Search by VIN, equipment make, model, type or unit name, or by the part number of any oil:

Search
Toyota Forklifts, electric

Oil for Toyota, Forklifts, electric, 7FBEST15

Toyota Model (Forklifts, electric) to find out what kind of oil is used for it

Toyota Forklifts, electric 7FBEST15 Engine oil, automatic transmission fluid, manual transmission oil, antifreeze, brake fluid, power steering fluid and other fluids.

Drive: Rear wheel drive
Power:

Nodes and assemblies

Differential of drive unit

Liquid volume (basic): 4.2 L
RAVENOL SSG Spec Synt LKW Getriebeöl SAE 75W-80

RAVENOL SSG Spec Synt LKW Getriebeöl SAE 75W-80

For gearbox

RAVENOL SSG Spec Synt LKW Getriebeoel 75W-80 is a synthetic low viscosity transmission oil specifically for highly stressed manual transmissions.

Manufacturer Approved:
MAN 341 Type Z4, ZF TE-ML 01L, ZF TE-ML 02L, ZF TE-ML 16K

Compliance with the requirements:
DTFR 13D120 (MB 235.29), Eaton Extended drain, MAN 341 Type E3, MAN 341 Type VR, MAN 341 Type Z5, Voith Type C, Volvo 97305, Volvo 97307, ZF TE-ML 01E, ZF TE-ML 02E, ZF TE-ML 16P

Show more Hide details

SAE:  75W-80

API:  GL-4

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221100-001
 

Volume:
4 L

Vendor code:
1221100-004
 

Volume:
10 L

Vendor code:
1221100-010
1221100-010-01-999

Code:
4014835733848

Volume:
20 L

Vendor code:
1221100-020
1221100-020-01-999

Code:
4014835733824

Volume:
20 L, ecobox

Vendor code:
1221100-B20
1221100-B20-01-888

Code:
4014835788121

Volume:
60 L

Vendor code:
1221100-060
1221100-060-01-999

Code:
4014835733862

Volume:
60 L, print

Vendor code:
1221100-D60
 

Volume:
208 L

Vendor code:
1221100-208
1221100-208-01-999

Code:
4014835733886

Volume:
208 L, print

Vendor code:
1221100-D28
1221100-D28-01-888

Code:
4014835733800

Volume:
1000 L

Vendor code:
1221100-700
 

RAVENOL SSG Spec Synt LKW Getriebeoel 75W-80 is designed based on synthetic base oils and specially coordinated additive treatment. This exceeds the needs of today's application requirements.

RAVENOL SSG Spec Synt LKW Getriebeoel 75W-80 is outstanding for use under severe mechanical and thermal stress on transmission oils, even with extended oil change intervals.

Application instructions

RAVENOL SSG Spec Synt LKW Getriebeoel 75W-80 is a heavy duty transmission oil to care for synchronised manual transmissions in commercial vehicles with intarder or retarder. Shift comfort isnoticeably increased. Extreme oil change intervals according as specified by the manufacturer at up to 500,000 km reduce maintenance costs and increase cost-effectiveness.

