
Application instructions
RAVENOL Expert SHPD SAE 5W-30 is a year-round high performance engine oil designed for the truck fleet and buses according to the specified specifications.
RAVENOL Expert SHPD SAE 5W-30 is universally applicable in truck diesel engines with and without turbocharging. It can be used for EURO 4, EURO 5 and EURO 6 engines.Please follow the manufacturer's instructions.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E3, E5, E7 |
A3, B4, E3, E5, E7
|
||
| Recomendations | Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DDC 93K215, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DDC 93K215, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Volvo VDS-3
|
||
| Density at 20 °C | g/cm³ | 851 | EN ISO 12185 |
851
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 74.2 | DIN 51562-1 |
74.2
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 161 | DIN ISO 2909 |
161
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 6340 | ASTM D5293 |
6340
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 25.890 | ASTM D4684 |
25.890
mPa*s
ASTM D4684
|
| Noack Volatility | % | 8.3 | ASTM D5800 |
8.3
%
ASTM D5800
|
| tbn | mgKOH/g | 10.7 | ASTM D2896 |
10.7
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DDC 93K215, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DDC 93K215, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Volvo VDS-3
|
||
| Recommendations | Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Typ 2, Mack EO-M Plus, Mack EO-N, Renault VI RLD-2, VOLVO VDS-3 |
Caterpillar ECF-1a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B110 (MB 228.3), DTFR 15B120 (MB 228.5), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.1, MB 228.3, MB 228.5, MB 229.1, MB 235.28, MTU Typ 2, Mack EO-M Plus, Mack EO-N, Renault VI RLD-2, VOLVO VDS-3
|
Engine oil
RAVENOL Expert SHPD SAE 10W-40 is a easy running engine oil for the use in heavily used induction motors, turbo diesel engines. Selected active ingredients ensure maximum engine cleanliness, even in short-haul traffic. The mixture of unconventional as well as HC basic oils, synthetic components and modern additives guarantees longest oil change intervals and a high corrosion protection at a low oil and fuel consumption.
Manufacturer Approved:
Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
Compliance with the requirements:
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B
- Available packaging
- Product parameters
Volume:
1000 L
Vendor code:
1122105-700
RAVENOL Expert SHPD SAE 10W-40 has an excellent flow behaviour even at low temperatures. The quick reach of critical lubrication points provides a considerable corrosion reduction during the warm-up period. Exclusive additives guarantee the best engine cleanness even at short distances.
Application instructions
RAVENOL Expert SHPD SAE 10W-40 is low-friction long-life engine oil for all kind of diesel engines with and without turbocharging in trucks, buses and machinery. Suitable for the longest oil change intervals.
Characteristics
- Excellent detergent and dispersant characteristics
- Low evaporation
- A high ageing stability
- Protection of reflecting surface formation
- Very good cold start characteristics
- Reduces oil and fuel consumption
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E4, E7 |
A3, B4, E4, E7
|
||
| Manufacturer Approved | Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3 |
Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
|
||
| Recomendations | Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B |
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B
|
||
| Suitable for | DAF, IVECO, YaMZ |
DAF, IVECO, YaMZ
|
||
| Density at 20 °C | g/cm³ | 862 | EN ISO 12185 |
862
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.4 | DIN 51562-1 |
15.4
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 109.7 | DIN 51562-1 |
109.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6480 | ASTM D5293 |
6480
mPa*s
ASTM D5293
|
| Noack Volatility | % | 7.3 | ASTM D5800 |
7.3
%
ASTM D5800
|
| tbn | mgKOH/g | 11 | ASTM D2896 |
11
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF, TEDOM 258-3, VW 500.00, VW 505.00, Voith Retarder B, Volvo VDS-3 |
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF, TEDOM 258-3, VW 500.00, VW 505.00, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Allison C4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, DAF, Global DHD-1, IVECO, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500 00, VW 505 00, Voith Retarder B |
Allison C4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, DAF, Global DHD-1, IVECO, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500 00, VW 505 00, Voith Retarder B
|
RAVENOL Performance Truck SAE 10W-40
Engine oil
RAVENOL Performance Truck SAE 10W-40 is semi-synthetic multi-grade diesel engine oil for highly loaded diesel engines based on MC-systems.
Manufacturer Approved:
DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3
Compliance with the requirements:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122106-001
Volume:
5 L
Vendor code:
1122106-005
Volume:
10 L
Vendor code:
1122106-010
1122106-010-01-999
Code:
4014835737549
Volume:
20 L
Vendor code:
1122106-020
1122106-020-01-999
Code:
4014835737525
Volume:
20 L, ecobox
Vendor code:
1122106-B20
Volume:
60 L
Vendor code:
1122106-060
1122106-060-01-999
Code:
4014835737563
Volume:
60 L, print
Vendor code:
1122106-D60
1122106-D60-01-888
Code:
4014835737532
Volume:
208 L
Vendor code:
1122106-208
1122106-208-01-999
Code:
4014835737587
Volume:
208 L, print
Vendor code:
1122106-D28
1122106-D28-01-888
Code:
4014835737501
Volume:
1000 L
Vendor code:
1122106-700
RAVENOL Performance Truck SAE 10W-40 is low-friction long-life engine oil for all kind of diesel engines with and without turbocharging in trucks, buses and machinery. Suitable for the longest oil change intervals.
Application instructions
RAVENOL Performance Truck SAE 10W-40 has a higher performance than conventional high-performance engine oils. International such oils are called UHPD oils (UHPD = Ultra High Performance Diesel Oil). Regardless of the particular mileage, older diesel engines on RAVENOL Performance Truck SAE 10W-40 should be changed without rinsing.
Characteristics
- High wear protection even under constant load at full throttle
- Reduced fuel consumption by low-friction characteristics
- Quick oil circulation reduces cold-start and warm-up wear
- Protection against bore polishing of cylinder paths
- Reduction of exhaust particles
- Protects against corrosion, even when using diesel fuels with high sulfur content
- Safe protection against deposits and sticking, both under extreme thermal loads and short haul
- Optimum compatibility with seal materials
- Environmentally friendly due longest oil change intervals and low evaporation losses
- Guaranteed extended drain intervals for the long-haul truck or transport
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CF, CI-4 |
CF, CI-4
|
||
| ACEA | E4, E7 |
E4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3 |
DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3
|
||
| Recomendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
|
||
| Density at 20 °C | g/cm³ | 863 | EN ISO 12185 |
863
g/cm³
EN ISO 12185
|
| Color | Dark brown | visual |
Dark brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.3 | DIN 51562-1 |
15.3
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 102.1 | DIN 51562-1 |
102.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 158 | DIN ISO 2909 |
158
DIN ISO 2909
|
|
| tbn | mgKOH/g | 13.2 | ASTM D2896 |
13.2
mgKOH/g
ASTM D2896
|
| Approvals | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), DTFR 15B120, Deutz DQC III-10, Global DHD-1, MAN M 3277, MB 228.5, MB 235.27, MB 235.28, MTU Type 3, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF-2, TEDOM 258-4, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), DTFR 15B120, Deutz DQC III-10, Global DHD-1, MAN M 3277, MB 228.5, MB 235.27, MB 235.28, MTU Type 3, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF-2, TEDOM 258-4, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, JASO DH-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, JASO DH-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
|
RAVENOL EURO VI Truck SAE 10W-40
RAVENOL EURO VI Truck SAE 10W-40 is a top quality semisynthetic fuel economy “Low SAPS” year-round multigrade diesel engine oil based on the latest additive technology combined with very special base oils. This fuel saving lubricant has mainly been developed for heavy diesel engines even under the toughest operation conditions and all the year round. This product is very suitable for EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with a low sulphur content.
Manufacturer Approved:
Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1
Compliance with the requirements:
Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122108-001
1122108-001-01-999
Code:
4014835771314
Volume:
5 L
Vendor code:
1122108-005
1122108-005-01-999
Code:
4014835771352
Volume:
10 L
Vendor code:
1122108-010
1122108-010-01-999
Code:
4014835771345
Volume:
20 L
Vendor code:
1122108-020
1122108-020-01-999
Code:
4014835771321
Volume:
20 L, ecobox
Vendor code:
1122108-B20
Volume:
60 L
Vendor code:
1122108-060
1122108-060-01-999
Code:
4014835771369
Volume:
60 L, print
Vendor code:
1122108-D60
Volume:
208 L
Vendor code:
1122108-208
1122108-208-01-999
Code:
4014835771383
Volume:
208 L, print
Vendor code:
1122108-D28
Volume:
1000 L
Vendor code:
1122108-700
RAVENOL EURO VI Truck SAE 10W-40 is suitable for application in engines with or without particle filters and exhaust catalysts. The SAE 10W-40 viscosity range ensures reliable cold starting at low ambient temperatures and full lubricity at high operating temperatures. The use of shear stable additives guarantees that the SAE grade 10W-40 is maintained throughout the entire oil change interval.
RAVENOL EURO VI Truck SAE 10W-40 is developed as SHPD Motor oil (Super High Performance Diesel) and is suitable for use in engines with or without particle filter and catalytic converter and the special requirements for Low SAPS Technology. Low sulphur-, phosphor- and ash-content.
Application instructions
RAVENOL EURO VI Truck SAE 10W-40 is a year round high performance motor oil, especially designed for economic use in exhaust-optimized engines with exhaust aftertreatment systems.
RAVENOL EURO VI Truck SAE 10W-40 is for universal use in all Diesel-engines with or without turbo-charging and for use in EURO 4, EURO 5 and EURO 6 engines.
