Search by VIN, equipment make, model, type or unit name, or by the part number of any oil:

Search
Citroen 2CV / Dyane / Méhari

Oil for Citroen, 2CV / Dyane / Méhari, Dyane 6

Citroen Model (2CV / Dyane / Méhari) to find out what kind of oil is used for it

Citroen 2CV / Dyane / Méhari Dyane 6from 1967 to 1983 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Power:

Nodes and assemblies

Mechanical gearbox in a unit with final drive

Liquid volume (basic): 0.9 L
RAVENOL Getriebeoel MZG SAE 80W-90 GL-4

RAVENOL Getriebeoel MZG SAE 80W-90 GL-4

For transmission

RAVENOL Getriebeoel MZG SAE 80W-90 GL contains high-quality base oils with a balanced active agent component additive. This ensures a high load carrying capacity, wear protection and oxidation stability.Above-average viscosity-temperature properties, low solidification points and last but not least the prevention of foaming allows for use at various operating conditions.

Manufacturer Approved:
ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A

Compliance with the requirements:
DTFR 13B100 (MB 235.1), Ford SQM-2C 9008-A, MAN 341 Type E1, MAN 341 Type Z1, MB 235.1, MB 235.14, ZF TE-ML 02B

Show more Hide details

SAE:  80W-90

API:  GL-4

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1223105-001
1223105-001-01-999

Code:
4014835734616

Volume:
4 L

Vendor code:
1223105-004
1223105-004-01-999

Code:
4014835734692

Volume:
10 L

Vendor code:
1223105-010
1223105-010-01-999

Code:
4014835734647

Volume:
20 L

Vendor code:
1223105-020
1223105-020-01-999

Code:
4014835734623

Volume:
20 L, ecobox

Vendor code:
1223105-B20
1223105-B20-01-888

Code:
4014835789425

Volume:
60 L

Vendor code:
1223105-060
1223105-060-01-999

Code:
4014835734661

Volume:
208 L

Vendor code:
1223105-208
1223105-208-01-999

Code:
4014835734685

Volume:
1000 L

Vendor code:
1223105-700
1223105-700-01-999

Code:
4014835734678

Application instructions

RAVENOL Getriebeoel MZG SAE 80W-90 GL is suitable for lubricating manual transmissions, differential- and steering gears in vehicles requiring EP transmission oil according to manufacturer specifications.

Characteristics

  • well adhering, pressure resistant lubricating films
  • excellent oxidation stability
  • above-average viscosity-temperature properties
  • anti-wear effect
  • good air release characteristics, no foaming
  • neutral to metal and sealants
Parameter Unit Value Tests
SAE 80W-90
80W-90
Type Mineral
Mineral
API GL-4
GL-4
Manufacturer Approved ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A
ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A
Recomendations DTFR 13B100 (MB 235.1), Ford SQM-2C 9008-A, MAN 341 Type E1, MAN 341 Type Z1, MB 235.1, MB 235.14, ZF TE-ML 02B
DTFR 13B100 (MB 235.1), Ford SQM-2C 9008-A, MAN 341 Type E1, MAN 341 Type Z1, MB 235.1, MB 235.14, ZF TE-ML 02B
specification MIL-L-2105 D
MIL-L-2105 D
Density at 20 °C g/cm³ 879 EN ISO 12185
879 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 14 DIN 51562-1
14 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 126.9 DIN 51562-1
126.9 mm²/s DIN 51562-1
Viscosity Index VI 108 DIN ISO 2909
108 DIN ISO 2909
Brookfield Viscosity at -26 °C mPa*s 45.600 ASTM D2983
45.600 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1b ASTM D130
1b ASTM D130
Approvals DTFR 13B100 (MB 235.1), Ford SQM-2C 9008-A, MAN 341 Type E1, MAN 341 Type Z1, MB 235.1, MB 235.14, MIL-L-2105 D, ZF TE-ML 02B, ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A
DTFR 13B100 (MB 235.1), Ford SQM-2C 9008-A, MAN 341 Type E1, MAN 341 Type Z1, MB 235.1, MB 235.14, MIL-L-2105 D, ZF TE-ML 02B, ZF TE-ML 16A, ZF TE-ML 17A, ZF TE-ML 19A
Recommendations DTFR 13B100 (MB 235.1), Ford SQM-2C-9008 A, MAN 341 E1, MAN 341 Z1, MB 235.1, MB 235.14, ZF TE-ML 02B
DTFR 13B100 (MB 235.1), Ford SQM-2C-9008 A, MAN 341 E1, MAN 341 Z1, MB 235.1, MB 235.14, ZF TE-ML 02B
RAVENOL VSG SAE 75W-90

RAVENOL VSG SAE 75W-90

For transmission

RAVENOL VSG SAE 75W-90 is a high performance universal transmission oil based on full synthetic components.