Characteristics

  • Excellent thermal stability
  • High protection from rust, corrosion, foaming
  • Low solidification point
  • Excellent EP properties
  • Good shifting behaviour in low temperatures
  • Extended life
  • Fuel savings
Parameter Unit Value Tests
SAE 75W-80
75W-80
Type Synthetic
Synthetic
API GL-4
GL-4
Manufacturer Approved MAN 341 Type Z4, ZF TE-ML 01L, ZF TE-ML 02L, ZF TE-ML 16K
MAN 341 Type Z4, ZF TE-ML 01L, ZF TE-ML 02L, ZF TE-ML 16K
Recomendations DTFR 13D120 (MB 235.29), Eaton Extended drain, MAN 341 Type E3, MAN 341 Type VR, MAN 341 Type Z5, Voith Type C, Volvo 97305, Volvo 97307, ZF TE-ML 01E, ZF TE-ML 02E, ZF TE-ML 16P
DTFR 13D120 (MB 235.29), Eaton Extended drain, MAN 341 Type E3, MAN 341 Type VR, MAN 341 Type Z5, Voith Type C, Volvo 97305, Volvo 97307, ZF TE-ML 01E, ZF TE-ML 02E, ZF TE-ML 16P
specification MIL-L-2105
MIL-L-2105
Suitable for IVECO, Renault
IVECO, Renault
Density at 20 °C g/cm³ 855 EN ISO 12185
855 g/cm³ EN ISO 12185
Color Red visual
Red visual
Viscosity at 100 °C mm²/s 9.29 DIN 51562-1
9.29 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 51.97 DIN 51562-1
51.97 mm²/s DIN 51562-1
Viscosity Index VI 163 DIN ISO 2909
163 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 38.800 ASTM D2983
38.800 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1b ASTM D130
1b ASTM D130
Approvals DTFR 13D120 (MB 235.29), Eaton Extended drain, MAN 341 Type E3, MAN 341 Type VR, MAN 341 Type Z4, MAN 341 Type Z5, MIL-L-2105, Voith Type C, Volvo 97305, Volvo 97307, ZF TE-ML 01E, ZF TE-ML 01L, ZF TE-ML 02E, ZF TE-ML 02L, ZF TE-ML 16K, ZF TE-ML 16P
DTFR 13D120 (MB 235.29), Eaton Extended drain, MAN 341 Type E3, MAN 341 Type VR, MAN 341 Type Z4, MAN 341 Type Z5, MIL-L-2105, Voith Type C, Volvo 97305, Volvo 97307, ZF TE-ML 01E, ZF TE-ML 01L, ZF TE-ML 02E, ZF TE-ML 02L, ZF TE-ML 16K, ZF TE-ML 16P
Recommendations DAF/VOLVO 97305, DAF/VOLVO 97307, DTFR 13D120 (MB 235.29), Eaton (Extended drain), IVECO, MAN 341 E3, MAN 341 VR, MAN 341 Z5, Renault, VOLVO 97317, Voith Typ C, ZF TE-ML 01E, ZF TE-ML 02E, ZF TE-ML 16P
DAF/VOLVO 97305, DAF/VOLVO 97307, DTFR 13D120 (MB 235.29), Eaton (Extended drain), IVECO, MAN 341 E3, MAN 341 VR, MAN 341 Z5, Renault, VOLVO 97317, Voith Typ C, ZF TE-ML 01E, ZF TE-ML 02E, ZF TE-ML 16P
RAVENOL MTF-2 SAE 75W-80

RAVENOL MTF-2 SAE 75W-80

For gearbox

RAVENOL MTF-2 SAE 75W-80 is a PAO based full synthetic low-viscosity transmission oil for modern manual transmission.

Compliance with the requirements:
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538

Buy Online
Show more Hide details

SAE:  75W-80

API:  GL-4 MT-1

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1221103-001
1221103-001-01-999

Code:
4014835719712

Volume:
4 L

Vendor code:
1221103-004
1221103-004-01-999

Code:
4014835719798

Volume:
10 L

Vendor code:
1221103-010
1221103-010-01-999

Code:
4014835719743

Volume:
20 L

Vendor code:
1221103-020
 

Volume:
20 L, ecobox

Vendor code:
1221103-B20
1221103-B20-01-888

Code:
4014835788428

Volume:
60 L

Vendor code:
1221103-060
1221103-060-01-999

Code:
4014835719767

Volume:
60 L, print

Vendor code:
1221103-D60
 

Volume:
208 L

Vendor code:
1221103-208
 

Volume:
208 L, print

Vendor code:
1221103-D28
 

Volume:
1000 L

Vendor code:
1221103-700
 

RAVENOL MTF-2 SAE 75W-80 is designed based on special selected base oils and specially coordinated additive treatment. This exceeds the needs of today's application requirements.

RAVENOL MTF-2 SAE 75W-80 is outstanding for use under severe mechanical and thermal stress on transmission oils, even with extended oil change intervals.

Application instructions

RAVENOL MTF-2 SAE 75W-80 is a full synthetic transmission oil for manual transmissions.