Characteristics
- High wear protection
- Excellent oxidation stability
- Excellent high temperature stability
- Excellent detergent and dispersant
- Profitability through low fuel consumption
- Long service life through high oxidation stability
- Excellent cold start performance even at low temperatures, a fast motor-oil penetration
- Very good viscosity-temperature behavior
- neutrality towards seals
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CJ-4, SN |
CJ-4, SN
|
||
| ACEA | E9 |
E9
|
||
| Manufacturer Approved | Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1 |
Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1
|
||
| Recomendations | Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3 |
Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
|
||
| Density at 20 °C | g/cm³ | 856 | EN ISO 12185 |
856
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.8 | DIN 51562-1 |
14.8
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 99.4 | DIN 51562-1 |
99.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6690 | ASTM D5293 |
6690
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -30 °C | mPa*s | 18.000 | ASTM D4684 |
18.000
mPa*s
ASTM D4684
|
| Noack Volatility | % | 6.7 | ASTM D5800 |
6.7
%
ASTM D5800
|
| tbn | mgKOH/g | 10.3 | ASTM D2896 |
10.3
mgKOH/g
ASTM D2896
|
| Approvals | Chrysler MS-10902, Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, MTU Type 3.1, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3 |
Chrysler MS-10902, Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, MTU Type 3.1, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
|
||
| Recommendations | Chrysler MS-10902, Ford WSS-M2C171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Typ 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, VOLVO VDS-3 |
Chrysler MS-10902, Ford WSS-M2C171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Typ 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, VOLVO VDS-3
|
For diesels
RAVENOL Ultra Synthetik Truck SAE 5W-30 is a top quality synthetic fuel economy year-round multigrade diesel engine oil with increased TBN based on the latest additive technology combined with very special base oils.
Manufacturer Approved:
Caterpillar ECF-3, DTFR 15C100, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, MAN M 3677, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5
Compliance with the requirements:
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 13D110 (MB 235.28), Deutz TTCD-Motors, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1121102-B20
Volume:
60 L
Vendor code:
1121102-060
Volume:
208 L, print
Vendor code:
1121102-D28
Volume:
1000 L
Vendor code:
1121102-700
This fuel saving lubricant has mainly been developed for heavy diesel engines even under the toughest operation conditions and all the year round use.
RAVENOL Ultra Synthetik Truck SAE 5W-30 is suitable for application in engines with or without particle filters and exhaust catalysts. The SAE 5W-30 viscosity range ensures reliable cold starting at low ambient temperatures and full lubricity at high operating temperatures. The use of shearstable additives guarantees that the SAE grade 5W-30 is maintained throughout the entire oil change interval.
RAVENOL Ultra Synthetik Truck SAE 5W-30 is developed as SHPD Motoroil (Super High Performance Diesel). Extended oil change intervals according to manufacturer's specifications.
Application instructions
RAVENOL Ultra Synthetik Truck SAE 5W-30 is a year round high performance motor oil, especially designed for economic use in exhaust-optimized engines with exhaust aftertreatment systems. Follow manufacturer's instructions.
Characteristics
- Increased TBN
- High wear protection
- Outstanding oxidation stability
- Excellent high temperature stability
- Outstanding detergent and dispersant properties
- Efficiency through low fuel consumption
- Long service life due to high oxidation stability
- Outstanding cold start behaviour, rapid engine oiling even at low temperatures
- Very good viscosity-temperature behavior
- Neutrality towards seals
- Low oil consumption due to the low evaporation loss through PAO and HC base oils
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CJ-4, CK-4, SN |
CJ-4, CK-4, SN
|
||
| ACEA | E11, E4, E6, E7, E8, E9 |
E11, E4, E6, E7, E8, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | Caterpillar ECF-3, DTFR 15C100, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, MAN M 3677, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5 |
Caterpillar ECF-3, DTFR 15C100, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, MAN M 3677, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5
|
||
| Recomendations | Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 13D110 (MB 235.28), Deutz TTCD-Motors, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG |
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 13D110 (MB 235.28), Deutz TTCD-Motors, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG
|
||
| Density at 20 °C | g/cm³ | 852 | EN ISO 12185 |
852
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 73.6 | DIN 51562-1 |
73.6
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 164 | DIN ISO 2909 |
164
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 5900 | ASTM D5293 |
5900
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 21.500 | ASTM D4684 |
21.500
mPa*s
ASTM D4684
|
| Noack Volatility | % | 11.8 | ASTM D5800 |
11.8
%
ASTM D5800
|
| tbn | mgKOH/g | 13.9 | ASTM D2896 |
13.9
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 13D110 (MB 235.28), DTFR 15C100, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Deutz TTCD-Motors, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3677, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Scania Low Ash, Voith Retarder B, Volvo CNG, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, DTFR 13D110 (MB 235.28), DTFR 15C100, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Deutz TTCD-Motors, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3677, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania LDF-4, Scania Low Ash, Voith Retarder B, Volvo CNG, Volvo VDS-4.5
|
||
| Recommendations | Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DTFR 13D110 (MB 235.28), Detroit Diesel DDC 93K222, Deutz TTCD Motors, Ford WSS-M2C213 A1, IVECO 18-1804 TLS E6, JASO DH-2, Liebherr LH-00-ENG LA, MAN 3297-1, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3575, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, Scania LowAsh, VOLVO CNG, Voith Retarder B |
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DTFR 13D110 (MB 235.28), Detroit Diesel DDC 93K222, Deutz TTCD Motors, Ford WSS-M2C213 A1, IVECO 18-1804 TLS E6, JASO DH-2, Liebherr LH-00-ENG LA, MAN 3297-1, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3575, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, Scania LowAsh, VOLVO CNG, Voith Retarder B
|
For diesels
RAVENOL Low Emission Truck SAE 10W-40 is an all-season semi-synthetic multigrade SHPD engine oil (Super High Performance Diesel), which has been developed to the exhaust emission standards Euro V and Euro VI and is used in extremely heavy duty commercial vehicle diesel engines.
Manufacturer Approved:
DTFR 15C110, DTFR 15C120, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 13D110 (MB 235.28), Deutz DQC IV-10 LA, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Scania Low Ash, Voith Retarder B
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1122109-B20
Volume:
60 L, print
Vendor code:
1122109-D60
Volume:
208 L, print
Vendor code:
1122109-D28
Volume:
1000 L
Vendor code:
1122109-700
RAVENOL Low Emission Truck SAE 10W-40 is suitable for application in exhaust-optimized engines with exhaust gas after treatment.
RAVENOL Low Emission Truck SAE 10W-40 reduces friction, wear and fuel consumption and provides for longer oil change intervals in turbo diesel engines.
RAVENOL Low Emission Truck SAE 10W-40 with shear stable additives improves performance, reliability and cleanliness of the engines.
Application instructions
RAVENOL Low Emission Truck SAE 10W-40 is a year round high performance motor oil, especially designed for economic use in Euro V and Euro VI engines with after treatment systems in the viscosity class SAE 10W -40 heavy duty vehicle diesel engines.
RAVENOL Low Emission Truck SAE 10W-40 is preferred recommended by the extended oil change intervals specified by the manufacturer in turbo diesel engines.
Characteristics
- An extremely high pressure absorption capacity
- Very high oxidation stability
- Excellent resistance to aging
- Excellent viscosity-temperature behavior
- High safety reserves even under boundary lubrication conditions
- Suitable for extended oil change intervals
- Best suitability for difficult operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CJ-4, CK-4 |
CJ-4, CK-4
|
||
| ACEA | E11, E4, E6, E7, E8, E9 |
E11, E4, E6, E7, E8, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | DTFR 15C110, DTFR 15C120, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
DTFR 15C110, DTFR 15C120, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 13D110 (MB 235.28), Deutz DQC IV-10 LA, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Scania Low Ash, Voith Retarder B |
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 13D110 (MB 235.28), Deutz DQC IV-10 LA, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Scania Low Ash, Voith Retarder B
|
||
| Suitable for | DAF |
DAF
|
||
| Density at 20 °C | g/cm³ | 859 | EN ISO 12185 |
859
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.1 | DIN 51562-1 |
14.1
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 90.2 | DIN 51562-1 |
90.2
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 161 | DIN ISO 2909 |
161
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5089 | ASTM D5293 |
5089
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 9.2 | ASTM D2896 |
9.2
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 13D110 (MB 235.28), DTFR 15C110, DTFR 15C120, Deutz DQC IV-10 LA, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Scania Low Ash, Voith Retarder B, Volvo VDS-4 |
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 13D110 (MB 235.28), DTFR 15C110, DTFR 15C120, Deutz DQC IV-10 LA, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Scania Low Ash, Voith Retarder B, Volvo VDS-4
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20081, DAF, DTFR 13D110 (MB 235.28), Detroit Diesel DDC 93K218, Deutz DQC IV-10 LA, JASO DH-2, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, MTU Typ 3.1, Scania LowAsh, Voith Retarder B |
Caterpillar ECF-3, Cummins CES 20081, DAF, DTFR 13D110 (MB 235.28), Detroit Diesel DDC 93K218, Deutz DQC IV-10 LA, JASO DH-2, MAN M 3271-1, MAN M 3477, MAN M 3575, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, MTU Typ 3.1, Scania LowAsh, Voith Retarder B
|
For diesels
RAVENOL SDT Super Duty Truck SAE 10W-40 is a synthetic fuel-saving “low SAPS” truck engine oil formulated using the latest additive technology with very particular base oils. It has been specially developed for diesel engines subjected to the toughest conditions in all seasons. It is extremely well suited to use in EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with up to 500 ppm sulphur content.
Manufacturer Approved:
DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20086, DAF LKW, DDC 93K222, IVECO 18-1804 TLS E9, MAN M 3477, MB 228.51, MTU Type 3.1, Scania Low Ash
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1121120-B20
Volume:
60 L
Vendor code:
1121120-060
Volume:
60 L, print
Vendor code:
1121120-D60
Volume:
208 L, print
Vendor code:
1121120-D28
Volume:
1000 L
Vendor code:
1121120-700
RAVENOL SDT Super Duty Truck SAE 10W-40 can be used in modern trucks and “Tier 4” off-road vehicles and was designed as a SHPD engine oil (Super High Performance Diesel) for use in engines with and without a particle filter and catalytic converter and with specific requirements for Low SAPS technology. The product offers low sulphur, phosphorous and ash content.
RAVENOL SDT Super Duty Truck SAE 10W-40 has particularly high oxidation and shear stability as well as improved air-release properties, allowing it to fulfil and exceed the latest requirements in accordance with API CK-4.
RAVENOL SDT Super Duty Truck SAE 10W-40 offers reliable cold start performance at low outdoor temperatures and full lubricity at high operating temperatures. This reduces friction loss and wear and tear.
RAVENOL SDT Super Duty Truck SAE 10W-40 was licensed as the first European engine oil by the API with the specifications API CK-4 and API CJ-4.
