Search by VIN, equipment make, model, type or unit name, or by the part number of any oil:

Search
Mercury Marine Stationary engines MerCruiser 6.2L

Oil for Mercury Marine, Stationary engines MerCruiser 6.2L, MX 6.2 MPI

Mercury Marine Model (Stationary engines MerCruiser 6.2L) to find out what kind of oil is used for it

Mercury Marine Stationary engines MerCruiser 6.2L MX 6.2 MPIfrom 2006 to 2012 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Power:

Nodes and assemblies

Engine

Liquid volume (basic): 4.25 L
RAVENOL MARINEOIL PETROL SAE 25W-40

RAVENOL MARINEOIL PETROL SAE 25W-40

For boats

RAVENOL MARINEOIL PETROL SAE 25W-40 is a modern high additive treated marine engine oil with synthetic additives. It is suitable for inboard and outboard marine gasoline engines. The high additive content guarantees an excellent effect on the detergent, dispersant and anti corrosion characteristics.

Manufacturer Approved:
NMMA FC-W, NMMA FC-43514X

Compliance with the requirements:
Volvo Penta AB

Buy Online
Show more Hide details

SAE:  25W-40

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1163220-001
1163220-001-01-999

Code:
4014835730519

Volume:
4 L

Vendor code:
1163220-004
1163220-004-01-999

Code:
4014835730595

Volume:
10 L

Vendor code:
1163220-010
1163220-010-01-999

Code:
4014835730540

Volume:
20 L

Vendor code:
1163220-020
 

Volume:
20 L, ecobox

Vendor code:
1163220-B20
 

Volume:
60 L

Vendor code:
1163220-060
 

Volume:
208 L

Vendor code:
1163220-208
 

Volume:
1000 L

Vendor code:
1163220-700
 

RAVENOL MARINEOIL PETROL SAE 25W-40 is a top quality product with high safety reserves.

RAVENOL MARINEOIL PETROL SAE 25W-40 is also suitable in engines with catalysts.

Application instructions

RAVENOL MARINEOIL PETROL SAE 25W-40 is used in boat engines in case the specification SAE 25W-40 is requested.

Characteristics

  • Suitability for catalysts
  • Excellent detergent and dispersant characteristics
  • Very good cold start characteristics
  • A high oxidation stability
  • An excellent viscosity temperature behaviour
  • An excellent corrosion protection
  • High safety reserves
  • Reduction of emissions
Parameter Unit Value Tests
SAE 25W-40
25W-40
Type Mineral
Mineral
Manufacturer Approved NMMA FC-W, NMMA FC-43514X
NMMA FC-W, NMMA FC-43514X
Recomendations Volvo Penta AB
Volvo Penta AB
specification NMMA FC-W, NMMA FC-W (CAT)
NMMA FC-W, NMMA FC-W (CAT)
Suitable for Evinrude, Honda, Johnson, Kohler, Mercruiser, Mercury, Suzuki, Yamaha, Yanmar
Evinrude, Honda, Johnson, Kohler, Mercruiser, Mercury, Suzuki, Yamaha, Yanmar
Density at 20 °C g/cm³ 876 EN ISO 12185
876 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Viscosity at 100 °C mm²/s 18.9 DIN 51562-1
18.9 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 161.2 DIN 51562-1
161.2 mm²/s DIN 51562-1
Viscosity Index VI 133 DIN ISO 2909
133 DIN ISO 2909
CCS Viscosity at -15 °C mPa*s 6500 ASTM D5293
6500 mPa*s ASTM D5293
tbn mgKOH/g 11.3 ASTM D2896
11.3 mgKOH/g ASTM D2896
Approvals NMMA FC-W, NMMA FC-W (CAT), NMMA FC-43514X, Volvo Penta AB
NMMA FC-W, NMMA FC-W (CAT), NMMA FC-43514X, Volvo Penta AB
Recommendations Evinrude, Honda, Johnson, Kohler, Mercruiser, Mercury, Suzuki, VOLVO PENTA AB, Yamaha, Yanmar
Evinrude, Honda, Johnson, Kohler, Mercruiser, Mercury, Suzuki, VOLVO PENTA AB, Yamaha, Yanmar
Engine cycle 4T
4T
RAVENOL Outboardoel 4T SAE 15W-40

RAVENOL Outboardoel 4T SAE 15W-40

For boats

RAVENOL Outboardoel 4T SAE 25W-40 is a mineral engine oil with a special formulation for 4-stroke outboard engines with injection according to NMMA FC-W.