Compliance with the requirements:
BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 580, VW G 052 911, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B

Buy Online
Show more Hide details

SAE:  75W-90

API:  GL-4 GL-5

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221101-001
1221101-001-01-999

Code:
4014835733916

Volume:
4 L

Vendor code:
1221101-004
1221101-004-01-999

Code:
4014835733992

Volume:
10 L

Vendor code:
1221101-010
1221101-010-01-999

Code:
4014835733947

Volume:
20 L

Vendor code:
1221101-020
1221101-020-01-999

Code:
4014835733923

Volume:
20 L, ecobox

Vendor code:
1221101-B20
1221101-B20-01-888

Code:
4014835846654

Volume:
60 L

Vendor code:
1221101-060
1221101-060-01-999

Code:
2200000083081

Volume:
60 L, print

Vendor code:
1221101-D60
1221101-D60-01-888

Code:
4014835733930

Volume:
208 L

Vendor code:
1221101-208
1221101-208-01-999

Code:
4014835733985

Volume:
208 L, print

Vendor code:
1221101-D28
1221101-D28-01-888

Code:
4014835733909

Volume:
1000 L

Vendor code:
1221101-700
 

RAVENOL VSG SAE 75W-90 is designed based on high-quality synthetic base oils with a special additive treatment and inhibition ensuring trouble-free transmission function.

Application instructions

RAVENOL VSG SAE 75W-90 is excellent for use of highly stressed axle drives.

RAVENOL VSG SAE 75W-90 is suitable for synchronised and non-synchronised manual transmissions, transfer cases and ancillary transmission requiring API GL-5 or GL-4 oil.

RAVENOL VSG SAE 75W-90 is suitable for Ford-transmission IB5, B5, MTX75, GM5, MT285/6, MMT6/6, MT75, R15M-D, R15MX-D, MT82 and Porsche Full-Time Transfer Case with Torsen (PL72T) for Cayenne 92A / 958 Diesel and S Hybrid from 2010 to 2018.