The new API CK-4 specification is suitable for both current and older vehicles. It is backward compatible and can also be used for diesel fuels which contain up to 500 ppm of sulphur.
Application instructions
RAVENOL SDT Super Duty Truck SAE 10W-40 is a high-performance engine oil which can be used all year round and which has been designed to meet the new exhaust gas emissions guidelines. It has been created for vehicles with exhaust gas recirculation systems. Extended oil change intervals in accordance with manufacturer instructions.
RAVENOL SDT Super Duty Truck SAE 10W-40 is particularly suitable for use in a mixed fleet including EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines and therefore offers the ideal solution to reducing the range of products needed. Please follow the manufacturer’s recommendations!
Characteristics
- Very stable and excellent viscosity behavior and high shear stability
- Fuel saving under all operating conditions
- Maintains the efficiency of the exhaust gas purification systems over a very long term
- Power losses caused by diesel particulate filters are prevented and a higher efficiency is achieved
- Low evaporation tendency resulting in low oil consumption
- Extended oil change intervals protect natural resources
- An excellent cold start behaviour
- Low SAPS = Low Sulphated ash, Phosphorous and Sulfur
- Can also be used in many commercial vehicles without diesel particulate filters
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CJ-4, CK-4 |
CJ-4, CK-4
|
||
| ACEA | E11, E6, E7, E8, E9 |
E11, E6, E7, E8, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Manufacturer Approved | DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20086, DAF LKW, DDC 93K222, IVECO 18-1804 TLS E9, MAN M 3477, MB 228.51, MTU Type 3.1, Scania Low Ash |
Caterpillar ECF-3, Cummins CES 20086, DAF LKW, DDC 93K222, IVECO 18-1804 TLS E9, MAN M 3477, MB 228.51, MTU Type 3.1, Scania Low Ash
|
||
| Density at 20 °C | g/cm³ | 859 | EN ISO 12185 |
859
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.9 | DIN 51562-1 |
14.9
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 99.9 | DIN 51562-1 |
99.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6170 | ASTM D5293 |
6170
mPa*s
ASTM D5293
|
| Noack Volatility | % | 9 | ASTM D5800 |
9
%
ASTM D5800
|
| tbn | mgKOH/g | 10.5 | ASTM D2896 |
10.5
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20086, DAF LKW, DDC 93K222, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, IVECO 18-1804 TLS E9, MAN M 3477, MB 228.51, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania Low Ash, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20086, DAF LKW, DDC 93K222, DTFR 15C110, DTFR 15C120, Deutz DQC IV-18 LA, IVECO 18-1804 TLS E9, MAN M 3477, MB 228.51, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Scania Low Ash, Volvo VDS-4.5
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20086, DAF LKW (für verlängerte Intervalle), Detroit Diesel DDC 93K222, IVECO 18-1804 TLS E9, JASO DH-2, MAN M 3477, MB 228.51, MTU Typ 3.1, Scania LowAsh |
Caterpillar ECF-3, Cummins CES 20086, DAF LKW (für verlängerte Intervalle), Detroit Diesel DDC 93K222, IVECO 18-1804 TLS E9, JASO DH-2, MAN M 3477, MB 228.51, MTU Typ 3.1, Scania LowAsh
|
For diesels
RAVENOL UDT Ultra Duty Truck SAE 10W-30 is a synthetic fuel-saving “low SAPS” truck engine oil formulated using the latest additive technology with very particular base oils. It has been specially developed for diesel engines subjected to the toughest conditions in all seasons. It is extremely well suited to use in EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with up to 500 ppm sulphur content.
Manufacturer Approved:
DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1
- Available packaging
- Product parameters
Volume:
20 L, ecobox
Vendor code:
1121110-B20
Volume:
60 L
Vendor code:
1121110-060
Volume:
60 L, print
Vendor code:
1121110-D60
Volume:
208 L, print
Vendor code:
1121110-D28
RAVENOL UDT Ultra Duty Truck SAE 10W-30 can be used in modern trucks and “Tier 4” off-road vehicles and was designed as a SHPD engine oil (Super High Performance Diesel) for use in engines with and without a particle filter and catalytic converter and with specific requirements for Low SAPS technology. The product offers low sulphur, phosphorous and ash content.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 has particularly high oxidation and shear stability as well as improved air-release properties, allowing it to fulfil and exceed the latest requirements in accordance with API CK-4.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 offers reliable cold start performance at low outdoor temperatures and full lubricity at high operating temperatures. This reduces friction loss and wear and tear.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 was licensed as the first European engine oil by the API with the specifications API CK-4 and API CJ-4.
The new API CK-4 specification is suitable for both current and older vehicles. It is backward compatible and can also be used for diesel fuels which contain up to 500 ppm of sulphur.
Application instructions
RAVENOL UDT Ultra Duty Truck SAE 10W-30 is a high-performance engine oil which can be used all year round and which has been designed to meet the new exhaust gas emissions guidelines. It has been created for vehicles with exhaust gas recirculation systems. Extended oil change intervals in accordance with manufacturer instructions.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 is particularly suitable for use in a mixed fleet including EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines and therefore offers the ideal solution to reducing the range of products needed. Please follow the manufacturer’s recommendations!
Characteristics
- Very stable and excellent viscosity behavior and high shear stability
- Fuel savings under all operating conditions
- Maintains the effectiveness of exhaust gas purification systems over a very long service life
- Prevents power losses due to clogged diesel particulate filters, resulting in higher efficiency
- Low evaporation tendency, thus lower oil consumption
- Extended oil change intervals protect natural resources
- Excellent cold-start properties
- Low SAPS = Low sulfated ash, phosphorus, and sulfur
- Can be used in many commercial vehicles, including vehicles without diesel particulate filters
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| Type | Synthetic |
Synthetic
|
||
| API | CI-4, CJ-4, CK-4, SN |
CI-4, CJ-4, CK-4, SN
|
||
| ACEA | E11, E6, E7, E8, E9 |
E11, E6, E7, E8, E9
|
||
| Manufacturer Approved | DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1
|
||
| Density at 20 °C | g/cm³ | 859 | EN ISO 12185 |
859
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 81.5 | DIN 51562-1 |
81.5
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 145 | DIN ISO 2909 |
145
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5300 | ASTM D5293 |
5300
mPa*s
ASTM D5293
|
| Noack Volatility | % | 9.1 | ASTM D5800 |
9.1
%
ASTM D5800
|
| tbn | mgKOH/g | 10.6 | ASTM D2896 |
10.6
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, DTFR 15C110, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, DTFR 15C110, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Typ 3.1 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Typ 3.1
|
RAVENOL Low Emission Truck SAE 10W-30
For engine
RAVENOL Low Emission Truck SAE 10W-30 is an all-season multigrade SHPD engine oil(Super High Performance Diesel), which has been developed to the exhaust emission standards Euro V and Euro VI and is used in extremely heavy duty commercial vehicle diesel engines.
Compliance with the requirements:
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 15C110 (MB 228.51), Deutz DQC IV-10 LA, MAN M 3677, MB 228.51, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122111-001
Volume:
5 L
Vendor code:
1122111-005
Volume:
10 L
Vendor code:
1122111-010
Volume:
20 L
Vendor code:
1122111-020
1122111-020-01-999
Code:
4014835841482
Volume:
20 L, ecobox
Vendor code:
1122111-B20
Volume:
60 L
Vendor code:
1122111-060
1122111-060-01-999
Code:
4014835841505
Volume:
208 L
Vendor code:
1122111-208
1122111-208-01-999
Code:
4014835841529
Volume:
208 L, print
Vendor code:
1122111-D28
Volume:
1000 L
Vendor code:
1122111-700
RAVENOL Low Emission Truck SAE 10W-30 is suitable for application in new exhaust-optimized engines with exhaust gas after treatment.
RAVENOL Low Emission Truck SAE 10W-30 reduces friction, wear and fuel consumption and provides for longer oil change intervals in turbo diesel engines.
RAVENOL Low Emission Truck SAE 10W-30 with shear stable additives improves performance, reliability and cleanliness of the engines.
Application instructions
RAVENOL Low Emission Truck SAE 10W-3 is a year round high performance motor oil, especially designed for economic use in Euro V and Euro VI engines with after treatment systems in the viscosity class SAE 10W -40 heavy duty vehicle diesel engines.
RAVENOL Low Emission Truck SAE 10W-3 is preferred recommended by the extended oil change intervals specified by the manufacturer in turbo diesel engines.
Characteristics
- Extremely high pressure absorption capacity
- Very high oxidation stability
- Excellent aging stability
- Excellent viscosity and temperature behaviour
- High security reserves even under limited lubrication circumstances
- Suitable for extended oil change intervals
- Suitable for heavy operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CI-4, CJ-4, CK-4 |
CI-4, CJ-4, CK-4
|
||
| ACEA | E11, E6, E7, E9 |
E11, E6, E7, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Recomendations | Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 15C110 (MB 228.51), Deutz DQC IV-10 LA, MAN M 3677, MB 228.51, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 15C110 (MB 228.51), Deutz DQC IV-10 LA, MAN M 3677, MB 228.51, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Density at 20 °C | g/cm³ | 863 | EN ISO 12185 |
863
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 12.3 | DIN 51562-1 |
12.3
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 77.6 | DIN 51562-1 |
77.6
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 5863 | ASTM D5293 |
5863
mPa*s
ASTM D5293
|
| tbn | mgKOH/g | 8.2 | ASTM D2896 |
8.2
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 15C110 (MB 228.51), Deutz DQC IV-10 LA, MAN M 3677, MB 228.51, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Caterpillar ECF-3, Cummins CES 20081, DDC 93K218, DTFR 15C110 (MB 228.51), Deutz DQC IV-10 LA, MAN M 3677, MB 228.51, MTU Type 3.1, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Recommendations | Caterpillar ECF-3, Cummins CES 20081, DTFR 15C110 (MB 228.51), Detroit Diesel DDC 93K218, Deutz DQC IV-10 LA, JASO DH-2, MAN M 3677, MB 228.51, MTU Typ 3.1, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4 (STD 417-0001) |
Caterpillar ECF-3, Cummins CES 20081, DTFR 15C110 (MB 228.51), Detroit Diesel DDC 93K218, Deutz DQC IV-10 LA, JASO DH-2, MAN M 3677, MB 228.51, MTU Typ 3.1, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4 (STD 417-0001)
|
RAVENOL Turbo Plus SHPD SAE 10W-30
For mixed park
RAVENOL Turbo Plus SHPD SAE 10W-30 is high performance multi-grade oil for use in petrol and diesel engines including turbo versions.