Characteristics

  • A high-pressure stable lubricating film even at high oil temperatures and under high stress.
  • Outstanding shearing stability and excellent thermal stability.
  • Excellent viscosity-temperature properties.
  • High oxidation stability.
  • Excellent wear protection, outstanding EP properties.
  • Low foaming property even at high speeds
  • Good shifting behaviour even in low temperatures, extremely low pour point.
  • Extended life.
Parameter Unit Value Tests
SAE 75W-80
75W-80
Type Full synthetic
Full synthetic
API GL-4, MT-1
GL-4, MT-1
Recomendations BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
Density at 20 °C g/cm³ 847.5 EN ISO 12185
847.5 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 9.1 DIN 51562-1
9.1 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 50.8 DIN 51562-1
50.8 mm²/s DIN 51562-1
Viscosity Index VI 163 DIN ISO 2909
163 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 21.900 ASTM D2983
21.900 mPa*s ASTM D2983
Copper Strip Test at 121 °C 1b ASTM D130
1b ASTM D130
Approvals BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
BMW 23001434404 CROSS, BMW 23007533513 CROSS, BMW 83220309031 CROSS, BMW MTF-LT-1 N, BMW MTF-LT-2 N, Fiat 9.55550-MZ2, Fiat F178.B06, Ford WSS-M2C 200-C3, Ford WSS-M2C 200-D2, MB 235.10, MTF-94, PSA B71 2330, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW G 052 911, VW G 055 532, VW G 055 538
Recommendations AC Delco 10-403, Audi G052532, Audi G055532, BMW 23001434404 MTF-LT-1, BMW 23007533513 MTF-LT-2, BMW 83220309031 MTF-LT-1, Fiat 14621616, Fiat 9.55550-MZ2, Fiat F178.B06, Ford 1382914, Ford 1547953, Ford WSS-M2C200-C3, Ford WSS-M2C200-D2, GM 1940711, GM 88861800, GM 88861801, Honda 08261-99964 Genuine MTF Fluid, Honda 08798-9031 MTF-7289, Hyundai 02200-00130 TOD, Land Rover STC 9157, Land Rover STC 9158, Land Rover TYK500030, MB 235.10 (A 001 989 26 03), MTF-94 Fluid für Land Rover, MG und Mini Cooper, Mitsubishi 3005401, Mitsubishi MZ312644, Nissan 999MP-MTF20P, Nissan KE91699932R, PSA B71 2330, Peugeot 9730A2, Subaru K0321-F0090, Toyota 08885-00705, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW/Audi G 052 911 A2, VW/Audi G 055 538 A2 für ZF 6S450 Amarok 0C6, Volvo 1161681, Volvo 1161745
AC Delco 10-403, Audi G052532, Audi G055532, BMW 23001434404 MTF-LT-1, BMW 23007533513 MTF-LT-2, BMW 83220309031 MTF-LT-1, Fiat 14621616, Fiat 9.55550-MZ2, Fiat F178.B06, Ford 1382914, Ford 1547953, Ford WSS-M2C200-C3, Ford WSS-M2C200-D2, GM 1940711, GM 88861800, GM 88861801, Honda 08261-99964 Genuine MTF Fluid, Honda 08798-9031 MTF-7289, Hyundai 02200-00130 TOD, Land Rover STC 9157, Land Rover STC 9158, Land Rover TYK500030, MB 235.10 (A 001 989 26 03), MTF-94 Fluid für Land Rover, MG und Mini Cooper, Mitsubishi 3005401, Mitsubishi MZ312644, Nissan 999MP-MTF20P, Nissan KE91699932R, PSA B71 2330, Peugeot 9730A2, Subaru K0321-F0090, Toyota 08885-00705, Toyota MTF 97309, Toyota MTF ETL8997B, Toyota MTF XT4447 M+, VW/Audi G 052 911 A2, VW/Audi G 055 538 A2 für ZF 6S450 Amarok 0C6, Volvo 1161681, Volvo 1161745

Hydraulic brake system

Liquid volume (basic): 0.1 L
RAVENOL DOT 4

RAVENOL DOT 4

For brake system

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
250 ml

Vendor code:
1350601-250
1350601-250-05-000

Code:
4014835692121

Volume:
500 ml

Vendor code:
1350601-500
1350601-500-05-000

Code:
4014835692152

Volume:
1 L

Vendor code:
1350601-001
1350601-001-01-000

Code:
4014835692114

Volume:
20 L

Vendor code:
1350601-020
 

Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J 1704, ISO 4925 and the safety regulations FMVSS 116 DOT 3 and DOT 4 from the United States of America are exceeded.

Application Note

RAVENOL DOT can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.

RAVENOL DOT is miscible with all known brake fluids of the same specification. To use the high performance level of RAVENOL DOT , a complete change of the brake fluid is recommended.

RAVENOL DOT is not suitable for vehicles with mineral oil systems (e.g. certain Citroën models).

FOLLOW VEHICLE MANUFACTURERS RECOMMENDATIONS WHEN ADDING BRAKE FLUID KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ADSORPTION OF WATER. CAUTION! DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

Dispose of used brake fluid responsibly (EU waste code 160113).