Characteristics

  • high additive reserves for prolonged oil change intervals according to the manufacturer specifications
  • excellent cold flow properties
  • best wear protection and best transmission efficiency
  • Fuel savings even with short distances in low outdoor temperatures
  • stable lubricating film even under high stress
  • extraordinary corrosion protection and good compatibility with non-ferrous metal
  • high oxidation resistance prevents oil thickening and deposits
  • outstanding dirt-carrying capacity, i.e. aggregates are clean even after very long oil change intervals
  • excellent elastomer compatibility to prevent leaks
  • extreme shearing stability, remains within the clean oil viscosity per SAE class 75W-90 even after very long periods of use
  • very high protection from rust, corrosion and foaming
  • extreme low pour point
  • excellent EP properties
  • fuel savings
Parameter Unit Value Tests
SAE 75W-90
75W-90
Type Full synthetic
Full synthetic
API GL-4, GL-5
GL-4, GL-5
Recomendations BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 580, VW G 052 911, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 580, VW G 052 911, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
Suitable for IVECO
IVECO
Density at 20 °C g/cm³ 839.8 EN ISO 12185
839.8 g/cm³ EN ISO 12185
Color Yellow visual
Yellow visual
Viscosity at 100 °C mm²/s 16.8 DIN 51562-1
16.8 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 108.8 DIN 51562-1
108.8 mm²/s DIN 51562-1
Viscosity Index VI 168 DIN ISO 2909
168 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 47.000 ASTM D2983
47.000 mPa*s ASTM D2983
Seq. I at 24 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. II at 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Seq. III at 24 °C after 93,5 °C ml/ml 0/0 ASTM D892
0/0 ml/ml ASTM D892
Copper Strip Test at 121 °C 1a ASTM D130
1a ASTM D130
Approvals BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 580, VW G 052 911, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
BMW MTF-LT-4, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW, DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford WSD-M2C 200-C, MAN 342 Type S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Renault LKW, Scania STO 1:0, VW G 052 145, VW G 052 539, VW G 052 580, VW G 052 911, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
Recommendations BMW 83222339223 MTF-LT-4, BMW 83222365987, BMW 83229407768, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW (für verlängerte Intervalle), DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford 1045737, Ford 5021033, Ford MU7J 19G518 AA, Ford WSD-M2C200-C, IVECO, Land Rover TYK500010, MAN 342 S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Porsche 000.043.305.04, Porsche 958.341.536.00 (Torsen 2010-2018), Renault LKW, Scania STO 1:0, VOLVO 97312, VOLVO 97315, VOLVO 97319, VW G 052 145 A2, VW G 052 539 A2, VW G 052 580, VW G 052 911 A2, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B
BMW 83222339223 MTF-LT-4, BMW 83222365987, BMW 83229407768, BMW OSP, BMW SAF-XO, BOT 130 M, BOT 328, BOT 720, DAF LKW (für verlängerte Intervalle), DTFR 12B140 (MB 235.8), DTFR 13B110 (MB 235.11), Ford 1045737, Ford 5021033, Ford MU7J 19G518 AA, Ford WSD-M2C200-C, IVECO, Land Rover TYK500010, MAN 342 S1, MB 235.11, MB 235.21, MB 235.72, MB 235.8, MB 235.9, MIL-L-2105 D, Porsche 000.043.305.04, Porsche 958.341.536.00 (Torsen 2010-2018), Renault LKW, Scania STO 1:0, VOLVO 97312, VOLVO 97315, VOLVO 97319, VW G 052 145 A2, VW G 052 539 A2, VW G 052 580, VW G 052 911 A2, VW G 060 517 A2, ZF TE-ML 12B, ZF TE-ML 16F, ZF TE-ML 17B

Hydraulic brake system drum brakes

Liquid volume (basic): 0.5 L
RAVENOL DOT 5.1

RAVENOL DOT 5.1

For brake system

RAVENOL DOT 5.1 brake fluid is suitable for use in all vehicles with ABS properties. The fluid is chemically stable and contains additives that provide the highest lubricating power.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1350602-001
1350602-001-01-000

Code:
4014835692213

Volume:
20 L

Vendor code:
1350602-020
 

Volume:
200 L

Vendor code:
1350602-200
 

The specific formulation of RAVENOL DOT 5.1 offers international DOT 5.1 specifications SAE J 1704, ISO 4925 and fulfills FMVSS 116 DOT 5.1.

RAVENOL DOT 5.1 fluid is an ideal brake fluid for modern vehicles with the brake circuit accompanying systems such as ESP and ABS due to its low viscosity. The safety potential of the aggregates is enhanced by the excellent properties of RAVENOL DOT 5.1 even at low temperatures.

Application Note

RAVENOL DOT 5.1 brake fluid can be used in all vehicles where DOT 5.1 specification is required. It is suitable for all hydraulic brake systems with synthetic fluid.

RAVENOL DOT 5.1 brake fluid is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT 5.1, a complete change of the brake fluid is recommended.