Compliance with the requirements:
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1123105-001
Volume:
10 L
Vendor code:
1123105-010
1123105-010-01-999
Code:
4014835737747
Volume:
20 L
Vendor code:
1123105-020
1123105-020-01-999
Code:
4014835637726
Volume:
20 L, ecobox
Vendor code:
1123105-B20
Volume:
60 L
Vendor code:
1123105-060
1123105-060-01-999
Code:
4014835737761
Volume:
208 L
Vendor code:
1123105-208
1123105-208-01-999
Code:
4014835737785
Volume:
1000 L
Vendor code:
1123105-700
Volume:
5 L
Vendor code:
1123105-005
1123105-005-01-999
RAVENOL Turbo Plus SHPD SAE 10W-30 meets the requirements of SAE-Class 10W-30. This adjustment of viscosity also ensures a good lubricating film at high temperatures.
RAVENOL Turbo Plus SHPD SAE 10W-30 is particularly suitable for engines with already high performance.
Application instructions
RAVENOL Turbo Plus SHPD SAE 10W-30 is approved, tried and tested for aggregates specifying:
Specifications: API CI-4/ SL, ACEA E7, E5, E3, ACEA A3/B4
Approval: YaMZ
Recommendations: Caterpillar ECF-2, TO-2; Cummins CES 20071, -72, -76, -77, -78; DAF; DDC 93K215; Deutz DQC III-10; Global DHD-1; JASO DH-1; Mack EO-N; MAN M 3275-1; MB 228.3;MTU Type 2, MTU Type 3; Renault RLD, Renault VI RLD-2; Volvo VDS 3.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| Type | Mineral |
Mineral
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E3, E5, E7 |
A3, B4, E3, E5, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Recomendations | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
|
||
| Suitable for | DAF, YaMZ |
DAF, YaMZ
|
||
| Density at 20 °C | g/cm³ | 865 | EN ISO 12185 |
865
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 74.9 | DIN 51562-1 |
74.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 156 | DIN ISO 2909 |
156
DIN ISO 2909
|
|
| tbn | mgKOH/g | 10.2 | ASTM D2896 |
10.2
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
|
||
| Recommendations | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, DTFR 15B110 (MB 228.3), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, JASO DH-1, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Mack EO-N, Renault RLD, Renault VI RLD-2, VOLVO VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, DTFR 15B110 (MB 228.3), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, JASO DH-1, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Mack EO-N, Renault RLD, Renault VI RLD-2, VOLVO VDS-3
|
For mixed fleet
RAVENOL Turbo plus SHPD SAE 15W-40 is SHPD-motor oil for the mixed automobile fleet.
Manufacturer Approved:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
Compliance with the requirements:
Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1123115-001
1123115-001-01-999
Volume:
4 L
Vendor code:
1123115-004
Volume:
7 L
Vendor code:
1123115-007
1123115-007-01-999
Volume:
1000 L
Vendor code:
1123115-700
1123115-700-01-999
RAVENOL Turbo plus SHPD SAE 15W-40 can be used for diesel and petrol engines, also with turbochargers.
RAVENOL Turbo plus SHPD SAE 15W-40 has been especially developed for extended oil change intervals, according to manufacturer’s recommendations.
Application instructions
RAVENOL Turbo-Plus SHPD SAE 15W-40 is recommended by the engine manufacturers for extended oil change intervals as SAE 15W-40 multigrade engine oil in heavy duty commercial vehicle diesel engines.
RAVENOL Turbo-Plus SHPD SAE 15W-40 is the preferred use for extended oil life in turbo charged diesel engines according to manufacturer’s recommendations.
Characteristics
- Extremely high pressure absorption capacity
- Very high oxidation stability
- Excellent aging stability
- Excellent viscosity and temperature behaviour
- High security reserves even under limited lubrication circumstances
- Suitable for extended oil change intervals
- Suitable for heavy operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-40 |
15W-40
|
||
| Type | Mineral |
Mineral
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E7 |
A3, B4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
|
||
| Recomendations | Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C |
Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
|
||
| Suitable for | IVECO, Steyr Motor GAZ 560, YaMZ |
IVECO, Steyr Motor GAZ 560, YaMZ
|
||
| Density at 20 °C | g/cm³ | 870 | EN ISO 12185 |
870
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 15 | DIN 51562-1 |
15
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 115.7 | DIN 51562-1 |
115.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 134 | DIN ISO 2909 |
134
DIN ISO 2909
|
|
| tbn | mgKOH/g | 10.5 | ASTM D2896 |
10.5
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Caterpillar TO-2, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M, Mack EO-M Plus, Renault RLD, Renault RLD-2, Scania LDF-2, TEDOM 258-3, Volvo VDS-3, ZF TE-ML 07C |
Allison C-4, Caterpillar TO-2, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M, Mack EO-M Plus, Renault RLD, Renault RLD-2, Scania LDF-2, TEDOM 258-3, Volvo VDS-3, ZF TE-ML 07C
|
||
| Recommendations | Allison C4, Caterpillar TO-2, Global DHD-1, IVECO, JASO DH-1, John Deere JDQ-78A, MAN M 3275-1 (Multigrades), MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C |
Allison C4, Caterpillar TO-2, Global DHD-1, IVECO, JASO DH-1, John Deere JDQ-78A, MAN M 3275-1 (Multigrades), MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
|
Engine
For engine
RAVENOL NDT Nord Duty Truck SAE 5W-40 is a full synthetic all-season multi-grade engine oil based on PAO, which is used in heavy-duty diesel engines of commercial vehicles, pick-ups and SUVs.
Manufacturer Approved:
Cummins CES 20081, DDC 93K218
Compliance with the requirements:
Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
- Available packaging
- Product parameters
Volume:
20 L
Vendor code:
1122103-020
Volume:
1000 L
Vendor code:
1122103-700
RAVENOL NDT Nord Duty Truck SAE 5W-40 can be used in new low-emission engines with exhaust gas after-treatment.
RAVENOL NDT Nord Duty Truck SAE 5W-40 delivers reduced friction, wear and fuel consumption and ensures extended oil change intervals up to 80.000 km in turbo-diesel engines.
RAVENOL NDT Nord Duty Truck SAE 5W-40 improves engine performance, reliability and cleanness thanks to active agents that retain excellent viscosity.
Application instructions
RAVENOL NDT Nord Duty Truck SAE 5W-40 is used in the viscosity grade SAE 5W-40 by engine manufacturers as an all-season, multi-grade engine oil in in heavy duty diesel engines of commercial vehicles with exhaust gas after-treatment.
RAVENOL NDT Nord Duty Truck SAE 5W-4 is the preferred recommendation of manufacturers for turbo diesel engines due to the extended oil change intervals up to 80.000 km.
Characteristics
- an extremely high pressure absorption
- very high oxidation stability
- an excellent aging resistance
- outstanding viscosity temperature characteristics
- high safety reserves also under marginal lubricating conditions
- suitable for extended oil change intervals
- ideally suited for demanding operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-40 |
5W-40
|
||
| Type | Full synthetic |
Full synthetic
|
||
| API | CJ-4, SM |
CJ-4, SM
|
||
| ACEA | E7, E9 |
E7, E9
|
||
| Manufacturer Approved | Cummins CES 20081, DDC 93K218 |
Cummins CES 20081, DDC 93K218
|
||
| Recomendations | Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Chrysler MS-10902, DDC 93K214, DDC 93K215, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Density at 20 °C | g/cm³ | 849 | EN ISO 12185 |
849
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.45 | DIN 51562-1 |
14.45
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 89.7 | DIN 51562-1 |
89.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 167 | DIN ISO 2909 |
167
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 4957 | ASTM D5293 |
4957
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 26.600 | ASTM D4684 |
26.600
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10.4 | ASTM D5800 |
10.4
%
ASTM D5800
|
| tbn | mgKOH/g | 10.1 | ASTM D2896 |
10.1
mgKOH/g
ASTM D2896
|
| Approvals | Chrysler MS-10902, Cummins CES 20081, DDC 93K214, DDC 93K215, DDC 93K218, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4 |
Chrysler MS-10902, Cummins CES 20081, DDC 93K214, DDC 93K215, DDC 93K218, DTFR 15C100 (MB 228.31), Ford WSS-M2C 171-E, MTU Type 2, Mack EO-O Premium Plus, Renault RLD-3, Volvo VDS-4
|
||
| Recommendations | Chrysler MS-10902, DTFR 15C100 (MB 228.31), Detroit Diesel DDC 93K214, Detroit Diesel DDC 93K215, Ford WSS-M2C171-E, MTU Typ 2, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4 |
Chrysler MS-10902, DTFR 15C100 (MB 228.31), Detroit Diesel DDC 93K214, Detroit Diesel DDC 93K215, Ford WSS-M2C171-E, MTU Typ 2, Mack EO-O PP (Premium Plus), Renault VI RLD-3, VOLVO VDS-4
|
- Available packaging
- Product parameters
Volume:
5 L
Vendor code:
1121100-005
1121100-005-01-999
Code:
4014835725652
Volume:
20 L
Vendor code:
1121100-020
1121100-020-01-999
Code:
4014835725621
Volume:
208 L, print
Vendor code:
1121100-D28
1121100-D28-01-888
Code:
4014835725607
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Full synthetic |
Full synthetic
|
For engine
RAVENOL Super Performance Truck SAE 5W-30 is a high alloyed USHPD low friction engine oil for commercial vehicles. Because of the use of synthetic basic oils the viscosity area 5W-30 could be realised. Because of the cold viscosity SAE 5W a definite cold start (low cold start corrosion) and a supply of all lubrication areas is guaranteed as quickly as possible at very low outside temperatures. Extreme stress applications are controlled by the high temperature viscosity SAE 30. Minimized friction loss and wear.