Brake fluid damages paint work –if spilt wash off immediately with plenty of water.

Characteristics

  • optimum ABS characteristics
  • chemical stability
  • best lubrication efficiency
  • neutral behaviour regarding brake parts
  • low viscosity at low temperatures
  • miscible with all brake fluids of the same specifications
Parameter Unit Value Tests
Type Synthetic
Synthetic
specification DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704
Density at 20 °C g/cm³ 1052 EN ISO 12185
1052 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mPa*s 2.41 ASTM D445
2.41 mPa*s ASTM D445
Viscosity at -40 °C cSt 1340 ASTM D445
1340 cSt ASTM D445
Wet Equilibrium Reflux Boiling Point °C 169 FMVSS 116
169 °C FMVSS 116
High Temperature Stability °C -1 FMVSS 116
-1 °C FMVSS 116
Chemical Stability °C 1 FMVSS 116
1 °C FMVSS 116
Evaporation %w/w 61 FMVSS 116
61 %w/w FMVSS 116
Fluidity & Appearance at -40 °C i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
Fluidity & Appearance at -50 °C i.O., 8s FMVSS 116
i.O., 8s FMVSS 116
Water Tolerance at -40 °C transparent, 3s FMVSS 116
transparent, 3s FMVSS 116
Water Tolerance at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at -40 °C Transparent FMVSS 116
Transparent FMVSS 116
Compatibility at +60 °C Transparent FMVSS 116
Transparent FMVSS 116
Tinned Iron Δ mg/cm² 0.04 FMVSS 116
0.04 Δ mg/cm² FMVSS 116
Steel mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Aluminium mg/cm² 0.02 FMVSS 116
0.02 mg/cm² FMVSS 116
Cast Iron Δ mg/cm² -0,03 FMVSS 116
-0,03 Δ mg/cm² FMVSS 116
Brass mg/cm² -0.08 FMVSS 116
-0.08 mg/cm² FMVSS 116
Copper mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Zinc mg/cm² 0.01 FMVSS 116
0.01 mg/cm² FMVSS 116
Rubber Diameter Change 0.16 FMVSS 116
0.16 FMVSS 116
Hardness Change °IRHD -4 FMVSS 116
-4 °IRHD FMVSS 116
Appearance i.O. FMVSS 116
i.O. FMVSS 116
SBR at 70 °C mm 0.56 FMVSS 116
0.56 mm FMVSS 116
SBR at 120 °C mm 0.73 FMVSS 116
0.73 mm FMVSS 116
EPDM at 70 °C (as required by SAE J1703) IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
EPDM at 120 °C IRHD -2 FMVSS 116
-2 IRHD FMVSS 116
Natural at 70 °C (as required by ISO 4925) mm 0.38 FMVSS 116
0.38 mm FMVSS 116
Approvals DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704

Hydraulic system

Liquid volume (basic): 18 L
RAVENOL Hydraulikoel TS 32 (HLP)

RAVENOL Hydraulikoel TS 32 (HLP)

For hydraulics

RAVENOL Hydraulikoel TS 32 (HLP) is optimal alloyed mineral hydraulic oil with a high performance level and a wide application area of the whole industry.

Compliance with the requirements:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, FZG Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller , Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest

Show more Hide details

SAE:  32W

  • Available packaging
  • Full description
  • Product parameters

Volume:
1 L

Vendor code:
1323104-001
1323104-001-01-999

Code:
4014835759312

Volume:
5 L

Vendor code:
1323104-005
1323104-005-01-999

Code:
4014835759350

Volume:
20 L

Vendor code:
1323104-020
1323104-020-01-999

Code:
4014835759329

Volume:
20 L, ecobox

Vendor code:
1323104-B20
 

Volume:
60 L

Vendor code:
1323104-060
1323104-060-01-999

Code:
4014835759367

Volume:
208 L

Vendor code:
1323104-208
1323104-208-01-999

Code:
4014835759381

Volume:
1000 L

Vendor code:
1323104-700
 

RAVENOL Hydraulikoel TS 32 (HLP) with efficient additives offers an excellent corrosion protection even under extreme loads. The behaviour of sealing materials is neutral.

RAVENOL Hydraulikoel TS 32 (HLP) is characterised by good viscosity temperature behaviour, a high aging resistant and a solid corrosion protection.