RAVENOL DOT 5.1 is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • Optimal ABS properties
  • Chemical stability
  • High lubricating power
  • Neutral behavior towards brake parts
  • Low viscosity at low temperatures
  • Miscibility with all brake fluids of the same specification.
Parameter Unit Value Tests
Type Synthetic
Synthetic
specification DOT 5.1, ISO 4925 Class 5.1, SAE J 1704
DOT 5.1, ISO 4925 Class 5.1, SAE J 1704
Density at 20 °C g/cm³ 1069 EN ISO 12185
1069 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mPa*s 2.16 ASTM D445
2.16 mPa*s ASTM D445
Viscosity at -40 °C cSt 810 ASTM D445
810 cSt ASTM D445
Wet Equilibrium Reflux Boiling Point °C 187 FMVSS 116
187 °C FMVSS 116
Chemical Stability °C 1.5 FMVSS 116
1.5 °C FMVSS 116
Evaporation %w/w 68 FMVSS 116
68 %w/w FMVSS 116
Fluidity & Appearance at -40 °C i.O., 2s FMVSS 116
i.O., 2s FMVSS 116
Fluidity & Appearance at -50 °C i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
Water Tolerance at -40 °C transparent, 2s FMVSS 116
transparent, 2s FMVSS 116
Water Tolerance at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at -40 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Tinned Iron Δ mg/cm² -0.01 FMVSS 116
-0.01 Δ mg/cm² FMVSS 116
Steel mg/cm² -0.004 FMVSS 116
-0.004 mg/cm² FMVSS 116
Aluminium mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Cast Iron Δ mg/cm² -0,01 FMVSS 116
-0,01 Δ mg/cm² FMVSS 116
Brass mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Copper mg/cm² -0.03 FMVSS 116
-0.03 mg/cm² FMVSS 116
Zinc mg/cm² 0.03 FMVSS 116
0.03 mg/cm² FMVSS 116
Rubber Diameter Change 0.03 FMVSS 116
0.03 FMVSS 116
Hardness Change °IRHD -6 FMVSS 116
-6 °IRHD FMVSS 116
Appearance i.O. FMVSS 116
i.O. FMVSS 116
SBR at 70 °C mm 0.44 FMVSS 116
0.44 mm FMVSS 116
SBR at 120 °C mm 0.72 FMVSS 116
0.72 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703) IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
EPDM at 120 °C IRHD -3 FMVSS 116
-3 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925) mm 0.42 FMVSS 116
0.42 mm FMVSS 116
Approvals DOT 5.1, ISO 4925 Class 5.1, SAE J 1704
DOT 5.1, ISO 4925 Class 5.1, SAE J 1704

Hydraulic brake system disc brakes

Liquid volume (basic): 0.5 L
RAVENOL LHM PLUS Fluid

RAVENOL LHM PLUS Fluid

For brake system

RAVENOL LHM PLUS Fluid is special semisynthetic hydraulic fluid especially designed for use in vehicles of the PSA group (Citroen, Peugeot).

Buy Online
Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1181110-001
1181110-001-01-999

Code:
4014835736511

Volume:
4 L

Vendor code:
1181110-004
 

Volume:
10 L

Vendor code:
1181110-010
1181110-010-01-999

Code:
4014835736542

Volume:
20 L

Vendor code:
1181110-020
 

Volume:
20 L, ecobox

Vendor code:
1181110-B20
 

Volume:
60 L

Vendor code:
1181110-060
1181110-060-01-999

Code:
4014835736566

Volume:
208 L

Vendor code:
1181110-208
1181110-208-01-999

Code:
4014835736580

Volume:
1000 L

Vendor code:
1181110-700
 

Due to its special formulation RAVENOL LHM PLUS Fluid has significantly improved low temperature viscosity and fulfils the PSA approval specification.

Application instructions

RAVENOL LHM PLUS Fluid is used in vehicles with appropriately marked fluid reservoir for the hydraulic operation or support of braking, steering and suspension functions.

RAVENOL LHM PLUS Fuid is miscible with earlier LHM fluids.

Characteristics

  • A low pour point.
  • Excellent viscosity behavior at low temperatures.
  • An extremely high viscosity index.
  • Low viscosity at low temperatures.
  • Neutral behavior towards sealing materials.
Parameter Unit Value Tests
Type Semi-synthetic
Semi-synthetic
specification ISO 7308, PSA B71 2710
ISO 7308, PSA B71 2710
Density at 20 °C g/cm³ 831 EN ISO 12185
831 g/cm³ EN ISO 12185
Color Green visual
Green visual
Viscosity at 100 °C mm²/s 7.2 DIN 51562-1
7.2 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 25.3 DIN 51562-1
25.3 mm²/s DIN 51562-1
Viscosity at -40 °C 2600 ASTM D445
2600 ASTM D445
Viscosity Index VI 273 DIN ISO 2909
273 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 3460 ASTM D2983
3460 mPa*s ASTM D2983
Approvals ISO 7308, PSA B71 2710
ISO 7308, PSA B71 2710

Lubrication points oilers

RAVENOL Mehrzweckfett OML

RAVENOL Mehrzweckfett OML

For lubrication

RAVENOL Mehrzweckfett OML is lithium saponified multipurpose grease with oxidation and corrosion protective additives.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
100 g

Vendor code:
1340101-100
1340101-100-04-999

Code:
4014835844339

Volume:
200 g

Vendor code:
1340101-200
 

Volume:
400 g

Vendor code:
1340101-400
1340101-400-04-999

Code:
4014835768048

Volume:
5 kg

Vendor code:
1340101-005
1340101-005-03-000

Code:
4014835200159

Volume:
10 kg

Vendor code:
1340101-010
1340101-010-03-000

Code:
4014835200111

Volume:
15 kg

Vendor code:
1340101-015
 

Volume:
25 kg

Vendor code:
1340101-025
1340101-025-03-000

Code:
4014835200128

Volume:
180 kg

Vendor code:
1340101-180
1340101-180-03-000

Code:
4014835200142

RAVENOL Mehrzweckfett OML has an extreme mechanical stability and a very low friction value. Therefore it can be transported easily.