Manufacturer Approved:
Renault RXD
Compliance with the requirements:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122102-001
Volume:
20 L, ecobox
Vendor code:
1122102-B20
Volume:
60 L
Vendor code:
1122102-060
Volume:
1000 L
Vendor code:
1122102-700
Application instructions
RAVENOL Super Performance Truck SAE 5W-30 is a high-performance engine oil for commercial vehicles which can be used the whole year and which is adapted to the new exhaust gas emission rules (also for EURO I, II, III, IV and EURO V engines).
RAVENOL Super Performance Truck SAE 5W-3 is suitable for oil change intervals up to more than 100.000 km according to the manufacturer’s specifications.
Characteristics
- Protection against corrosion
- An excellent oxidation stability
- An excellent high temperature stability
- Excellent detergent and dispersant attributes
- Profitability because of a low fuel consumption
- Long endurance because of a high oxidation stability
- Excellent cold start attributes
- A very good viscosity temperature behaviour
- Low evaporation
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 5W-30 |
5W-30
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CF, CI-4 |
CF, CI-4
|
||
| ACEA | E4, E7 |
E4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | Renault RXD |
Renault RXD
|
||
| Recomendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Scania LDF-3, Voith Retarder B, Volvo VDS-3
|
||
| Suitable for | IVECO |
IVECO
|
||
| Density at 20 °C | g/cm³ | 854 | EN ISO 12185 |
854
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.5 | DIN 51562-1 |
11.5
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 69.3 | DIN 51562-1 |
69.3
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 161 | DIN ISO 2909 |
161
DIN ISO 2909
|
|
| CCS Viscosity at -30 °C | mPa*s | 6000 | ASTM D5293 |
6000
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 16.200 | ASTM D4684 |
16.200
mPa*s
ASTM D4684
|
| Noack Volatility | % | 10.1 | ASTM D5800 |
10.1
%
ASTM D5800
|
| tbn | mgKOH/g | 13 | ASTM D2896 |
13
mgKOH/g
ASTM D2896
|
| Approvals | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Renault RXD, Scania LDF-3, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, MAN M 3277, MB 228.5, MB 235.28, MTU Type 3, Mack EO-M Plus, Renault RXD, Scania LDF-3, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, IVECO, JASO DH-1, MAN M 3277, MB 228.5, MB 235.28, MTU Typ 3, Mack EO-M Plus, Scania LDF-3, VOLVO VDS-3, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 13D110 (MB 235.28), DTFR 15B120 (MB 228.5), Global DHD-1, IVECO, JASO DH-1, MAN M 3277, MB 228.5, MB 235.28, MTU Typ 3, Mack EO-M Plus, Scania LDF-3, VOLVO VDS-3, Voith Retarder B
|
Engine oil
RAVENOL Expert SHPD SAE 10W-40 is a easy running engine oil for the use in heavily used induction motors, turbo diesel engines. Selected active ingredients ensure maximum engine cleanliness, even in short-haul traffic. The mixture of unconventional as well as HC basic oils, synthetic components and modern additives guarantees longest oil change intervals and a high corrosion protection at a low oil and fuel consumption.
Manufacturer Approved:
Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
Compliance with the requirements:
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B
- Available packaging
- Product parameters
Volume:
1000 L
Vendor code:
1122105-700
RAVENOL Expert SHPD SAE 10W-40 has an excellent flow behaviour even at low temperatures. The quick reach of critical lubrication points provides a considerable corrosion reduction during the warm-up period. Exclusive additives guarantee the best engine cleanness even at short distances.
Application instructions
RAVENOL Expert SHPD SAE 10W-40 is low-friction long-life engine oil for all kind of diesel engines with and without turbocharging in trucks, buses and machinery. Suitable for the longest oil change intervals.
Characteristics
- Excellent detergent and dispersant characteristics
- Low evaporation
- A high ageing stability
- Protection of reflecting surface formation
- Very good cold start characteristics
- Reduces oil and fuel consumption
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E4, E7 |
A3, B4, E4, E7
|
||
| Manufacturer Approved | Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3 |
Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
|
||
| Recomendations | Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B |
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500.00, VW 505.00, Voith Retarder B
|
||
| Suitable for | DAF, IVECO, YaMZ |
DAF, IVECO, YaMZ
|
||
| Density at 20 °C | g/cm³ | 862 | EN ISO 12185 |
862
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.4 | DIN 51562-1 |
15.4
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 109.7 | DIN 51562-1 |
109.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6480 | ASTM D5293 |
6480
mPa*s
ASTM D5293
|
| Noack Volatility | % | 7.3 | ASTM D5800 |
7.3
%
ASTM D5800
|
| tbn | mgKOH/g | 11 | ASTM D2896 |
11
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF, TEDOM 258-3, VW 500.00, VW 505.00, Voith Retarder B, Volvo VDS-3 |
Allison C-4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF, TEDOM 258-3, VW 500.00, VW 505.00, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Allison C4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, DAF, Global DHD-1, IVECO, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500 00, VW 505 00, Voith Retarder B |
Allison C4, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, DAF, Global DHD-1, IVECO, MAN M 3275-1, MB 228.3, MB 229.1, Scania LDF, VW 500 00, VW 505 00, Voith Retarder B
|
RAVENOL Performance Truck SAE 10W-40
Engine oil
RAVENOL Performance Truck SAE 10W-40 is semi-synthetic multi-grade diesel engine oil for highly loaded diesel engines based on MC-systems.
Manufacturer Approved:
DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3
Compliance with the requirements:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122106-001
Volume:
5 L
Vendor code:
1122106-005
Volume:
10 L
Vendor code:
1122106-010
1122106-010-01-999
Code:
4014835737549
Volume:
20 L
Vendor code:
1122106-020
1122106-020-01-999
Code:
4014835737525
Volume:
20 L, ecobox
Vendor code:
1122106-B20
Volume:
60 L
Vendor code:
1122106-060
1122106-060-01-999
Code:
4014835737563
Volume:
60 L, print
Vendor code:
1122106-D60
1122106-D60-01-888
Code:
4014835737532
Volume:
208 L
Vendor code:
1122106-208
1122106-208-01-999
Code:
4014835737587
Volume:
208 L, print
Vendor code:
1122106-D28
1122106-D28-01-888
Code:
4014835737501
Volume:
1000 L
Vendor code:
1122106-700
RAVENOL Performance Truck SAE 10W-40 is low-friction long-life engine oil for all kind of diesel engines with and without turbocharging in trucks, buses and machinery. Suitable for the longest oil change intervals.
Application instructions
RAVENOL Performance Truck SAE 10W-40 has a higher performance than conventional high-performance engine oils. International such oils are called UHPD oils (UHPD = Ultra High Performance Diesel Oil). Regardless of the particular mileage, older diesel engines on RAVENOL Performance Truck SAE 10W-40 should be changed without rinsing.
Characteristics
- High wear protection even under constant load at full throttle
- Reduced fuel consumption by low-friction characteristics
- Quick oil circulation reduces cold-start and warm-up wear
- Protection against bore polishing of cylinder paths
- Reduction of exhaust particles
- Protects against corrosion, even when using diesel fuels with high sulfur content
- Safe protection against deposits and sticking, both under extreme thermal loads and short haul
- Optimum compatibility with seal materials
- Environmentally friendly due longest oil change intervals and low evaporation losses
- Guaranteed extended drain intervals for the long-haul truck or transport
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CF, CI-4 |
CF, CI-4
|
||
| ACEA | E4, E7 |
E4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3 |
DTFR 15B120, Deutz DQC III-10, MAN M 3277, MTU Type 3, Mack EO-N, Renault RLD-2, TEDOM 258-4, Volvo VDS-3
|
||
| Recomendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
|
||
| Density at 20 °C | g/cm³ | 863 | EN ISO 12185 |
863
g/cm³
EN ISO 12185
|
| Color | Dark brown | visual |
Dark brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 15.3 | DIN 51562-1 |
15.3
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 102.1 | DIN 51562-1 |
102.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 158 | DIN ISO 2909 |
158
DIN ISO 2909
|
|
| tbn | mgKOH/g | 13.2 | ASTM D2896 |
13.2
mgKOH/g
ASTM D2896
|
| Approvals | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), DTFR 15B120, Deutz DQC III-10, Global DHD-1, MAN M 3277, MB 228.5, MB 235.27, MB 235.28, MTU Type 3, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF-2, TEDOM 258-4, Voith Retarder B, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), DTFR 15B120, Deutz DQC III-10, Global DHD-1, MAN M 3277, MB 228.5, MB 235.27, MB 235.28, MTU Type 3, Mack EO-M Plus, Mack EO-N, Renault RLD-2, Scania LDF-2, TEDOM 258-4, Voith Retarder B, Volvo VDS-3
|
||
| Recommendations | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, JASO DH-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF HP-1, DAF HP-2, DTFR 13D100 (MB 235.27), DTFR 13D110 (MB 235.28), Global DHD-1, JASO DH-1, MB 228.5, MB 235.27, MB 235.28, Mack EO-M Plus, Scania LDF-2, Voith Retarder B
|
RAVENOL EURO VI Truck SAE 10W-40
RAVENOL EURO VI Truck SAE 10W-40 is a top quality semisynthetic fuel economy “Low SAPS” year-round multigrade diesel engine oil based on the latest additive technology combined with very special base oils. This fuel saving lubricant has mainly been developed for heavy diesel engines even under the toughest operation conditions and all the year round. This product is very suitable for EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with a low sulphur content.
Manufacturer Approved:
Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1
Compliance with the requirements:
Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1122108-001
1122108-001-01-999
Code:
4014835771314
Volume:
5 L
Vendor code:
1122108-005
1122108-005-01-999
Code:
4014835771352
Volume:
10 L
Vendor code:
1122108-010
1122108-010-01-999
Code:
4014835771345
Volume:
20 L
Vendor code:
1122108-020
1122108-020-01-999
Code:
4014835771321
Volume:
20 L, ecobox
Vendor code:
1122108-B20
Volume:
60 L
Vendor code:
1122108-060
1122108-060-01-999
Code:
4014835771369
Volume:
60 L, print
Vendor code:
1122108-D60
Volume:
208 L
Vendor code:
1122108-208
1122108-208-01-999
Code:
4014835771383
Volume:
208 L, print
Vendor code:
1122108-D28
Volume:
1000 L
Vendor code:
1122108-700
RAVENOL EURO VI Truck SAE 10W-40 is suitable for application in engines with or without particle filters and exhaust catalysts. The SAE 10W-40 viscosity range ensures reliable cold starting at low ambient temperatures and full lubricity at high operating temperatures. The use of shear stable additives guarantees that the SAE grade 10W-40 is maintained throughout the entire oil change interval.