Application instructions

RAVENOL Hydraulikoel TS 32 (HLP) is for universally use in all hydraulic systems.

RAVENOL Hydraulikoel TS 32 (HLP) is recommended in high performance hydraulic systems with high pressure pumps of all types, in sensitive control systems.

RAVENOL Hydraulikoel TS 32 (HLP) is used for hydraulic systems in agriculture, to supply small gearboxes and for use in circulating systems.

Characteristics

  • a high performance level
  • a very good viscosity temperature behaviour
  • a high aging resistant
  • an excellent corrosion protection
  • a solid corrosion protection
  • neutrality of sealing materials
Parameter Unit Value Tests
SAE 32W
32W
Type Mineral
Mineral
ASTM D6158
D6158
Recomendations AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, FZG Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller , Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, FZG Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller , Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
specification DIN 51524-2, ISO 6743-4 HM
DIN 51524-2, ISO 6743-4 HM
Suitable for Atos, Metso
Atos, Metso
Density at 20 °C g/cm³ 848 EN ISO 12185
848 g/cm³ EN ISO 12185
Color light yellow visual
light yellow visual
Viscosity at 100 °C mm²/s 5.8 DIN 51562-1
5.8 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 32.1 DIN 51562-1
32.1 mm²/s DIN 51562-1
Viscosity Index VI 123 DIN ISO 2909
123 DIN ISO 2909
Approvals AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, DIN 51524-2, Danieli Hydraulics, Eaton Vickers I-286-S, FZG Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller , Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, DIN 51524-2, Danieli Hydraulics, Eaton Vickers I-286-S, FZG Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller , Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
Recommendations AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, FZG-Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, MIL-PRF-17672 E, Metso, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest
AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, FZG-Test A 8,3/90, Fives Cincinnati P-38, Fives Cincinnati P-68, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, MIL-PRF-17672 E, Metso, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, SEB 181.222, Sauer-Danfoss 520L0463, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest

Chassis and mast grease fittings

RAVENOL Hochleistungsfett mit MOS 2

RAVENOL Hochleistungsfett mit MOS 2

Grease
Show more Hide details
  • Available packaging
  • Product parameters

Volume:
90 g

Vendor code:
1340108-090
1340108-090-04-000

Volume:
100 g

Vendor code:
1340108-100
1340108-100-04-999

Code:
4014835847422

RAVENOL Mehrzweckfett mit MoS-2

RAVENOL Mehrzweckfett mit MoS-2

For CV joint

RAVENOL Mehrzweckfett mit MoS2 is a lithium saponified multipurpose grease with finely divided MoS2 to increase heavy loads at very high temperatures.

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 kg

Vendor code:
1340103-001
1340103-001-03-000

Code:
4014835200333

Volume:
5 kg

Vendor code:
1340103-005
1340103-005-03-000

Code:
4014835200357

Volume:
10 kg

Vendor code:
1340103-010
1340103-010-03-000

Code:
4014835200319

Volume:
15 kg

Vendor code:
1340103-015
 

Volume:
25 kg

Vendor code:
1340103-025
1340103-025-03-000

Code:
4014835200326

Volume:
100 g

Vendor code:
1340103-100
1340103-100-04-999

Code:
4014835844452

Volume:
180 kg

Vendor code:
1340103-180
1340103-180-03-000

Code:
4014835200371

Volume:
200 g

Vendor code:
1340103-200
 

Volume:
400 g

Vendor code:
1340103-400
1340103-400-04-999

Code:
4014835768246

RAVENOL Mehrzweckfett mit MoS2 is formulated with a highly refined base oil mixture which contains less than 3% polycyclic aromatics.

The optimized formulation of RAVENOL Mehrzweckfett mit MoS2 has distinctive friction-reducing properties and so-called dry running properties.

Application instructions

RAVENOL Mehrzweckfett mit MoS2 has been designed for applications exposed to extreme pressure and shock loaded bearings with relatively slow sliding movements.

RAVENOL Mehrzweckfett mit MoS2 is recommended for friction and roller bearings of all types during aggravated operating conditions.

RAVENOL Mehrzweckfett mit MoS2 is also used for chassis lubricating.