Manufacturer Approved:
NMMA FC-W, NMMA FB-83138K

Show more Hide details

SAE:  15W-40

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1153205-001
1153205-001-01-999

Code:
4014835729216

Volume:
4 L

Vendor code:
1153205-004
1153205-004-01-999

Code:
4014835729292

Volume:
5 L

Vendor code:
1153205-005
1153205-005-01-999

Code:
4014835729254

Volume:
10 L

Vendor code:
1153205-010
1153205-010-01-999

Code:
4014835729247

Volume:
20 L

Vendor code:
1153205-020
 

Volume:
20 L, ecobox

Vendor code:
1153205-B20
1153205-B20-01-888

Code:
4014835780729

Volume:
60 L

Vendor code:
1153205-060
 

Volume:
208 L

Vendor code:
1153205-208
 

RAVENOL Outboardoel 4T SAE 25W-40 offers perfect lubrication and wear protection through special low-ash additives and excellent corrosion protection.

RAVENOL Outboardoel 4T SAE 25W-40 is blue colored high performance 4-stroke motor oil.

RAVENOL Outboardoel 4T SAE 25W-40 is released and thus meets the requirements of the National Marine Manufacturers Association NMMA FC-W.

Application instructions

RAVENOL Outboardoel 4T SAE 25W-40 can be used in all outboard motors according to the engine manufacturer's specifications, for which oil is recommended according to "FC-W".

RAVENOL Outboardoel 4T SAE 25W-40 can also be used for engines operating in seawater.

RAVENOL Outboardoel 4T SAE 25W-40 meets the requirements from Yamaha 115 General Performance Engine Test for 4-stroke outboard motors.

Follow the manufacturer’s recommendations.

Characteristics

  • Perfect lubrication of all engine parts
  • A strong cleaning effect and a residue-free combustion without deposits
  • Good cold start properties
  • A very high-wear, oxidation and corrosion protection
  • Excellent shear stability
  • Corrosion protection in all oil-wetted engine parts
  • An adhesive, pressure-and temperature-resistant oil film
Parameter Unit Value Tests
SAE 15W-40
15W-40
Type Mineral
Mineral
Manufacturer Approved NMMA FC-W, NMMA FB-83138K
NMMA FC-W, NMMA FB-83138K
Suitable for Evinrude, Honda, Johnson, Mercury Verado, Nissan, Suzuki, Tohatsu, Yamaha
Evinrude, Honda, Johnson, Mercury Verado, Nissan, Suzuki, Tohatsu, Yamaha
Density at 20 °C g/cm³ 864 EN ISO 12185
864 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Viscosity at 100 °C mm²/s 14.4 DIN 51562-1
14.4 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 98.6 DIN 51562-1
98.6 mm²/s DIN 51562-1
Viscosity Index VI 150 DIN ISO 2909
150 DIN ISO 2909
tbn mgKOH/g 7.5 ASTM D2896
7.5 mgKOH/g ASTM D2896
Approvals NMMA FC-W, NMMA FB-83138K
NMMA FC-W, NMMA FB-83138K
Recommendations Evinrude, Honda, Johnson, Mercury Verado, Nissan, Suzuki, Tohatsu, Yamaha
Evinrude, Honda, Johnson, Mercury Verado, Nissan, Suzuki, Tohatsu, Yamaha
Engine cycle 4T
4T

Transmission

RAVENOL ATF DEXRON III H

RAVENOL ATF DEXRON III H

For automatic transmission

RAVENOL ATF DEXRON III H is a synthetic ATF (Automatic Transmission Fluid), designed on the basis of high quality hydrocrack oils with a special additive and inhibition, which ensure a perfect function of theautomatic transmission.