RAVENOL EURO VI Truck SAE 10W-40 is developed as SHPD Motor oil (Super High Performance Diesel) and is suitable for use in engines with or without particle filter and catalytic converter and the special requirements for Low SAPS Technology. Low sulphur-, phosphor- and ash-content.
Application instructions
RAVENOL EURO VI Truck SAE 10W-40 is a year round high performance motor oil, especially designed for economic use in exhaust-optimized engines with exhaust aftertreatment systems.
RAVENOL EURO VI Truck SAE 10W-40 is for universal use in all Diesel-engines with or without turbo-charging and for use in EURO 4, EURO 5 and EURO 6 engines.
Characteristics
- High wear protection
- Excellent oxidation stability
- Excellent high temperature stability
- Excellent detergent and dispersant
- Profitability through low fuel consumption
- Long service life through high oxidation stability
- Excellent cold start performance even at low temperatures, a fast motor-oil penetration
- Very good viscosity-temperature behavior
- neutrality towards seals
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| Type | Semi-synthetic |
Semi-synthetic
|
||
| API | CJ-4, SN |
CJ-4, SN
|
||
| ACEA | E9 |
E9
|
||
| Manufacturer Approved | Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1 |
Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, MTU Type 3.1
|
||
| Recomendations | Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3 |
Chrysler MS-10902, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
|
||
| Density at 20 °C | g/cm³ | 856 | EN ISO 12185 |
856
g/cm³
EN ISO 12185
|
| Color | Brown | visual |
Brown
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.8 | DIN 51562-1 |
14.8
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 99.4 | DIN 51562-1 |
99.4
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 155 | DIN ISO 2909 |
155
DIN ISO 2909
|
|
| CCS Viscosity at -25 °C | mPa*s | 6690 | ASTM D5293 |
6690
mPa*s
ASTM D5293
|
| Low Temp. Pumping viscosity (MRV) at -30 °C | mPa*s | 18.000 | ASTM D4684 |
18.000
mPa*s
ASTM D4684
|
| Noack Volatility | % | 6.7 | ASTM D5800 |
6.7
%
ASTM D5800
|
| tbn | mgKOH/g | 10.3 | ASTM D2896 |
10.3
mgKOH/g
ASTM D2896
|
| Approvals | Chrysler MS-10902, Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, MTU Type 3.1, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3 |
Chrysler MS-10902, Cummins CES 20076, Cummins CES 20077, DTFR 15C110, Deutz DQC IV-10 LA, Ford WSS-M2C 171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Type 3, MTU Type 3.1, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, Volvo VDS-3
|
||
| Recommendations | Chrysler MS-10902, Ford WSS-M2C171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Typ 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, VOLVO VDS-3 |
Chrysler MS-10902, Ford WSS-M2C171-E, MAN M 3271-1, MAN M 3477, MB 228.51, MTU Typ 3, Mack EO-N, Renault RLD-2, Renault RXD, Scania LDF-2, VOLVO VDS-3
|
RAVENOL Turbo Plus SHPD SAE 10W-30
For mixed park
RAVENOL Turbo Plus SHPD SAE 10W-30 is high performance multi-grade oil for use in petrol and diesel engines including turbo versions.
Compliance with the requirements:
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1123105-001
Volume:
10 L
Vendor code:
1123105-010
1123105-010-01-999
Code:
4014835737747
Volume:
20 L
Vendor code:
1123105-020
1123105-020-01-999
Code:
4014835637726
Volume:
20 L, ecobox
Vendor code:
1123105-B20
Volume:
60 L
Vendor code:
1123105-060
1123105-060-01-999
Code:
4014835737761
Volume:
208 L
Vendor code:
1123105-208
1123105-208-01-999
Code:
4014835737785
Volume:
1000 L
Vendor code:
1123105-700
Volume:
5 L
Vendor code:
1123105-005
1123105-005-01-999
RAVENOL Turbo Plus SHPD SAE 10W-30 meets the requirements of SAE-Class 10W-30. This adjustment of viscosity also ensures a good lubricating film at high temperatures.
RAVENOL Turbo Plus SHPD SAE 10W-30 is particularly suitable for engines with already high performance.
Application instructions
RAVENOL Turbo Plus SHPD SAE 10W-30 is approved, tried and tested for aggregates specifying:
Specifications: API CI-4/ SL, ACEA E7, E5, E3, ACEA A3/B4
Approval: YaMZ
Recommendations: Caterpillar ECF-2, TO-2; Cummins CES 20071, -72, -76, -77, -78; DAF; DDC 93K215; Deutz DQC III-10; Global DHD-1; JASO DH-1; Mack EO-N; MAN M 3275-1; MB 228.3;MTU Type 2, MTU Type 3; Renault RLD, Renault VI RLD-2; Volvo VDS 3.
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| Type | Mineral |
Mineral
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E3, E5, E7 |
A3, B4, E3, E5, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Recomendations | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
|
||
| Suitable for | DAF, YaMZ |
DAF, YaMZ
|
||
| Density at 20 °C | g/cm³ | 865 | EN ISO 12185 |
865
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 74.9 | DIN 51562-1 |
74.9
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 156 | DIN ISO 2909 |
156
DIN ISO 2909
|
|
| tbn | mgKOH/g | 10.2 | ASTM D2896 |
10.2
mgKOH/g
ASTM D2896
|
| Approvals | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, DTFR 15B110 (MB 228.3), Deutz DQC III-10, Global DHD-1, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Mack EO-N, Renault RLD, Renault RLD-2, Volvo VDS-3
|
||
| Recommendations | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, DTFR 15B110 (MB 228.3), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, JASO DH-1, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Mack EO-N, Renault RLD, Renault VI RLD-2, VOLVO VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, DTFR 15B110 (MB 228.3), Detroit Diesel DDC 93K215, Deutz DQC III-10, Global DHD-1, JASO DH-1, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Mack EO-N, Renault RLD, Renault VI RLD-2, VOLVO VDS-3
|
For mixed fleet
RAVENOL Turbo plus SHPD SAE 15W-40 is SHPD-motor oil for the mixed automobile fleet.
Manufacturer Approved:
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
Compliance with the requirements:
Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1123115-001
1123115-001-01-999
Volume:
4 L
Vendor code:
1123115-004
Volume:
7 L
Vendor code:
1123115-007
1123115-007-01-999
Volume:
1000 L
Vendor code:
1123115-700
1123115-700-01-999
RAVENOL Turbo plus SHPD SAE 15W-40 can be used for diesel and petrol engines, also with turbochargers.
RAVENOL Turbo plus SHPD SAE 15W-40 has been especially developed for extended oil change intervals, according to manufacturer’s recommendations.
Application instructions
RAVENOL Turbo-Plus SHPD SAE 15W-40 is recommended by the engine manufacturers for extended oil change intervals as SAE 15W-40 multigrade engine oil in heavy duty commercial vehicle diesel engines.
RAVENOL Turbo-Plus SHPD SAE 15W-40 is the preferred use for extended oil life in turbo charged diesel engines according to manufacturer’s recommendations.
Characteristics
- Extremely high pressure absorption capacity
- Very high oxidation stability
- Excellent aging stability
- Excellent viscosity and temperature behaviour
- High security reserves even under limited lubrication circumstances
- Suitable for extended oil change intervals
- Suitable for heavy operating conditions
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 15W-40 |
15W-40
|
||
| Type | Mineral |
Mineral
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E7 |
A3, B4, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Manufacturer Approved | Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3 |
Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, MTU Type 2, Renault RLD, Renault RLD-2, TEDOM 258-3, Volvo VDS-3
|
||
| Recomendations | Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C |
Allison C-4, Caterpillar TO-2, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
|
||
| Suitable for | IVECO, Steyr Motor GAZ 560, YaMZ |
IVECO, Steyr Motor GAZ 560, YaMZ
|
||
| Density at 20 °C | g/cm³ | 870 | EN ISO 12185 |
870
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 15 | DIN 51562-1 |
15
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 115.7 | DIN 51562-1 |
115.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 134 | DIN ISO 2909 |
134
DIN ISO 2909
|
|
| tbn | mgKOH/g | 10.5 | ASTM D2896 |
10.5
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Caterpillar TO-2, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M, Mack EO-M Plus, Renault RLD, Renault RLD-2, Scania LDF-2, TEDOM 258-3, Volvo VDS-3, ZF TE-ML 07C |
Allison C-4, Caterpillar TO-2, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DTFR 15B110, Deutz DQC III-10, Global DHD-1, John Deere JDQ-78 A, MAN M 3275-1, MB 228.3, MB 229.1, MTU Type 2, Mack EO-M, Mack EO-M Plus, Renault RLD, Renault RLD-2, Scania LDF-2, TEDOM 258-3, Volvo VDS-3, ZF TE-ML 07C
|
||
| Recommendations | Allison C4, Caterpillar TO-2, Global DHD-1, IVECO, JASO DH-1, John Deere JDQ-78A, MAN M 3275-1 (Multigrades), MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C |
Allison C4, Caterpillar TO-2, Global DHD-1, IVECO, JASO DH-1, John Deere JDQ-78A, MAN M 3275-1 (Multigrades), MB 228.3, MB 229.1, Mack EO-M, Mack EO-M Plus, Scania LDF-2, ZF TE-ML 07C
|
RAVENOL STOU SAE 10W-30
For tractors
RAVENOL STOU SAE 10W-30 is a multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.