Characteristics

  • Extreme shear stability
  • Excellent corrosion protection
  • Very good mechanical and chemical stability
  • Very good aging resistant
  • Good pump output also at low temperatures
Parameter Unit Value Tests
specification DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
Color Black gray visual
Black gray visual
Thickener lithium soap DIN 51757
lithium soap DIN 51757
Additives molybdenum disulfide DIN 51757
molybdenum disulfide DIN 51757
NLGI-Class 2 DIN 51818
2 DIN 51818
Product Classification KPF2K-30 DIN 51502
KPF2K-30 DIN 51502
Short term temperature up to °C 130 DIN 51757
130 °C DIN 51757
Worked Penetration at 60 Strokes 265-295 ISO 2137
265-295 ISO 2137
Corrosion (SKF Emcor dist. Water) 1 DIN 51802
1 DIN 51802
Copper Corrosion (24h/120 °C) 1 DIN 51811
1 DIN 51811
Water Resistance (3h/90 °C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
Kinematic Viscosity (Base Oil) at 40 °C mm²/s 80 DIN 51562-1
80 mm²/s DIN 51562-1
Approvals DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
DIN 51502 KPF2K-30, ISO 6743-9: ISO-L-XCCIB2
RAVENOL Super EP-Langzeitfett

RAVENOL Super EP-Langzeitfett

For bearings

RAVENOL Super EP-Langzeitfett is a high quality grease with heavy-metal-free EP additives. This generation of additive packages ensures a long life of the parts to be lubricated and reduces maintenance costs.

Manufacturer Approved:
LOVAT LOV-204

Show more Hide details
  • Available packaging
  • Full description
  • Product parameters

Volume:
1 kg

Vendor code:
1340104-001
1340104-001-03-000

Code:
4014835200418

Volume:
5 kg

Vendor code:
1340104-005
1340104-005-03-000

Code:
4014835200456

Volume:
10 kg

Vendor code:
1340104-010
1340104-010-03-000

Code:
4014835200463

Volume:
15 kg

Vendor code:
1340104-015
1340104-015-03-000

Code:
4014835200432

Volume:
25 kg

Vendor code:
1340104-025
1340104-025-03-000

Code:
4014835200425

Volume:
100 g

Vendor code:
1340104-100
1340104-100-04-999

Code:
4014835844513

Volume:
180 kg

Vendor code:
1340104-180
1340104-180-03-000

Code:
4014835200708

Volume:
200 g

Vendor code:
1340104-200
 

Volume:
400 g

Vendor code:
1340104-400
1340104-400-04-999

Code:
4014835768345

RAVENOL Super EP-Langzeitfett is due to its smooth structure is easily conveyed.

RAVENOL Super EP-Langzeitfett is based on high-quality base oil by using lithium soaps (Li-12-hydroxy stearate) as thickener.

Due to this they avail of an outstanding work resistance. Futhermore, RAVENOL Super EP-Langzeitfett contain additives to improve the rust and corrosion-preventing behaviour.

Application instructions

RAVENOL Super EP-Langzeitfett is used for the lubrication of heavily loaded plain and rolling bearings under the influence of moisture, vibration and shock loads. The standard applies to the lubrication of chassis, wheel bearings and universal joints in the automotive sector as well as machinery and general industry, construction industry, agriculture.

Characteristics

  • Universal application, multi-purpose mixed pattern for machinery
  • Excellent impact and wear-EP
  • Very good oxidation and corrosion protection even in the presence of moisture
  • Very good mechanical stability
  • Excellent water resistance
  • Long service life and thus extended lubrication intervals possible
  • Very good resistance to aging
  • Good pumpability, even at low temperatures
Parameter Unit Value Tests
Type Mineral
Mineral
Manufacturer Approved LOVAT LOV-204
LOVAT LOV-204
specification DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2
Color Brown visual
Brown visual
Thickener lithium soap DIN 51757
lithium soap DIN 51757
NLGI-Class 2 DIN 51818
2 DIN 51818
Product Classification KP2K-30 DIN 51502
KP2K-30 DIN 51502
Short term temperature up to °C 130 DIN 51757
130 °C DIN 51757
Worked Penetration at 60 Strokes 265-295 ISO 2137
265-295 ISO 2137
Corrosion (SKF Emcor dist. Water) 1 DIN 51802
1 DIN 51802
Copper Corrosion (24h/120 °C) 1 DIN 51811
1 DIN 51811
Water Resistance (3h/90 °C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
Kinematic Viscosity (Base Oil) at 40 °C mm²/s 130 DIN 51562-1
130 mm²/s DIN 51562-1
Approvals DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204

Recognizing the number...