Manufacturer Approved:
Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B

Compliance with the requirements:
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1212100-001
1212100-001-01-999

Code:
4014835732810

Volume:
4 L

Vendor code:
1212100-004
1212100-004-01-999

Code:
4014835732896

Volume:
10 L

Vendor code:
1212100-010
1212100-010-01-999

Code:
4014835732841

Volume:
20 L

Vendor code:
1212100-020
1212100-020-01-999

Code:
4014835732827

Volume:
20 L, ecobox

Vendor code:
1212100-B20
1212100-B20-01-888

Code:
4014835787025

Volume:
60 L

Vendor code:
1212100-060
1212100-060-01-999

Code:
4014835732865

Volume:
60 L, print

Vendor code:
1212100-D60
1212100-D60-01-888

Code:
4014835732834

Volume:
208 L

Vendor code:
1212100-208
1212100-208-01-999

Code:
4014835732889

Volume:
208 L, print

Vendor code:
1212100-D28
1212100-D28-01-888

Code:
4014835732803

Volume:
1000 L

Vendor code:
1212100-700
1212100-700-01-999

RAVENOL ATF DEXRON III H is universal ATF (Automatic Transmission Fluid) for all automatic transmission with and without controlled torque converter lockup clutch (so-called GKÜB = gear-clutch-lock) which are required for the transmission fluid type Dexron III H.

Application instructions

RAVENOL ATF DEXRON III H was developed for use in automatic transmissions with electronically controlled converter lockup clutch.

RAVENOL ATF DEXRON III H is especially suitable for use in transmissions with ATF Dexron III H specification.

RAVENOL ATF DEXRON III H is backwards compatible and can be used in transmissions with specification ATF Dexron F III.

RAVENOL ATF DEXRON III H is mixable with all ATF brands. It is advised to rinse with RAVENOL ATF DEXRON III H before, beforehand the final filling with RAVENOL ATF DEXRON III H is made.

Characteristics

  • Very good lubricating properties even at low temperatures in winter
  • High and stable viscosity index
  • Very low flow point
  • Excellent oxidation stability
  • Extensive protection against wear, corrosion and foaming
  • Well-tuned friction properties
  • Neutral behaviour towards sealing materials
  • Neutral behaviour by inhibition towards non-ferrous metals
Parameter Unit Value Tests
Type Synthetic
Synthetic
Manufacturer Approved Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B
Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B
Recomendations Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
specification Allison C-4, Allison TES-389, GM DEXRON® III F, GM Dexron® II E, GM Dexron® III H
Allison C-4, Allison TES-389, GM DEXRON® III F, GM Dexron® II E, GM Dexron® III H
Suitable for Nissan
Nissan
Density at 20 °C g/cm³ 847 EN ISO 12185
847 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 7.2 DIN 51562-1
7.2 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 33.9 DIN 51562-1
33.9 mm²/s DIN 51562-1
Viscosity Index VI 185 DIN ISO 2909
185 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 14.200 ASTM D2983
14.200 mPa*s ASTM D2983
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Strip Test at 121 °C 1b ASTM D130
1b ASTM D130
tbn mgKOH/g 1.8 ASTM D2896
1.8 mgKOH/g ASTM D2896
Approvals Allison C-4, Allison TES-389, Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, GM Dexron® II E, GM Dexron® III F, GM Dexron® III H, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Voith H55.6336.3x Extended Drain (G1363), Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 04D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 14B, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C, ZF TE-ML 20B, ZF TE-ML 25B
Allison C-4, Allison TES-389, Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, GM Dexron® II E, GM Dexron® III F, GM Dexron® III H, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Voith H55.6336.3x Extended Drain (G1363), Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 04D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 14B, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C, ZF TE-ML 20B, ZF TE-ML 25B
Recommendations Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON® M-940717, MAN 339 L1, MAN 339 V1, MAN 339 Z1, MAN 339 Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Nissan, VOLVO Transmission Oil 97341, Volvo 1161521, Volvo 1161621, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON® M-940717, MAN 339 L1, MAN 339 V1, MAN 339 Z1, MAN 339 Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Nissan, VOLVO Transmission Oil 97341, Volvo 1161521, Volvo 1161621, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
ATF Dexron III H
Dexron III H

Power steering

RAVENOL MARINE PowerTrim & Steering Fluid

RAVENOL MARINE PowerTrim & Steering Fluid

For hydraulic boosters

RAVENOL MARINE Power Trim & Steering Fluid is a high quality hydraulic oil based on specially selected solvent refined base oils.