Compliance with the requirements:
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
- Available packaging
- Product parameters
Volume:
5 L
Vendor code:
1310100-005
Volume:
20 L
Vendor code:
1310100-020
1310100-020-01-999
Code:
4014835739529
Volume:
20 L, ecobox
Vendor code:
1310100-B20
Volume:
60 L
Vendor code:
1310100-060
1310100-060-01-999
Code:
4014835739567
Volume:
208 L
Vendor code:
1310100-208
1310100-208-01-999
Code:
4014835739581
Volume:
1000 L
Vendor code:
1310100-700
RAVENOL STOU SAE 10W-30 meets the recommendations of all well known tractor manufacturers and is equal to use in engines, transmissions and hydraulic systems of modern tractors. Ensures trouble-free operation of all units in all seasons. Suitable for wet brakes and shaft coupling (PTO clutches).
Application instructions
RAVENOL STOU SAE 10W-30 has a wide range of applications in engines, transmissions and hydraulic systems of modern tractors.
RAVENOL STOU SAE 10W-30 is suitable as an engine oil for gasoline engines and intake and turbo charged diesel engines, also as gear oil (including wet brakes) and as hydraulic oil.
Characteristics
- A powerful dispersion and detergency
- Protection against wear, corrosion and foam
- High resistance to oxidation
- Excellent extreme pressure properties
- A high and stable viscosity index
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-30 |
10W-30
|
||
| API | CG-4, GL-4, SF |
CG-4, GL-4, SF
|
||
| ACEA | E3 |
E3
|
||
| Recomendations | Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Suitable for | Atlas Copco Kompressor |
Atlas Copco Kompressor
|
||
| Density at 20 °C | g/cm³ | 867 | EN ISO 12185 |
867
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 11.7 | DIN 51562-1 |
11.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 74.7 | DIN 51562-1 |
74.7
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 151 | DIN ISO 2909 |
151
DIN ISO 2909
|
|
| tbn | mgKOH/g | 12.4 | ASTM D2896 |
12.4
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Recommendations | ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-30, New Holland / Ford ESN-M2C-15- 9B, Spezialtraktorenöl: John Deere J27, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B |
ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-30, New Holland / Ford ESN-M2C-15- 9B, Spezialtraktorenöl: John Deere J27, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
|
RAVENOL STOU SAE 10W-40
Tractor oil
RAVENOL STOU SAE 10W-40 is an up-to-date multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.
Compliance with the requirements:
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
- Available packaging
- Product parameters
Volume:
5 L
Vendor code:
1310111-005
Volume:
10 L
Vendor code:
1310111-010
Volume:
20 L
Vendor code:
1310111-020
1310111-020-01-999
Code:
4014835739826
Volume:
20 L, ecobox
Vendor code:
1310111-B20
Volume:
60 L
Vendor code:
1310111-060
Volume:
208 L
Vendor code:
1310111-208
Volume:
1000 L
Vendor code:
1310111-700
RAVENOL STOU SAE 10W-40 meets the recommendations of all well known tractor manufacturers and is equal to use in engines, transmissions and hydraulic systems of modern tractors. Ensures trouble-free operation of all units in all seasons.
Application instructions
RAVENOL STOU SAE 10W-40 has a wide range of applications in engines, transmissions and hydraulic systems of modern tractors.
RAVENOL STOU SAE 10W-40 is suitable as an engine oil for gasoline engines and intake and turbo charged diesel engines, also as gear oil (including wet brakes) and as hydraulic oil.
Characteristics
- A powerful dispersion and detergency
- A high activity against wear, corrosion and foam
- A very strong resistance to oxidation
- A high and stable viscosity index
- An excellent extreme pressure properties
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| SAE | 10W-40 |
10W-40
|
||
| API | CG-4, GL-4, SF |
CG-4, GL-4, SF
|
||
| ACEA | E3 |
E3
|
||
| Recomendations | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Suitable for | Atlas Copco Kompressor |
Atlas Copco Kompressor
|
||
| Density at 20 °C | g/cm³ | 864 | EN ISO 12185 |
864
g/cm³
EN ISO 12185
|
| Color | tan | visual |
tan
visual
|
|
| Viscosity at 100 °C | mm²/s | 14.7 | DIN 51562-1 |
14.7
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 101.1 | DIN 51562-1 |
101.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 151 | DIN ISO 2909 |
151
DIN ISO 2909
|
|
| tbn | mgKOH/g | 12.4 | ASTM D2896 |
12.4
mgKOH/g
ASTM D2896
|
| Approvals | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Recommendations | 80W-90, 85W, 85W-90, ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Case IH-MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C-134 B, Ford ESN-M2C-134 C, Ford ESN-M2C-134 D, Ford ESN-M2C-159 B, Ford ESN-M2C-159 C, Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68-100, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-40, New Holland NH 410B, Spezialtraktorenöl: John Deere J20C, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
80W-90, 85W, 85W-90, ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Case IH-MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C-134 B, Ford ESN-M2C-134 C, Ford ESN-M2C-134 D, Ford ESN-M2C-159 B, Ford ESN-M2C-159 C, Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68-100, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-40, New Holland NH 410B, Spezialtraktorenöl: John Deere J20C, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
Cooling system
RAVENOL HDT Heavy Duty Truck Cool. Concentrate
Coolant
RAVENOL Fließverbesserer
- Product parameters
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
RAVENOL HDT Heavy Duty Truck Cool. Premix -40C
Coolant
RAVENOL Fließverbesserer
- Product parameters
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
RAVENOL destilliertes Wasser
For batteries
RAVENOL destilliertes Wasser is deionised distilled water and is manufactured using the ion exchangerprocess.
Compliance with the requirements:
DIN 43530-4, DIN EN 50272
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1360010-001
1360010-001-01-000
Code:
4014835300453
Volume:
5 L
Vendor code:
1360010-005
1360010-005-01-000
Code:
4014835300507
Volume:
5 L, specialist. canister
Vendor code:
1360010-005
1360010-005-01-001
Code:
4014835300514
Volume:
208 L
Vendor code:
1360010-208
Volume:
1000 L
Vendor code:
1360010-700
Volume:
20 L
Vendor code:
1360010-020
1360010-020-01-001
Code:
4014835300422
In the course of this process, the water flows through a column filled with ion exchange resin. This has theability to exchange its accumulated ions for the ions present in the water.
As the ion exchange resin cannot accumulate an infinite number of ions, they have to be “revived”, i.e. theyhave to be regenerated. This takes place using the currently most commonly used regeneration agents: sodiumchloride (water softening), hydrochloric acid (cation exchange) and sodium hydroxide (anion exchange).The conductivity of the water flowing through is constantly checked in a fully automated process and the ionexchanger unit regulates itself automatically.
RAVENOL destilliertes Wasser deionised water is regularly checked by taking samples.
Application instructions
RAVENOL destilliertes Wasser is ideally suited to filling up vehicle batteries and for steam irons and aquariums (to reduce the hardness of the water).
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Recomendations | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Approvals | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Recommendations | DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser |
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
|
Cooling system
RAVENOL TTC Premix -40°C Protect C11
Coolant
RAVENOL TTC Trad. Techn. Coolant Premix -40°C is a ready to use, prediluted eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant for cooling circuits in combustion engines which provides maintenance-free corrosion and frost protection. The product is formulated as a long-term coolant based on a proven inhibitor development.
Compliance with the requirements:
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410105-150
1410105-150-01-999
Code:
4014835755314
Volume:
5 L
Vendor code:
1410105-005
1410105-005-01-999
Code:
4014835755352
Volume:
20 L
Vendor code:
1410105-020
1410105-020-01-999
Code:
4014835755321
Volume:
20 L, ecobox
Vendor code:
1410105-B20
1410105-B20-01-888
Code:
4014835855939
Volume:
60 L
Vendor code:
1410105-060
1410105-060-01-999
Code:
4014835755369
Volume:
208 L
Vendor code:
1410105-208
1410105-208-01-999
Code:
4014835755383
Volume:
1000 L
Vendor code:
1410105-700
The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.
That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.
RAVENOL TTC Trad. Techn. Coolant Premix -40°C protects the cooling system from rust, frost, and in summer, from overheating.
Application instructions
RAVENOL TTC Trad. Techn. Coolant Premix -40°C is a prediluted coolant with frost and rust protection for year-round use in automotive engines.
Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions: Add RAVENOL TTC Trad. Techn. Coolant Premix -40°C to radiator to fill line.
Characteristics
- Excellent for light metal engines
- Good reserve alkalinity
- High-quality corrosion additives for optimal corrosion protection
- Elastomer compatible with elastome
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF |
D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF
|
||
| Recomendations | AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Suitable for | Suzuki |
Suzuki
|
||
| Density at 20 °C | g/cm³ | 1080 | EN ISO 12185 |
1080
g/cm³
EN ISO 12185
|
| Color | yellow green | visual |
yellow green
visual
|
|
| pH - value at 20 °C | 7,8 | ASTM D1287 |
7,8
ASTM D1287
|
|
| Freezing point | °C | -40 | ASTM D1177 |
-40
°C
ASTM D1177
|
| Approvals | AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Recommendations | AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11) |
AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
|
RAVENOL HTC Premix -40°C Protect MB 325.0
Coolant
RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a ready-to-use, prediluted with water, eco-friendly, 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free, all-season coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.
Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410121-150
1410121-150-01-999
Code:
4014835755710
Volume:
5 L
Vendor code:
1410121-005
1410121-005-01-999
Code:
4014835755758
Volume:
10 L
Vendor code:
1410121-010
Volume:
20 L
Vendor code:
1410121-020
1410121-020-01-999
Code:
4014835755727
Volume:
20 L, ecobox
Vendor code:
1410121-B20
1410121-B20-01-888
Code:
4014835855403
Volume:
60 L
Vendor code:
1410121-060
1410121-060-01-999
Code:
4014835755765
Volume:
208 L
Vendor code:
1410121-208
1410121-208-01-999
Code:
4014835755789
The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.
That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.
RAVENOL HTC Hybrid Technology Coolant Premix -40°C protects the cooling system from rust, frost, and in summer, from overheating.
Application instructions
RAVENOL HTC Hybrid Technology Coolant Premix -40°C is a prediluted coolant with frost and rust protection for year-round use in automotive engines.
Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions: Add RAVENOL HTC Hybrid Technology Coolant Premix -40°C to radiator to fill line.