Application instructions

RAVENOL Mehrzweckfett OML is used for the lubrication of easy loaded antifriction bearings and machine components. It is also suited as multipurpose lubrication grease for vehicles.

Characteristics

  • Universal use, multipurpose characteristic for a mixed car pool
  • Extreme shear stability
  • Excellent corrosion protection
  • Excellent wear protection
  • Very good mechanical and chemical stability
  • Very good aging resistant
  • Good pumpability, even at low temperatures
Parameter Unit Value Tests
specification DIN 51502 K2K-30, ISO 6743-9: ISO-L-XCCEA2
DIN 51502 K2K-30, ISO 6743-9: ISO-L-XCCEA2
Color Light brown visual
Light brown visual
Thickener lithium soap DIN 51757
lithium soap DIN 51757
NLGI-Class 2 DIN 51818
2 DIN 51818
Product Classification K2K-30 DIN 51502
K2K-30 DIN 51502
Short term temperature up to °C 130 DIN 51757
130 °C DIN 51757
Worked Penetration at 60 Strokes 265-295 ISO 2137
265-295 ISO 2137
Corrosion (SKF Emcor dist. Water) 1 DIN 51802
1 DIN 51802
Copper Corrosion (24h/120 °C) 1 DIN 51811
1 DIN 51811
Water Resistance (3h/90 °C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
Kinematic Viscosity (Base Oil) at 40 °C mm²/s 130 DIN 51562-1
130 mm²/s DIN 51562-1
Approvals DIN 51502 K2K-30, ISO 6743-9: ISO-L-XCCEA2
DIN 51502 K2K-30, ISO 6743-9: ISO-L-XCCEA2
RAVENOL Mehrzweckfett mit Graphit

RAVENOL Mehrzweckfett mit Graphit

For lubrication

RAVENOL Mehrzweckfett mit Graphit is a lithium saponified multipurpose grease with finely divided graphite to increase heavy loads at very high temperatures.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 kg

Vendor code:
1340102-001
1340102-001-03-000

Code:
4014835200210

Volume:
5 kg

Vendor code:
1340102-005
1340102-005-03-000

Code:
4014835200265

Volume:
10 kg

Vendor code:
1340102-010
1340102-010-03-000

Code:
4014835200227

Volume:
15 kg

Vendor code:
1340102-015
 

Volume:
25 kg

Vendor code:
1340102-025
1340102-025-03-000

Code:
4014835200258

Volume:
100 g

Vendor code:
1340102-100
1340102-100-04-999

Code:
4014835844391

Volume:
180 kg

Vendor code:
1340102-180
1340102-180-03-000

Code:
4014835200272

Volume:
200 g

Vendor code:
1340102-200
 

Volume:
400 g

Vendor code:
1340102-400
1340102-400-04-999

Code:
4014835768147

RAVENOL Mehrzweckfett mit Graphit is formulated with a highly refined base oil mixture which contains less than 3% polycyclic aromatics.Through the graphite at high temperatures a lubrication film on the metals is formed, and the graphite takes lubrication to achieve optimal results.

The optimized formulation of RAVENOL Mehrzweckfett mit Graphit can also capture temperature peaks in the application.

Application instructions

RAVENOL Mehrzweckfett mit Graphit has been designed for applications exposed to high temperatures and shock loads.

RAVENOL Mehrzweckfett mit Graphit is used in oven conveyor belts, pistons in hydraulic pumps and all types of bearings that run at low speeds.

RAVENOL Mehrzweckfett mit Graphit is also used as a sealant in high temperature gaskets from steam pipes and other hot pipe connections.