Compliance with the requirements:
Volvo PENTA

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1234100-001
1234100-001-01-999

Code:
4014835735019

Volume:
4 L

Vendor code:
1234100-004
 

Volume:
10 L

Vendor code:
1234100-010
 

Volume:
20 L

Vendor code:
1234100-020
 

Volume:
20 L, ecobox

Vendor code:
1234100-B20
 

Volume:
60 L

Vendor code:
1234100-060
 

Volume:
208 L

Vendor code:
1234100-208
 

Volume:
1000 L

Vendor code:
1234100-700
 

It is particularly characterized by a high and stable viscosity index and reliable corrosion protection. Effective additives provide an excellent wear protection even under extreme loads. The behaviour towards sealing materials is neutral.

Application instructions

RAVENOL MARINE Power Trim & Steering Fluid is an excellent product for lubrication of hydraulics in the marine area.

May not be used if in the hydraulic systems are silver and / or silver-plated construction and operating elements present.

Characteristics

  • A high and stable viscosity index
  • Excellent protection against wear
  • Widest possible protection against corrosion
  • A very good air and water separation to prevent foaming
  • A neutral attitude towards plastic and seals
  • A very low pour point
Parameter Unit Value Tests
Type Mineral
Mineral
Recomendations Volvo PENTA
Volvo PENTA
Suitable for Mercruiser, Yanmar
Mercruiser, Yanmar
Density at 20 °C g/cm³ 845 EN ISO 12185
845 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Viscosity at 100 °C mm²/s 6.3 DIN 51562-1
6.3 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 32 DIN 51562-1
32 mm²/s DIN 51562-1
Viscosity Index VI 152 DIN ISO 2909
152 DIN ISO 2909
Approvals Volvo PENTA
Volvo PENTA
Recommendations Mercruiser, OMC, VOLVO PENTA, Yanmar
Mercruiser, OMC, VOLVO PENTA, Yanmar

Hydraulic system

RAVENOL MARINE PowerTrim & Steering Fluid

RAVENOL MARINE PowerTrim & Steering Fluid

For hydraulic boosters

RAVENOL MARINE Power Trim & Steering Fluid is a high quality hydraulic oil based on specially selected solvent refined base oils.

Compliance with the requirements:
Volvo PENTA

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1234100-001
1234100-001-01-999

Code:
4014835735019

Volume:
4 L

Vendor code:
1234100-004
 

Volume:
10 L

Vendor code:
1234100-010
 

Volume:
20 L

Vendor code:
1234100-020
 

Volume:
20 L, ecobox

Vendor code:
1234100-B20
 

Volume:
60 L

Vendor code:
1234100-060
 

Volume:
208 L

Vendor code:
1234100-208
 

Volume:
1000 L

Vendor code:
1234100-700
 

It is particularly characterized by a high and stable viscosity index and reliable corrosion protection. Effective additives provide an excellent wear protection even under extreme loads. The behaviour towards sealing materials is neutral.

Application instructions

RAVENOL MARINE Power Trim & Steering Fluid is an excellent product for lubrication of hydraulics in the marine area.

May not be used if in the hydraulic systems are silver and / or silver-plated construction and operating elements present.

Characteristics

  • A high and stable viscosity index
  • Excellent protection against wear
  • Widest possible protection against corrosion
  • A very good air and water separation to prevent foaming
  • A neutral attitude towards plastic and seals
  • A very low pour point
Parameter Unit Value Tests
Type Mineral
Mineral
Recomendations Volvo PENTA
Volvo PENTA
Suitable for Mercruiser, Yanmar
Mercruiser, Yanmar
Density at 20 °C g/cm³ 845 EN ISO 12185
845 g/cm³ EN ISO 12185
Color Blue visual
Blue visual
Viscosity at 100 °C mm²/s 6.3 DIN 51562-1
6.3 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 32 DIN 51562-1
32 mm²/s DIN 51562-1
Viscosity Index VI 152 DIN ISO 2909
152 DIN ISO 2909
Approvals Volvo PENTA
Volvo PENTA
Recommendations Mercruiser, OMC, VOLVO PENTA, Yanmar
Mercruiser, OMC, VOLVO PENTA, Yanmar

Recognizing the number...