RAVENOL HTC Hybrid Technology Coolant Premix -40°C can also be used as a “ready for use” dilution in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).
RAVENOL HTC Hybrid Technology Coolant Concentrate is included in the list of recommendations of the LaWa for water management requirements for geothermal probes and geothermal collectors.
Characteristics
- Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium andcopper alloy radiators
- Good reserve alkalinity
- Protection from corrosion and cavitation
- Prevents sediments and foaming in the cooling system
- Compatible with elastomers used in automotive radiators
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D3306, D4340, D4985 |
D3306, D4340, D4985
|
||
| Recomendations | DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C |
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
|
||
| Suitable for | DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW |
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
|
||
| Density at 20 °C | g/cm³ | 1080 | EN ISO 12185 |
1080
g/cm³
EN ISO 12185
|
| Color | Blue | visual |
Blue
visual
|
|
| pH - value at 20 °C | 7,5 | ASTM D1287 |
7,5
ASTM D1287
|
|
| Freezing point | °C | -40 | ASTM D1177 |
-40
°C
ASTM D1177
|
| Approvals | DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C |
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
|
||
| Recommendations | ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11) |
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
|
RAVENOL TTC Concentrate Protect C11
Coolant
RAVENOL TTC Trad. Techn. Coolant Concentrate is an eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant for cooling circuits in combustion engines which provides maintenance-free corrosion and frost protection. The product is formulated as a long-term coolant based on a proven inhibitor development.
Compliance with the requirements:
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410100-150
1410100-150-01-999
Code:
4014835755215
Volume:
5 L
Vendor code:
1410100-005
1410100-005-01-999
Code:
4014835755253
Volume:
10 L
Vendor code:
1410100-010
Volume:
20 L
Vendor code:
1410100-020
1410100-020-01-999
Code:
4014835755222
Volume:
20 L, ecobox
Vendor code:
1410100-B20
Volume:
60 L
Vendor code:
1410100-060
1410100-060-01-999
Code:
4014835755260
Volume:
60 L, plastic
Vendor code:
1410100-060-01-995
Code:
4014835755239
Volume:
60 L, print
Vendor code:
1410100-D60
Volume:
208 L
Vendor code:
1410100-208
1410100-208-01-995
Code:
4014835755208
Volume:
1000 L
Vendor code:
1410100-700
It is no longer just the anti-freeze effect (which automatically exists in an ethylene-glycol based product) which is critical for the quality of a coolant, but also the rust protection.
Therefore manufacturers subject coolants to long corrosion and cavitation tests.
RAVENOL TTC Trad. Techn. Coolant Concentrate protects the cooling system from corrosion, frost, and in the summer from overheating.
Application instructions
RAVENOL TTC Trad. Techn. Coolant Concentrate with frost and rust protection. Use according to the mixing chart. Follow manufacturer’s recommendations.
Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions: Clean cooling system, check for leaks, flush.
Mix RAVENOL TTC Trad. Techn. Coolant Concentrate with distilled water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.
| Table of mixing ratios | ||
|---|---|---|
| Antifreeze protection until | Parts Antifreeze | Parts Water |
| -20°C | 35% | 65% |
| -37°C | 50% | 50% |
| -50°C | 60% | 40% |
Characteristics
- Excellent for light metal engines
- Good reserve alkalinity
- High-quality corrosion additives for optimal corrosion protection
- Elastomer compatible with elastomers used in automotive radiators
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF |
D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF
|
||
| Recomendations | AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Suitable for | Suzuki |
Suzuki
|
||
| Density at 20 °C | g/cm³ | 1130 | EN ISO 12185 |
1130
g/cm³
EN ISO 12185
|
| Color | yellow green | visual |
yellow green
visual
|
|
| Freezing point (50 % solution) | °C | -37 | ASTM D1177 |
-37
°C
ASTM D1177
|
| pH - value at 20 °C (50 Vol %) | 8,4 | ASTM D1287 |
8,4
ASTM D1287
|
|
| Approvals | AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Recommendations | AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11) |
AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), CUNA NC 956-16 (Italien), Chrysler MS-7170, Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
|
RAVENOL HDT Heavy Duty Truck Cool. Concentrate
Coolant
RAVENOL Fließverbesserer
- Product parameters
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
RAVENOL HTC Concentrate Protect MB 325.0
Coolant
RAVENOL HTC Hybrid Technology Coolant Concentrate is an all-season, eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant with frost and rust protection for Mercedes, BMW, Opel, Saab and General Motors engines. This product is formulated based on a proven inhibitor development by combining silicates with the organic additive technology OAT as an extended life coolant.
Compliance with the requirements:
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
- Available packaging
- Product parameters
Volume:
1.5 L
Vendor code:
1410120-150
1410120-150-01-999
Code:
4014835755611
Volume:
5 L
Vendor code:
1410120-005
1410120-005-01-999
Code:
4014835755659
Volume:
10 L
Vendor code:
1410120-010
Volume:
20 L
Vendor code:
1410120-020
1410120-020-01-999
Code:
4014835755628
Volume:
20 L, ecobox
Vendor code:
1410120-B20
1410120-B20-01-888
Code:
4014835852730
Volume:
60 L
Vendor code:
1410120-060
1410120-060-01-999
Code:
4014835755666
Volume:
208 L
Vendor code:
1410120-208
1410120-208-01-999
Code:
4014835755680
Volume:
1000 L
Vendor code:
1410120-700
The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection.
That is why manufacturers subject antifreeze to lengthy corrosion and cavitation tests.
RAVENOL HTC Hybrid Technology Coolant Concentrate protects the cooling system from rust, frost, and in summer, from overheating.
Application instructions
RAVENOL HTC Hybrid Technology Coolant Concentrate with frost and rust protection for year-round use in automotive engines. Mix according to chart. Follow manufacturer's recommendations.
Instructions: Clean cooling system, check for leaks, flush.
Mix RAVENOL HTC Hybrid Technology Coolant Concentrate with distilled water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.
RAVENOL HTC Hybrid Technology Coolant Concentrate can also be used in geothermal probes and geothermal collectors as recommended list of LaWa (Federal / State Working Group on Water in Germany).
| Table of mixing ratios | ||
|---|---|---|
| Antifreeze protection until | Parts Antifreeze | Parts Water |
| -20°C | 35% | 65% |
| -37°C | 50% | 50% |
| -50°C | 60% | 40% |
Characteristics
- Excellent for use in cast iron or aluminium engines, or alloys of the two metals, and aluminium and copper alloy radiators
- Excellent reserve alkalinity
- Protection from corrosion and cavitation
- Prevents sediments and foaming in the cooling system
- Compatible with elastomers used in automotive radiators
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| ASTM | D3306, D4340, D4985 |
D3306, D4340, D4985
|
||
| Recomendations | DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C |
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
|
||
| Suitable for | DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW |
DAF, GM SATURN, Jaguar, John Deere, Porsche, ROVER, SAAB, VW
|
||
| Density at 20 °C | g/cm³ | 1130 | EN ISO 12185 |
1130
g/cm³
EN ISO 12185
|
| Color | Blue | visual |
Blue
visual
|
|
| Freezing point (50 % solution) | °C | -37 | ASTM D1177 |
-37
°C
ASTM D1177
|
| pH - value at 20 °C (50 Vol %) | 7,0 - 8,0 | ASTM D1287 |
7,0 - 8,0
ASTM D1287
|
|
| Approvals | DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C |
DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford ESE-M978 B4H-A, GM 1825M, GM 1899M, GM QL130100, MAN 324 Type NF, MB 325.0, MB 326.0, NATO S-759, Renault Glaceol RX Type D, SAE J 1034, VW TL 774-C
|
||
| Recommendations | ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11) |
ASTM D3306, ASTM D4340, ASTM D4985, Audi, BMW 81229407454, BMW 83192211191, DAF, DTFR 29C100 (MB 325.0), DTFR 29D100 (MB 326.0), Ford AF Plus, Ford ESE-M978B4H-A, GM 1825M, GM 1899M, GM 93740140, GM 93740141, GM SATURN, Honda OL999-9011, Jaguar, John Deere, MAN 324 NF, MB (A 000 989 08 25 10), MB 325.0 (Konzentrat), MB 326.0 (Premix), NATO S-759, Opel/GM QL130100, Porsche, ROVER, Renault Glaceol RX Type D, SAAB, SAE J1034, VW TL 774-C (entspricht G11)
|
RAVENOL HDT Heavy Duty Truck Cool. Premix -40C
Coolant
RAVENOL Fließverbesserer
- Product parameters
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
RAVENOL destilliertes Wasser
For batteries
RAVENOL destilliertes Wasser is deionised distilled water and is manufactured using the ion exchangerprocess.
Compliance with the requirements:
DIN 43530-4, DIN EN 50272
- Available packaging
- Product parameters
Volume:
1 L
Vendor code:
1360010-001
1360010-001-01-000
Code:
4014835300453
Volume:
5 L
Vendor code:
1360010-005
1360010-005-01-000
Code:
4014835300507
Volume:
5 L, specialist. canister
Vendor code:
1360010-005
1360010-005-01-001
Code:
4014835300514
Volume:
208 L
Vendor code:
1360010-208
Volume:
1000 L
Vendor code:
1360010-700
Volume:
20 L
Vendor code:
1360010-020
1360010-020-01-001
Code:
4014835300422
In the course of this process, the water flows through a column filled with ion exchange resin. This has theability to exchange its accumulated ions for the ions present in the water.
As the ion exchange resin cannot accumulate an infinite number of ions, they have to be “revived”, i.e. theyhave to be regenerated. This takes place using the currently most commonly used regeneration agents: sodiumchloride (water softening), hydrochloric acid (cation exchange) and sodium hydroxide (anion exchange).The conductivity of the water flowing through is constantly checked in a fully automated process and the ionexchanger unit regulates itself automatically.
RAVENOL destilliertes Wasser deionised water is regularly checked by taking samples.
Application instructions
RAVENOL destilliertes Wasser is ideally suited to filling up vehicle batteries and for steam irons and aquariums (to reduce the hardness of the water).
| Parameter | Unit | Value | Tests | |
|---|---|---|---|---|
| Recomendations | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Approvals | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Recommendations | DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser |
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
|