Characteristics

  • Extreme shear stability
  • Excellent corrosion protection
  • Very good mechanical and chemical stability
  • Very good aging resistant
  • Good pump output also at low temperatures
Parameter Unit Value Tests
specification DIN 51502 KPF2K-30, ISO I6743-9: ISO-L-XCCFB2
DIN 51502 KPF2K-30, ISO I6743-9: ISO-L-XCCFB2
Color Black gray visual
Black gray visual
Thickener lithium soap DIN 51757
lithium soap DIN 51757
Additives graphite DIN 51757
graphite DIN 51757
NLGI-Class 2 DIN 51818
2 DIN 51818
Product Classification KPF2K-30 DIN 51502
KPF2K-30 DIN 51502
Short term temperature up to °C 130 DIN 51757
130 °C DIN 51757
Worked Penetration at 60 Strokes 265-295 ISO 2137
265-295 ISO 2137
Corrosion (SKF Emcor dist. Water) 1 DIN 51802
1 DIN 51802
Copper Corrosion (24h/120 °C) 1 DIN 51811
1 DIN 51811
Water Resistance (3h/90 °C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
Kinematic Viscosity (Base Oil) at 40 °C mm²/s 80 DIN 51562-1
80 mm²/s DIN 51562-1
Approvals DIN 51502 KPF2K-30, ISO I6743-9: ISO-L-XCCFB2
DIN 51502 KPF2K-30, ISO I6743-9: ISO-L-XCCFB2
RAVENOL Mehrzweckfett mit MoS-2

RAVENOL Mehrzweckfett mit MoS-2

For CV joint

RAVENOL Mehrzweckfett mit MoS2 is a lithium saponified multipurpose grease with finely divided MoS2 to increase heavy loads at very high temperatures.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 kg

Vendor code:
1340103-001
1340103-001-03-000

Code:
4014835200333

Volume:
5 kg

Vendor code:
1340103-005
1340103-005-03-000

Code:
4014835200357

Volume:
10 kg

Vendor code:
1340103-010
1340103-010-03-000

Code:
4014835200319

Volume:
15 kg

Vendor code:
1340103-015
 

Volume:
25 kg

Vendor code:
1340103-025
1340103-025-03-000

Code:
4014835200326

Volume:
100 g

Vendor code:
1340103-100
1340103-100-04-999

Code:
4014835844452

Volume:
180 kg

Vendor code:
1340103-180
1340103-180-03-000

Code:
4014835200371

Volume:
200 g

Vendor code:
1340103-200
 

Volume:
400 g

Vendor code:
1340103-400
1340103-400-04-999

Code:
4014835768246

RAVENOL Mehrzweckfett mit MoS2 is formulated with a highly refined base oil mixture which contains less than 3% polycyclic aromatics.

The optimized formulation of RAVENOL Mehrzweckfett mit MoS2 has distinctive friction-reducing properties and so-called dry running properties.

Application instructions

RAVENOL Mehrzweckfett mit MoS2 has been designed for applications exposed to extreme pressure and shock loaded bearings with relatively slow sliding movements.

RAVENOL Mehrzweckfett mit MoS2 is recommended for friction and roller bearings of all types during aggravated operating conditions.

RAVENOL Mehrzweckfett mit MoS2 is also used for chassis lubricating.

Characteristics

  • Extreme shear stability
  • Excellent corrosion protection
  • Very good mechanical and chemical stability
  • Very good aging resistant
  • Good pump output also at low temperatures
Parameter Unit Value Tests
specification DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
Color Black gray visual
Black gray visual
Thickener lithium soap DIN 51757
lithium soap DIN 51757
Additives molybdenum disulfide DIN 51757
molybdenum disulfide DIN 51757
NLGI-Class 2 DIN 51818
2 DIN 51818
Product Classification KPF2K-30 DIN 51502
KPF2K-30 DIN 51502
Short term temperature up to °C 130 DIN 51757
130 °C DIN 51757
Worked Penetration at 60 Strokes 265-295 ISO 2137
265-295 ISO 2137
Corrosion (SKF Emcor dist. Water) 1 DIN 51802
1 DIN 51802
Copper Corrosion (24h/120 °C) 1 DIN 51811
1 DIN 51811
Water Resistance (3h/90 °C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
Kinematic Viscosity (Base Oil) at 40 °C mm²/s 80 DIN 51562-1
80 mm²/s DIN 51562-1
Approvals DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2

Recognizing the number...